An efficient approach for predicting low-velocity impact force and damage in composite laminates
Source abstract
Abstract
Abstract An efficient approach is presented to predict the critical impact force and corresponding damage in composite laminates subjected to low-velocity impact. In developing such approach, stress analysis was conducted first for a 4 mm thick quasi-isotropic laminate to determine the potential failure modes and locations under the critical impact force. Three finite element models were subsequently built to simulate the damage in the upper, middle and lower interfaces and investigate the effect of each damage mode on the laminate stiffness. It is found that delamination adjacent to the impact point is suppressed by the high compressive through-thickness stress resulting in negligible reduction of the laminate stiffness. Both the delamination in interfaces adjacent to the mid-thickness plane and matrix fracture on the lower face can cause the first load drop, which corresponds to the critical impact force. The former is the main causative mechanism for the laminate studied in this paper. A simplified and efficient finite element model, which takes account of the delamination damage adjacent to the mid-thickness plane and the lower face, is developed that is computationally affordable and delivers acceptable prediction of the critical impact force, damage shape and size, by both quasi-static load and dynamic impact analyses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Prediction of impact-induced delamination in cross-ply composite laminates using cohesive interface elements10.1016/j.compscitech.2007.06.015 ↗
2. Simulation of multiple delaminations in impacted cross-ply laminates using a finite element model based on cohesive interface elements10.1016/j.compscitech.2008.10.025 ↗
3. Predicting low-velocity impact damage in composites by a quasi-static load model with cohesive interface elements10.1017/S0001924000007685 ↗
4. Liu HQ. Ply clustering effect on composite laminates under low-velocity impact Using FEA [MSc Thesis]. Cranfield University, UK; 2012.
5. Nonlinear progressive damage model for composite laminates used for low-velocity impact10.1007/s10483-013-1733-7 ↗
6. Simulation of low velocity impact on fiber laminates using a cohesive zone based delamination model10.1016/S0266-3538(03)00256-2 ↗
7. Finite element modelling of damage induced by low-velocity impact on composite laminates10.1016/j.compstruct.2013.09.004 ↗
8. Low velocity impact modelling in laminate composite panels with discrete interface elements10.1016/j.ijsolstr.2009.03.010 ↗
9. Modelling the simulation of impact induced damage onset and evolution in composites10.1016/j.compositesb.2014.05.024 ↗
10. Low-velocity impact damage on dispersed stacking sequence laminates. Part II: numerical simulations10.1016/j.compscitech.2009.02.015 ↗
11. Effects of ply clustering in laminated composite plates under low-velocity impact loading10.1016/j.compscitech.2010.12.018 ↗
12. Assessment of impact damage resistance and tolerance of polymer nanofiber interleaved composite laminates
13. A new composite structure impact performance assessment program10.1016/j.compscitech.2005.09.009 ↗
14. Impact damage prediction in carbon fiber-reinforced laminated composite using the matrix-reinforced mixing theory10.1016/j.compstruct.2013.04.021 ↗
15. Impact resistance and damage characteristics of composite laminates10.1016/S0263-8223(03)00114-4 ↗
16. Delamination threshold loads for low velocity impact on composite laminates10.1016/S1359-835X(00)00061-0 ↗
17. Delamination threshold load for dynamic impact on plates10.1016/j.ijsolstr.2005.05.005 ↗
18. Indentation-flexure and low-velocity impact damage in graphite epoxy laminates10.1520/CTR10361J ↗
19. Brindle AR, Zhang X. Predicting the compression-after-impact performance of carbon fibre composites based on impact response. In: Proc 17th int conf in composite materials (ICCM17), Edinburgh, UK; 27–31, July 2009.
20. Sjoblom P. Simple design approach against low velocity impact damage. In: Proc 32nd SAMPE symposium, Anaheim, CA; 1987. p. 529–39.
21. Davies GAO, Robinson P. Predicting failure by debonding/delamination. In: AGARD: 74th structures and materials meeting. 1992.
22. Numerical modeling of impact damage10.1016/S0010-4361(94)80004-9 ↗
23. Impact damage prediction in carbon composite structures10.1016/0734-743X(94)00039-Y ↗
24. Impact damage in composite aircraft structures—experimental testing and numerical simulation10.1243/0954410981532414 ↗
25. Effect of resin and fibre properties on impact and compression after impact performance of CFRP10.1016/S1359-835X(01)00141-5 ↗
26. Olsson R. A review of impact experiments at FFA during 1986 to 1998. The Aeronautical Research Institute of Sweden. FFA TN 1999-08, 1999.
27. Bridlle AR. Predicting the damage tolerance of carbon fibre coupons based on impact response [MSc Thesis]. Cranfield University, UK; 2006.
28. Quasi-static simulation of constrained layered damped laminated curvature shells subjected to low-velocity impact10.1016/j.compositesb.2011.02.012 ↗
29. The use of quasi-static testing to obtain the low-velocity impact damage resistance of marine GRP laminates10.1016/j.compositesb.2012.01.002 ↗
30. Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact10.1016/j.compstruct.2015.01.050 ↗
31. Strength prediction of bolted joints in graphite/epoxy composite laminates10.1016/S1359-8368(02)00033-1 ↗
32. Abaqus analysis user’s manual v. 6.11, 35.1.10. Surface-based cohesive behaviour.