journal article·2019-01

The response of laminated composite plates and profiles under low-velocity impact load

A. Gliszczynski, T. Kubiak, P. Rozylo, P. Jakubczak, J. Bieniaś

Publisher page

Abstract

Abstract The effect of impact load with low velocity in thin-walled plates and profiles has been investigated. The paper deals with the relation between damage propagation , size and shape as a function of boundary conditions, layer arrangements and impact energy. The structures under consideration were made of eight-layer Glass Fiber Reinforced Polymer (GFRP) laminate with a quasi-isotropic, quasi-orthotropic and angle ply arrangement of layers. The standardised plates predefined to CAI tests and channel section profiles have been subjected to impact load. Based on the performed tests, the impact characteristics have been obtained and compared with the theoretical model (one degree of freedom mass-spring system). Further, despite it not being mentioned in the ASTM 7136 standard, characteristic curves were identified. It was noted that the impacts introducing matrix damages and the partial fracture of the fibres significantly change the course of the Force-Time histories, particularly after the maximum impact force is reached.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Standard Tests for Toughened Resin Composites, NASA Reference Publication 1092, ACEE Composites Project Office, Langley Research Center (Hampton, Va.), 1982.
2. Advanced Composite Compression Tests, Boeing Specification Support Standard BSS 7260, Rev. C, The Boeing Co. (Seattle, Wash.), 1988.
3. Silberschmidt · 2016
4. ASTM · 2012
5. Barely visible impact damage in scaled composite laminates: Experiments and numerical simulations10.1016/j.ijimpeng.2017.06.008 ↗
6. Effects of ply clustering in laminated composite plates under low-velocity impact loading10.1016/j.compscitech.2010.12.018 ↗
7. Damage and wave propagation characteristics in thin GFRP panels subjected to impact by steel balls at relatively low-velocities10.1016/j.ijimpeng.2017.08.007 ↗
8. Geometrical effects in the low velocity impact response of GFRP10.1016/j.compscitech.2006.10.015 ↗
9. A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates10.1016/j.compositesa.2015.11.041 ↗
10. Investigation of the response to low velocity impact and quasi-static indentation loading of particle-toughened carbon-fibre composite materials10.1016/j.compositesa.2015.03.016 ↗
11. Influence of internally dropped-off plies on the impact damage of asymmetrically tapered laminated CFRP10.1016/j.compositesa.2014.09.024 ↗
12. Impact resistance and damage characteristics of composite laminates10.1016/S0263-8223(03)00114-4 ↗
13. Low-velocity impact tests on carbon/epoxy composite laminates: a benchmark study10.1016/j.compositesb.2016.09.057 ↗
14. Numerical and experimental investigations of S-Glass/Polyester composite laminate plate under low energy impact10.1016/j.compositesb.2015.11.021 ↗
15. ASTM · 2015
16. The transverse impact responses of 3-D braided composite I-beam10.1016/j.compositesa.2016.11.033 ↗
17. Detecting barely visible impact damage detection on aircraft composites structures10.1016/j.compstruct.2009.04.014 ↗
18. Progressive failure analysis of thin-walled composite columns subjected to uniaxial compression10.1016/j.compstruct.2016.10.029 ↗
19. Numerical and experimental investigations of the low velocity impact in GFRP plates10.1016/j.compositesb.2017.11.039 ↗
20. Delamination threshold loads for low velocity impact on composite laminates10.1016/S1359-835X(00)00061-0 ↗
21. Improvement of low-velocity impact and compression-after-impact performance by z-fibre pinning10.1016/j.compscitech.2006.02.029 ↗
22. Impact damage prediction in carbon composite structures10.1016/0734-743X(94)00039-Y ↗
23. Davies GAO, Robinson P. Predicting failure by debonding/delamination. In: Debonding/Delamination of Composites. AGARD Conference Proceedings 530, Neuilly sur Seine: AGARD; 1992. 5.1-5.28.
24. Analysis of the end-notched flexure test configuration applicability for mechanically coupled fiber reinforced composite laminates10.1016/j.compstruct.2016.12.051 ↗
25. ASTM · 2014
26. Load-carrying capacity of thin-walled composite beams subjected to pure bending10.1016/j.tws.2017.02.009 ↗
27. Failure of GFRP channel section beams subjected to bending – Numerical and experimental investigations10.1016/j.compositesb.2016.11.057 ↗
28. Effect of resin and fibre properties on impact and compression after impact performance of CFRP10.1016/S1359-835X(01)00141-5 ↗
29. A model of low-velocity impact damage of composite plates subjected to compression-After-Impact (CAI) testing10.1016/j.compstruct.2017.08.097 ↗
30. Effect of low-velocity impact damage location on the stability and post-critical state of composite columns under compression10.1016/j.compstruct.2017.09.089 ↗
31. ASTM · 1987
32. ASTM · 1994
33. ASTM · 2000
34. ASTM · 2001