journal article·2018-04

Modelling fracture and delamination in composite laminates: Energy release rate and interface stress

J.L. Curiel-Sosa, B. Tafazzolimoghaddam, Chao Zhang

Publisher page

Abstract

This article presents an approach for modelling fracture and delamination, based on the partition of finite elements and on the energy release rate due to crack propagation in cross-ply laminates. The energy release rate is implemented within an Extended Finite Element Method (XFEM) framework. This approach is enabling the prediction of delamination propagation without pre-allocating damage zones. No element deletion techniques were used either. Mesh refinement was not needed for the propagation of cracks. Virtual testing of transverse cracks – eventually triggering delamination in cross-ply laminates – is presented to show the technique efficiency. Thus, a maximum energy release rate of 0.9kJ/m 2 is found for a transverse crack within [0 0 ,90 0 ] s laminate. When maximum energy release rate is reached, delamination in the {0 0 /90 0 } interface is triggered. Furthermore, delamination in a composite double cantilever beam is simulated and presented in some detail. The results were compared with experimental outputs and/or by other numerical means showing an excellent correlation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Recent developments on damage modeling and finite element analysis for composite laminates: a review10.1016/j.matdes.2010.03.031 ↗
2. Modelling of mixed damage on fibre reinforced composite laminates subjected to low velocity impact10.1177/1056789512446820 ↗
3. A constitutive model for anisotropic damage in fiber-composites10.1016/0167-6636(94)00053-0 ↗
4. A blended continuum damage and fracture mechanics method for progressive damage analysis of composite structures using XFEM10.1016/j.compstruct.2017.10.007 ↗
5. Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness10.1016/j.compstruct.2017.10.017 ↗
6. Mesh-independent matrix cracking and delamination modeling in laminated composites10.1002/nme.3195 ↗
7. XFEM simulation of delamination in composite laminates10.1016/j.compositesa.2015.10.007 ↗
8. Transversal crack and delamination of laminates using XFEM10.1016/j.compstruct.2017.04.011 ↗
9. Mixed-mode damage into a cgrp cruciform subjected to biaxial loading10.1016/j.compstruct.2015.08.038 ↗
10. A damage model for the simulation of delamination in advanced composites under variable-mode loading10.1016/j.mechmat.2005.10.003 ↗
11. Progressive delamination simulation of laminated plates based on a solid-shell interface element with damage-node model10.1016/j.proeng.2012.01.1031 ↗
12. Modelling the interaction between matrix cracks and delamination damage in scaled quasi-isotropic specimens10.1016/j.compscitech.2007.05.038 ↗
13. Recent efforts toward modeling interactions of matrix cracks and delaminations: an integrated XFEM-CE approach10.1080/09243046.2014.915092 ↗
14. Crack propagation in a chopped glass-reinforced composite under biaxial testing by means of XFEM10.1016/j.compstruct.2014.08.030 ↗
15. Numerical computation of the crack development and SIF in composite materials with XFEM and SFEM10.1016/j.compstruct.2016.10.067 ↗
16. Xfem-based model for simulating zigzag delamination growth in laminated composites under mode I loading10.1016/j.compstruct.2016.11.006 ↗
17. A finite element method for the simulation of strong and weak discontinuities in solid mechanics10.1016/j.cma.2003.12.041 ↗
18. Mesh-independent modeling of both distributed and discrete matrix cracking in interaction with delamination in composites10.1016/j.engfracmech.2009.11.010 ↗
19. Integrated XFEM-CE analysis of delamination migration in multi-directional composite laminates10.1016/j.compositesa.2016.07.007 ↗
20. Belytschko · 2013
21. What triggers a microcrack in printed engineering parts produced by selective laser sintering on the first place?10.1016/j.matdes.2015.09.026 ↗
22. Arbitray discontinuities in finite elements10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-M ↗
23. Delamination modelling of glare using the extended finite element method10.1016/j.compscitech.2012.02.005 ↗
24. 3-d local mesh refinement XFEM with variable-node hexahedron elements for extraction of stress intensity factors of straight and curved planar cracks10.1016/j.cma.2016.10.011 ↗
25. Non-planar 3d crack growth by the extended finite element and level sets – part i: mechanical model10.1002/nme.429 ↗
26. Fronts propagating with curvature dependent speed: algorithms based on Hamilton-Jacobi formulations10.1016/0021-9991(88)90002-2 ↗
27. Khoei · 2015
28. Characterization and evolution of matrix and interface related damage in [0/90]s laminates under tension. part i: Numerical predictions10.1016/j.compscitech.2010.03.004 ↗
29. Virtual crack closure technique: history, approach and applications10.1115/1.1595677 ↗
30. L.N., M., Barroso, A. Characterization and evolution of matrix and interface related damage in [0/90]s laminates under tension. part II: Experimental evidence10.1016/j.compscitech.2010.03.006 ↗
31. Predicting transverse crack formation in cross-ply laminates10.1016/S0266-3538(96)00142-X ↗
32. Stress intensity factors in two bonded elastic layers containing cracks perpendicular to and on the interface – ii. solution and results10.1016/0013-7944(83)90046-2 ↗
33. Airoldi A, Vesco M, van der Zwaag S, Baldi, A, Sala G. Damage in glare laminates under indentation loads: experimental and numerical results. In: Proceedings of the 17th International Conference on Composite Materials; vol. 29:D5:10; 2009.