journal article·2021-06

Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process

Xinyu Hui, Yingjie Xu, Jun Wang, Weihong Zhang

Publisher page

Abstract

Abstract Cure-induced residual stresses have a great impact on the mechanical behavior of carbon fiber reinforced polymer (CFRP) composites. This paper develops an integrated analytical framework to study the effect of the cure-induced residual stresses on the mechanical behavior of unidirectional IM7/8552 composites. During the curing process, evolution of the material properties of the resin matrix is captured using the cure hardening instantaneous linear elastic (CHILE) model. In addition to the mechanical strain, thermal and chemical shrinkage strains of the resin are taken into account in the determination of the residual stresses. By introduction of the predicted residual stresses into the representative volume element (RVE), the quasi-static and dynamic compression analyses are performed to demonstrate the local viscoplastic deformation of the matrix and the homogenized stress–strain response of the composites. Simulation results are in good agreement with the experimental data. The comparative analysis indicates that the cure-induced residual stresses lead to an earlier nonlinearity and lower compressive strength . Furthermore, to investigate the effect of the fiber distribution on the residual stresses and compressive response of the composites, a parametric analysis is performed, in which two parameters are considered, i.e., minimal inter-fiber distance and fiber volume fraction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Thin-ply composite laminates: a review10.1016/j.compstruct.2020.111920 ↗
2. Residual stress measurement of fiber metal laminates using incremental hole-drilling technique in consideration of the integral method10.1016/j.ijmecsci.2016.05.025 ↗
3. Characterisation of residual stresses in a single fibre composite with fbg sensor10.1016/j.compscitech.2006.10.024 ↗
4. An analysis of residual thermal stresses in a unidirectional graphite/pmr-15 composite based on x-ray diffraction measurements10.1016/S0266-3538(01)00060-4 ↗
5. Prediction of process-induced residual stresses in thermoplastic composites10.1177/002199839002400603 ↗
6. Characterization of residual stresses in a thin-walled filament wound carbon/epoxy ring using incremental hole drilling method10.1016/j.compscitech.2014.01.008 ↗
7. Two-step method to evaluate equibiaxial residual stress of metal surface based on micro-indentation tests10.1016/j.matdes.2011.02.044 ↗
8. Measurement and analysis of residual stresses in single fiber composite10.1016/j.matdes.2009.09.027 ↗
9. A comparison of curing process-induced residual stresses and cure shrinkage in micro-scale composite structures with different constitutive laws10.1007/s10443-017-9608-6 ↗
10. A micromechanical study of stress concentrations in composites10.1016/j.compositesb.2017.09.009 ↗
11. Evolution of curing residual stresses in composite using multi-scale method10.1016/j.compositesb.2018.08.012 ↗
12. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: microscopic mechanisms and modeling10.1016/j.compscitech.2007.02.001 ↗
13. Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects10.1016/j.compositesa.2016.06.018 ↗
14. Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions10.1016/j.compscitech.2017.03.014 ↗
15. A micro-mechanical model of reinforced polymer failure with length scale effects and predictive capabilities. validation on carbon fiber reinforced high-crosslinked RTM6 epoxy resin10.1016/j.mechmat.2019.02.017 ↗
16. A large strain hyperelastic viscoelastic-viscoplastic-damage constitutive model based on a multi-mechanism non-local damage continuum for amorphous glassy polymers10.1016/j.ijsolstr.2016.06.008 ↗
17. DMello RJ, Maiarù M, Waas AM. Effect of the curing process on the transverse tensile strength of fiber-reinforced polymer matrix lamina using micromechanics computations, Integr Mater Manuf Innovat 2015;4(1):7. doi:10.1186/s40192-015-0035-y.10.1186/s40192-015-0035-y ↗
18. Characterization of intralaminar strengths of virtually cured polymer matrix composites10.1016/j.compositesb.2018.02.018 ↗
19. A numerical micro-mechanical study on damage induced by the curing process in carbon/epoxy unidirectional material10.1016/j.compstruct.2018.11.059 ↗
20. Thermomechanical modeling of amorphous glassy polymer undergoing large viscoplastic deformation: 3-points bending and gas-blow forming10.3390/polym11040654 ↗
21. A plane strain model for process-induced deformation of laminated composite structures10.1106/YXEA-5MH9-76J5-BACK ↗
22. Digital image correlation measurement of resin chemical and thermal shrinkage after gelation10.1007/s10853-015-9072-3 ↗
23. Decoupled two-scale viscoelastic analysis of frp in consideration of dependence of resin properties on degree of cure10.1016/j.ijsolstr.2019.11.010 ↗
24. Characterization and modeling the thermo-mechanical cure-dependent properties of epoxy molding compound10.1016/j.ijadhadh.2011.10.007 ↗
25. Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method10.1016/j.eurpolymj.2013.07.013 ↗
26. High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites10.1016/j.compstruct.2015.08.047 ↗
27. Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part ii - micromechanical analyses10.1016/j.ijsolstr.2013.02.007 ↗
28. A thermomechanically coupled finite deformation constitutive model for shape memory alloys based on Hencky strain
29. Effects of triangle-shape fiber on the transverse mechanical properties of unidirectional carbon fiber reinforced plastics10.1016/j.compstruct.2016.05.065 ↗
30. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling10.1016/j.compscitech.2007.02.001 ↗
31. Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy10.1016/j.compstruct.2018.10.076 ↗
32. Carbon fibre pullout under the influence of residual thermal stresses in polymer matrix composites10.1016/j.commatsci.2012.05.019 ↗
33. A micromechanically based model for strain rate effects in unidirectional composites10.1016/j.mechmat.2020.103491 ↗
34. Johnston AA. An integrated model of the development of process-induced deformation in autoclave processing of composite structures. Ph.D. thesis, University of British Columbia; 1997.
35. Mechanical properties and details of composite laminates for the test cases used in the third world-wide failure exercise10.1177/0021998313499477 ↗
36. Verification of the capability for quantitative stress prediction during epoxy cure10.1016/S0032-3861(97)00077-3 ↗
37. Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite10.1016/j.compositesa.2009.11.008 ↗
38. Finite-strain elasto-viscoplastic behavior of an epoxy resin: experiments and modeling in the glassy regime10.1016/j.ijplas.2014.07.002 ↗
39. Input data for test cases used in benchmarking triaxial failure theories of composites10.1177/0021998312449886 ↗
40. Characterization and modeling of polymeric matrix under multi-axial static and dynamic loading10.1016/j.compscitech.2014.07.025 ↗
41. Micro-mechanical analysis of the effect of ply thickness on the transverse compressive strength of polymer composites10.1016/j.compositesa.2015.09.015 ↗
42. On the prediction of the bi-axial failure envelope of a ud cfrp composite lamina using computational micromechanics: effect of microscale parameters on macroscale stressstrain behavior10.1016/j.compstruct.2020.112605 ↗
43. In situ measurements of through-the-thickness strains during processing of as4/8552 composite10.1016/j.compositesa.2007.07.018 ↗
44. Experimental characterization and constitutive modeling of the non-linear stress–strain behavior of unidirectional carbon–epoxy under high strain rate loading10.1186/s40323-018-0111-x ↗
45. Effects of inter-fiber spacing and thermal residual stress on transverse failure of fiber-reinforced polymermatrix composites10.1016/j.commatsci.2012.09.027 ↗