journal article·2016-02

Simulation of the long-term hydrostatic tests on Glass Fiber Reinforced Plastic pipes

Roham Rafiee, Behzad Mazhari

Publisher page

Abstract

Abstract The main objective of this paper is to simulate long-term hydrostatic tests on Glass Fiber Reinforced Plastic (GFRP) pipes. An experimental procedure for obtaining pressure class of GFRP pipes on the basis of long-term behavior is very time consuming and costly that sometimes take about 2 years for collecting required data. Then, obtained results are extrapolated to 50 years. In this work, a theoretical modeling procedure is developed to obtain residual strength of pipes after 50 years taking into account creep phenomenon. Developed progressive modeling consists of creep modeling, stress analysis and failure evaluation. An integrated modeling procedure is developed reporting time-to-failure at any desired internal pressure. As a case study and also validation purpose, the developed modeling procedure is conducted for predicting long-term behavior of a specific GFRP pipe subjected to internal pressure. A comparison between real experimental data and theoretical modeling is presented. A very good agreement between predicted 50-year hydrostatic pressure and experimental data implies on the proficiency of the developed modeling. Since the developed modeling is just in need of short-term experimental data on pure resin, it could be used as an appropriate engineering tool for industrial centers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A review of the present and future utilisation of FRP composites in the civil infra structure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
2. AWWA manual M45. Fiberglass pipe design. 2nd ed. Denver: American Water Works Association; 2005.
3. ANSI/AWWA C950-01. Standard for fiberglass pressure pipe. Denver: American Water Works Association; 2001.
4. ASTM D2992-06. Standard method for obtaining hydrostatic or pressure design basis for reinforced thermosetting resin pipe and fitting. American Society for Testing and Materials; 2006.
5. Tensile failure of filament-wound pipes under long-term creep loading: a probabilistic analysis10.1016/S0266-3538(97)00056-0 ↗
6. Effect of aqueous environment on the long-term behavior of glass fiber-reinforced plastic pipes10.1016/S0142-9418(03)00075-8 ↗
7. Determination of the long-term hydrostatic strength of multilayer pipes10.1016/j.polymertesting.2005.07.001 ↗
8. Two new criteria for the service life prediction of plastics pipes10.1016/j.polymertesting.2004.04.010 ↗
9. Strain corrosion of glass fibre-reinforced plastics pipes10.1016/j.polymertesting.2003.12.003 ↗
10. Equivalence of moisture and temperature in accelerated test method and its application in prediction of long-term properties of glass-fiber reinforced epoxy pipe specimen10.1016/j.polymertesting.2005.11.010 ↗
11. Creep and fatigue lifetime prediction of polymer matrix composites based on simple cumulative damage laws10.1016/j.compositesa.2008.07.014 ↗
12. Influence of moisture absorption on creep of GRP composite pipes10.1016/j.polymertesting.2007.02.007 ↗
13. Long-term behavior of GFRP pipes: reducing the prediction test duration10.1016/j.polymertesting.2009.12.008 ↗
14. Long term environmental effects on physical properties of vinylester composite pipes10.1016/j.polymertesting.2011.10.001 ↗
15. HDB test reports. Watani Composites Co., Kuwait; 2004. .
16. Continuous pipe design software, in-house software developed by technology owner. VEM S.P.A.; 2008. .
17. ASTM D1598-06. Standard test method for time to failure of plastic pipe under constant internal pressure. American Society for Testing and Materials; 2006.
18. Modeling creep in polymeric composites: developing a general integrated procedure10.1016/j.ijmecsci.2015.05.011 ↗
19. ASTM D2990-01. Standard test methods for tensile, compressive, and flexural creep and creep-rupture of plastics. American Society for Testing and Materials; 2001.
20. Hiel C, Cardon AH, Brinson HF. The nonlinear viscoelastic response of resin matrix composite laminates. Report No. NASA CR-3772; 1984.10.1007/978-94-009-6640-6_20 ↗
21. Jones · 1998
22. Average stress in matrix and average elastic energy of materials with misfitting inclusions
23. Boltzmann Ebewele · 2000
24. An energy criterion to predict delayed failure of multi-directional polymer matrix composites based on a non-linear viscoelastic model10.1016/j.compositesa.2003.12.002 ↗
25. Mathematical analysis of energies for viscoelastic materials and energy based failure criteria for creep loading10.1023/B:MTDM.0000027684.54929.67 ↗
26. A thermodynamic theory of the strength of the materials
27. Modeling and experimental evaluation of functional failure pressures in glass fiber reinforced polyester pipes10.1016/j.commatsci.2014.03.036 ↗