Lamb wave propagation in anisotropic multilayered piezoelectric laminates made of PVDF-θ° with initial stresses
Source abstract
Abstract
Abstract In this paper, the influence of an initial stresses on the Lamb waves propagation in an anisotropic multilayered piezoelectric laminates is investigated. Formulations are given for only open circuit surface; while the Legendre polynomial method is employed for calculate the wave propagating characteristics. To validate our numerical strategy, this polynomial approach was applied to simulate lamina composite structures. Relatively good results were obtained compared to reliable data available from the literature ones, with relatively significant computation effort. Convergence of the present method is discussed. Influence of initial stresses and fiber orientation angle on the behaviors of Lamb waves is analyzed. Results confirm that the behavior of Lamb modes depends not only on the initial stress but also on fiber orientation. Next, the dispersion curves of fundamental Lamb modes in sandwich plates with 0°/θ°/0 configuration are calculated. Finally, the optimal angles in PVDF-θ° with initial stresses for which the Lamb modes exist are also analyzed. These results for the composite structures may render as a useful reference for the design of ultrasonic transducers in industry for non-destructive testing especially that encounters initial stresses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Acoustic Wave Resonator Technologies · Acoustic Wave Phenomena Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Nondestructive evaluation of hidden multi-delamination in a glass-fiber-reinforced plastic composite using terahertz spectroscopy10.1016/j.compstruct.2015.09.055 ↗
2. Effect of corrosive solutions on composites laminates subjected to low velocity impact loading10.1016/j.compstruct.2013.09.032 ↗
3. Vibro-acoustic behaviour of shear deformable laminated composite flat panel using BEM and the higher order shear deformation theory10.1016/j.compstruct.2017.08.012 ↗
4. Fatigue behavior of short carbon fiber reinforced epoxy composites10.1016/j.compositesb.2018.11.035 ↗
5. A weighted sparse reconstruction-based ultrasonic guided wave anomaly imaging method for composite laminates10.1016/j.compstruct.2018.10.097 ↗
6. Rayleigh JWS, On waves propagated along the place surfaces of an elastic solid. In: Proceedings of the London mathematical society, London; 1885.10.1112/plms/s1-17.1.4 ↗
7. Lamb H, On waves in elastic plate. In: Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences 93; 1917. p. 114–128.10.1098/rspa.1917.0008 ↗
8. Viktorov · 1967
9. Reverberation-ray-matrix analysis of free vibration of piezoelectric laminates10.1016/j.jsv.2009.05.008 ↗
10. On free wave propagation in anisotropic layered media10.1007/s10338-008-0860-z ↗
11. Exact solution of angle-ply piezoelectric laminates in cylindrical bending with interfacial imperfections10.1016/j.compstruct.2003.11.008 ↗
12. Layerwise mixed models for analysis of multilayered piezoelectric composite plates using least-squares formulation10.1016/j.compstruct.2014.08.031 ↗
13. Influences of anisotropic fiber-reinforced composite media properties on fundamental guided wave mode behavior: a Legendre polynomial approach10.1016/j.ast.2018.04.041 ↗
14. Bulk wave propagation in layered piezomagnetic/piezoelectric plates with initial stresses or interface imperfections10.1016/j.compstruct.2012.04.006 ↗
15. Propagation of Lamb waves in a pre-stressed plate10.4028/www.scientific.net/AMM.66-68.413 ↗
16. Effects of initial stress on guided waves in orthotropic functionally graded plates10.1016/j.apm.2013.06.029 ↗
17. The effect of applied stress on the phase and group velocity of guided waves in anistropic plates10.1121/1.5016969 ↗
18. Effects of initial stresses on guided wave propagation in multilayered PZT-4/PZT-5A composites: a polynomial expansion approach
19. Surface wave propagation in functionally graded piezoelectric material: an analytical solution10.1177/1045389X17708047 ↗
20. Transmission of elastic waves through a stratified solid medium10.1063/1.1699629 ↗
21. Nayfeh · 1995
22. A matrix method for elastic wave problems10.1785/BSSA0540010431 ↗
23. Analytic model for Rayleigh wave propagation in piezoelectric layer overlaid orthotropic substratum10.1007/s00707-016-1708-0 ↗
24. Liouville-green approximation: an analytical approach to study the elastic waves vibrations in composite structure of piezo material10.1016/j.compstruct.2017.10.031 ↗
25. Love waves in functionally graded piezoelectric material (FGPM) sandwiched between initially stressed layer and elastic substrate10.1080/17455030.2015.1063738 ↗
26. Surface acoustic waves propagation in epitaxial ZnO/alpha-Al2O3 thin film10.3813/AAA.918507 ↗
27. Ghozlen, Investigation of guided waves propagation in orthotropic viscoelastic carbon-epoxy plate by Legendre polynomial method10.1016/j.mechrescom.2016.03.007 ↗
28. Study of the influence of semiconductor material parameters on acoustic wave propagation modes in GaSb/AlSb bi-layered structures by Legendre polynomial method10.1016/j.physb.2016.05.030 ↗
29. Theoretical study on the dispersion curves of Lamb waves in piezoelectric semiconductor sandwich plates GaAs-FGPM-AlAs: Legendre polynomial series expansion10.1016/j.spmi.2017.03.036 ↗
30. Numerical simulation of Lamb waves propagation in a functionally graded piezoelectric plate composed of GaAs-AlAs materials using Legendre polynomial approach10.1016/j.ijleo.2017.05.099 ↗
31. Modeling of phase velocity and frequency spectrum of guided Lamb waves in piezoelectric-semiconductor multilayered structures made of AlAs and GaAs10.1016/j.spmi.2017.06.052 ↗
32. Investigating and modeling of effect of piezoelectric material parameters on shear horizontal (SH) waves propagation in PZT-5H, PMN-0.33PT and PMN-0.29PT plates10.1016/j.ijleo.2017.08.140 ↗
33. Legendre polynomial modeling for vibrations of guided Lamb waves modes in [001]c, [011]c and [111]c polarized (1–x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 (x=0.29 and 0.33) piezoelectric plates: Physical phenomenon of multiple intertwining of An and Sn modes10.1140/epjp/i2017-11788-9 ↗
34. Conceptual advantages and limitations of the Laguerre polynomial approach to analyze surface acoustic waves in semi-infinite substrates and multilayered structures10.1063/1.369699 ↗
35. Auld · 1990
36. Derivation and experimental validation of Lamb wave equations for an n-layered anisotropic composite laminate10.1016/j.compstruct.2014.01.034 ↗
37. Effects of composite lamina proprieties on fundamental Lamb wave modes dispersion characteristics10.1016/j.compstruct.2015.01.017 ↗
38. Sottos NR, Berfield T, Ong R, Payne DA, Residual stress effects on ferroelectric thin film patterning, properties and performance. In: XXI ICTAM, Poland; 2004.10.1557/PROC-784-C3.2 ↗
39. Love wave propagation in layered magneto-electro-elastic structures10.1007/s11433-008-0058-x ↗
40. Finite element analysis of piezoelectric elastic waveguides10.1109/T-SU.1973.29772 ↗