journal article·2018-09

Effect of manufacturing defect on mechanical performance of plain weave carbon/epoxy composite based on 3D geometrical reconstruction

Panding Wang, Hongshuai Lei, Xiaolei Zhu, Haosen Chen, Changxian Wang, Daining Fang

Publisher page

Abstract

Abstract The investigation on the effect of manufacturing defect on the mechanical performance of composite is essential for the design and application in practice. In this study, the plain weave carbon fiber reinforced polymer (CFRP) laminates are fabricated by the autoclave process and vacuum bag process (VBP), respectively. Uniaxial tensile testes are conducted with a digital image correlation (DIC) system to obtain the macroscopic mechanical performance and local strain distribution. The internal microdefects of composite laminates are captured by micron-resolution computed tomography (μCT) detection technique, including the size and distribution of void, total volume fraction and geometrical parameters of yarns. Based on the Texgen software and Monte-Carlo algorithm, virtual samples with various void contents are constructed to evaluate the impact of defect using finite element solver ABAQUS/Standard. To substantiate this work, we present a comparative study considering both autoclave and VBP. The effect of void defect on the mechanical performances of CFRP laminate is analyzed through finite element method (FEM). The results reveal that the effect of void defect on the surface strain distribution of laminate is significant, especially the value of maximum strain, which will increase obviously with the void defect content. In addition, the overall stiffness predicted by numerical simulation, taking the effect of void defect into account, is lower than that of theoretical.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Optical measurement and interference techniques · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Fabrication and testing of composite orthogrid sandwich cylinder10.1016/j.compscitech.2017.02.009 ↗
2. Influence of manufacturing defects on modal properties of composite pyramidal truss-like core sandwich cylindrical panels10.1016/j.compscitech.2017.05.007 ↗
3. Progressive damage analysis and strength properties of fiber-bar composites reinforced by three-dimensional weaving under uniaxial tension10.1016/j.compstruct.2016.01.050 ↗
4. Modal response of all-composite corrugated sandwich cylindrical shells10.1016/j.compscitech.2015.04.015 ↗
5. Manufacturing defects in composite structures
6. Experimental characterization of voids in high fibre volume fraction composites processed by high injection pressure RTM10.1016/j.compositesa.2015.11.042 ↗
7. A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures10.1007/s00170-017-0096-5 ↗
8. Effect of material and process variables on the performance of resin-transfer-molded epoxy fabric composites10.1002/1097-4628(20000906)77:10<2149::AID-APP7>3.0.CO;2-J ↗
9. Tackification of textile fiber preforms in resin transfer molding10.1177/002199801772661452 ↗
10. Effects of cure pressure induced voids on the mechanical strength of carbon/epoxy laminates
11. Qualitative separation of the effect of voids on the static mechanical properties of hygrothermally conditioned carbon/epoxy composites10.3144/expresspolymlett.2011.69 ↗
12. Effects of quasi-3D stacking architecture on interlaminar shear strength and void content of FRP10.1002/app.41076 ↗
13. Effect of manufacturing defects on mechanical properties and failure features of 3D orthogonal woven C/C composites
14. The influence of porosity on the interlaminar shear strength of carbon/epoxy and carbon/bismaleimide fabric laminates10.1016/S0266-3538(01)00157-9 ↗
15. The influence of processing techniques on the matrix distribution and filtration of clay in a fibre reinforced nanocomposite10.1016/j.compositesb.2015.08.067 ↗
16. Geometrical modelling of 3D woven reinforcements for polymer composites: prediction of fabric permeability and composite mechanical properties10.1016/j.compositesa.2013.10.004 ↗
17. Characterising the loading direction sensitivity of 3D woven composites: effect of z-binder architecture10.1016/j.compositesa.2016.08.028 ↗
18. Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography10.1016/j.compstruct.2014.04.026 ↗
19. 3D composite reinforcement meso F.E. analyses based on X-ray computed tomography10.1016/j.compstruct.2015.07.005 ↗
20. Characterizing three-dimensional textile ceramic composites using synchrotron X-ray micro-computed-tomography10.1111/j.1551-2916.2011.04802.x ↗
21. Stochastic characterisation methodology for 3-D textiles based on micro-tomography10.1016/j.compstruct.2017.03.107 ↗
22. Contrast enhancement in visualisation of woven composite architecture using a MicroCT Scanner. Part 2: Tow and preform coatings10.1016/j.compositesa.2009.04.002 ↗
23. Contrast enhancement in visualisation of woven composite tow architecture using a MicroCT Scanner. Part 1: Fabric coating and resin additives10.1016/j.compositesa.2008.12.016 ↗
24. Multi-scale modelling of strongly heterogeneous 3D composite structures using spatial Voronoi tessellation10.1016/j.jmps.2015.12.024 ↗
25. Perturbation-based stochastic multi-scale computational homogenization method for woven textile composites10.1016/j.ijsolstr.2015.09.008 ↗
26. Virtual specimens for analyzing strain distributions in textile ceramic composites10.1016/j.compositesa.2016.02.030 ↗
27. The features of finite-element modeling of a structural element of flexible woven composites
28. Fibre prestressed composites: Theoretical and numerical modelling of unidirectional and plain-weave fibre reinforcement forms10.1016/j.compstruct.2016.09.090 ↗
29. Virtual textile composites software: integration with micro-mechanical, permeability and structural analysis10.1016/j.compscitech.2005.05.031 ↗
30. Sherburn · 2007
31. Modelling and simulating textile structures using TexGen10.4028/www.scientific.net/AMR.331.44 ↗
32. A comparative study of twill weave reinforced composites under tension–tension fatigue loading: experiments and meso-modelling10.1016/j.compstruct.2015.09.005 ↗
33. Finite element modeling of 3D orthogonal woven C/C composite based on micro-computed tomography experiment10.1007/s10443-013-9353-4 ↗
34. Standard A. Standard test method for tensile properties of polymer matrix composite materials. ASTM D3039/D M 2008;3039.
35. Measurement of true stress-strain curves and evolution of plastic zone of low carbon steel under uniaxial tension using digital image correlation10.1016/j.optlaseng.2014.06.013 ↗
36. Full-field strain measurement using a two-dimensional Savitzky-Golay digital differentiator in digital image correlation10.1117/1.2714926 ↗
37. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
38. Void formation in composite prepregs – effect of dissolved moisture10.1016/j.compscitech.2010.09.009 ↗
39. Marrey · 1996
40. Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension10.1016/j.compstruct.2008.07.016 ↗
41. Mechanics of composite materials: past, present, and future10.1520/CTR10143J ↗
42. Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites10.1016/j.compositesb.2012.12.004 ↗