journal article·2026-03-31

Development of bio-reinforced PLA filaments using short bamboo fibers for enhanced mechanical performance in FDM 3D printing

Sathish Kumar Adapa, Jagadish, Srinivasu Gangi Setti

Publisher page

Abstract

Fused deposition modeling (FDM) is abundantly adopted in various industries due to its enormous features among the other additive manufacturing techniques. To improve the biodegradability and properties of polymer components printed by FDM process, in this study, polylactic acid reinforced with short bamboo fibers (PLASBF) at different weight percentages (i.e., 03, 06, and 09) and with coupling agents were prepared using a melt mixer; PLA composite filaments were extracted via filament extruder setup. Further, PLA composite samples were prepared by using FDM. The surface texture and chemical compounds of short bamboo fibers (SBFs) were studied by SEM, EDX and FTIR. Also, the mechanical characterization of PLA composite specimens was investigated. The result shows that, the improved surface texture and enhanced hydrophobicity of SBFs were identified as compared to untreated SBFs. Additionally, the ultimate tensile strength of PLASBF09 increased (i.e., 80.68 MPa) among the other compositions and virgin PLA as well. Also, the flexural strength of PLASBF03 is significantly improved (i.e., 128.48 MPa) as compared to other compositions and neat PLA samples. The developed new class of PLA based short bamboo filament is suggestible as a feed stock material for FDM, small scale vendors, researchers and industrial applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology

Aditya Institute of Technology and Management

Indian Statistical Institute

References (60)

Show source-provided references
1. 10.1038/s41598-024-59439-z10.1038/s41598-024-59439-z ↗
2. Thakur V, Singh R, Kumar R, et al. Mechanically sustainable and primary recycled thermo-responsive ABS–PLA polymer composites for 4D printing applications: fabrication and studies. Rev Adv Mater Sci 2024; 63: 1–14. https://doi.org/10.1515/rams-2023-0149
3. 10.1007/s00170-019-03313-010.1007/s00170-019-03313-0 ↗
4. 10.1016/j.cirpj.2021.01.00210.1016/j.cirpj.2021.01.002 ↗
5. 10.1016/j.matpr.2019.07.01610.1016/j.matpr.2019.07.016 ↗
6. Elfaleh I, Nasri FAM, Habibi M, et al. A comprehensive review of natural fibres and their composites: an eco-friendly alternative to conventional materials. Results Eng 2023; 1(101271): 1–31.
7. 10.1007/s11837-016-2213-610.1007/s11837-016-2213-6 ↗
8. 10.3390/jcs101000710.3390/jcs1010007 ↗
9. 10.1108/RPJ-11-2017-024210.1108/RPJ-11-2017-0242 ↗
10. 10.1002/pat.452410.1002/pat.4524 ↗
11. 10.1016/j.compositesb.2019.01.08510.1016/j.compositesb.2019.01.085 ↗
12. 10.1016/j.compscitech.2019.10788710.1016/j.compscitech.2019.107887 ↗
13. 10.1080/15440478.2022.216218310.1080/15440478.2022.2162183 ↗
14. 10.3390/polym1522436810.3390/polym15224368 ↗
15. 10.1007/s13726-024-01315-810.1007/s13726-024-01315-8 ↗
16. 10.3390/polym1608114010.3390/polym16081140 ↗
17. 10.3390/polym1418392310.3390/polym14183923 ↗
18. 10.1016/j.matdes.2014.06.05810.1016/j.matdes.2014.06.058 ↗
19. Singh B, Dessalegn MY. Effect analysis of extraction processes of bamboo fiber. Volatiles Essent Oils 2021; 8: 4226–4246.
20. 10.1016/j.matchemphys.2017.06.04010.1016/j.matchemphys.2017.06.040 ↗
21. 10.1016/j.compositesb.2015.05.03310.1016/j.compositesb.2015.05.033 ↗
22. Ranjan N, Singh M, Singh D, et al. Chapter 5 - hydrogels for additive manufacturing in scaffolding applications: a review. Innov Process Mater Addit Manuf 2023: 103–129.
23. 10.1177/152808371665446810.1177/1528083716654468 ↗
24. 10.1080/15440478.2011.55100210.1080/15440478.2011.551002 ↗
25. 10.1016/j.compositesb.2015.05.03310.1016/j.compositesb.2015.05.033 ↗
26. 10.1080/02773813.2012.74807710.1080/02773813.2012.748077 ↗
27. 10.1039/C5GC00563A10.1039/C5GC00563A ↗
28. 10.1002/marc.20210086210.1002/marc.202100862 ↗
29. 10.1088/2053-1591/ab2de210.1088/2053-1591/ab2de2 ↗
30. 10.14504/ajr.5.6.410.14504/ajr.5.6.4 ↗
31. 10.1080/15440478.2024.233269810.1080/15440478.2024.2332698 ↗
32. 10.1007/s13399-023-03843-410.1007/s13399-023-03843-4 ↗
33. Sheeba KRJ, Priya RK, Arunachalam KP, et al. Enhancing structural, thermal, and mechanical properties of Acacia pennata natural fibers through benzoyl chloride treatment for construction applications. Case Stud Constr Mater 2023; 20: e02443. https://doi.org/10.1016/j.cscm.2023.e02443
34. 10.1177/0892705723115192810.1177/08927057231151928 ↗
35. 10.3390/ma810532710.3390/ma8105327 ↗
36. 10.1177/0892705725131623410.1177/08927057251316234 ↗
37. 10.1177/095441191985281110.1177/0954411919852811 ↗
38. Adapa SK. Jagadish. Design and fabrication of internal mixer and filament extruder for extraction of hybrid filament composite for FDM applications. Int J Interact Des Manuf 2023; 18(1): 1–14.
39. 10.3390/polym1107114610.3390/polym11071146 ↗
40. Findura P, Obidziński S, Żukiewicz-sobczak W. Mechanical properties and biodegradability of samples obtained by 3D printing using FDM technology from PLA filament with by-products. Sci Rep 2025; 15 (5847):1–13.
41. 10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
42. 10.1016/j.rineng.2024.10239610.1016/j.rineng.2024.102396 ↗
43. 10.1007/s42452-020-1936-810.1007/s42452-020-1936-8 ↗
44. Omar L, Zambrano-robledo P, Reyes-osorio LA, et al. Mechanical characterisation of a bamboo fibre/polylactic acid composite produced by fused deposition modelling. J Rein Plast Compos 2020; 39: 23–24.
45. 10.3390/molecules2921508710.3390/molecules29215087 ↗
46. Wang A, Tang X, Zeng Y, et al. Carbon fiber-reinforced PLA composite for fused deposition. Polymers 2024; 16: 1–11.
47. 10.3390/jcs701002710.3390/jcs7010027 ↗
48. 10.1016/j.jmrt.2023.10.14810.1016/j.jmrt.2023.10.148 ↗
49. 10.3390/polym1613176010.3390/polym16131760 ↗
50. 10.1016/j.jmrt.2025.03.18410.1016/j.jmrt.2025.03.184 ↗
51. Tisserat B, Liu Z, Finkenstadt V, et al. 3D printing biocomposites. Plast Res 2015; 10–12: 1–3.
52. 10.3390/jcs101000810.3390/jcs1010008 ↗
53. Gkartzou E, Koumoulos EP, Charitidis CA. Production and 3D printing processing of bio-based thermoplastic filament. Manuf Rev 2017; 4(1): 1–14. https://doi.org/10.1051/mfreview/2016020
54. 10.1016/j.compscitech.2018.10.00810.1016/j.compscitech.2018.10.008 ↗
55. 10.1002/pc.2497110.1002/pc.24971 ↗
56. 10.1016/j.eurpolymj.2018.07.03510.1016/j.eurpolymj.2018.07.035 ↗
57. 10.1108/RPJ-08-2017-016210.1108/RPJ-08-2017-0162 ↗
58. Tsou C, Yao W, Wu C, et al. Preparation and characterization of renewable composites from Polylactide and Rice husk for 3D printing applications. J Poly Res 2019; 26-227: 1–10. https://doi.org/10.1007/s10965-019-1882-610.1007/s10965-019-1882-6 ↗
59. 10.1080/15440478.2024.240986810.1080/15440478.2024.2409868 ↗
60. 10.3390/su1607263510.3390/su16072635 ↗