journal article·2020-04

Damage resistance and low-velocity impact behaviour of hybrid composite laminates with multiple thin steel and elastomer layers

Denise Düring, E. Petersen, D. Stefaniak, C. Hühne

Publisher page

Abstract

Abstract In the presented investigation composites consisting of carbon and glass fiber reinforced plastics in combination with steel and elastomer layers are subjected to experimental drop-weight impact tests and compression after impact tests. The objective is to study the low-velocity impact behaviour, damage resistance and residual strength of composite laminates dependent on position and proportion of additional layers. In continuation of earlier studies two additional laminate configurations containing thin steel layers and two elastomer layers are tested. Impact damage and damage tolerance are determined respecting the aspect of differing bending stiffnesses and structure densities. It is found that concerning the elastomer addition the damage area, which mainly depends on the elastomer layer position, is an essential influencing factor on the residual strength. The steel addition leads to wide delaminations but high residual strengths.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Composite Structure Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. The impact resistance of composite materials - a review10.1016/0010-4361(91)90549-V ↗
2. Review of low-velocity impact properties of composite materials10.1016/1359-835X(96)00074-7 ↗
3. Abrate · 1998
4. Fibre composite strengthening of thin steel passenger vehicle roof structures10.1016/j.tws.2013.09.018 ↗
5. Drop-weight impact damage tolerance of CFRP with rubber-modified epoxy matrix10.1016/0010-4361(93)90018-4 ↗
6. Effects of liquid rubber modification on the behaviour of epoxy resin10.1016/S0014-3057(01)00158-6 ↗
7. Effect of glass fiber hybridization on the behavior under impact of woven carbon fiber/epoxy laminates10.1177/0021998310369602 ↗
8. Studies on the low-velocity impact response of woven hybrid composites10.1016/j.compstruct.2004.07.024 ↗
9. Low velocity impact response of fibre-metal laminates – a review10.1016/j.compstruct.2013.08.003 ↗
10. Impact resistance of fiber-metal laminates: a review10.1016/j.ijimpeng.2012.05.006 ↗
11. Impact failure characteristics in sandwich structures10.1016/S0020-7683(02)00245-7 ↗
12. Low-velocity impact behavior of fiber metal laminates10.1177/0021998310376108 ↗
13. Impact properties of fibre metal laminates10.1016/0961-9526(93)90001-Z ↗
14. Damage characterization of titanium/GFRP hybrid laminates subjected to low-velocity impact10.1016/j.compositesa.2011.03.005 ↗
15. Development of fibre-metal laminates for improved impact performance10.1140/epjst/e2012-01589-y ↗
16. Alderliesten · 2017
17. Impact resistance and damage of fiber metal laminates
18. Impact properties of novel corrosion resistant hybrid structures10.1016/j.compstruct.2013.10.023 ↗
19. Ageing of corrosion resistant steel/rubber/composite hybrid structures10.1016/j.ijadhadh.2013.12.008 ↗
20. Experimental evaluation of the low-velocity impact damage resistance of CFRP tubes with integrated rubber layer10.1016/j.compstruct.2015.11.069 ↗
21. Low-velocity impact response of composite laminates with steel and elastomer protective layer10.1016/j.compstruct.2015.08.001 ↗
22. Influence of the elastomer layer position on the low-velocity impact behavior of composite/steel/elastomer laminates
23. Compressive failure of composites, part i: Testing and micromechanical theories10.1016/0376-0421(94)00002-3 ↗
24. Properties and characterization of fiber metal laminates
25. Improving the mechanical performance of unidirectional CFRP by metal-hybridization
26. Improving impact endangered CFRP structures by metal-hybridisation
27. Stefaniak · 2017
28. MTM44-1 – PDS1189_07.12_Issue8. 2012. Umeco.
29. ASTM D 7136/D 7136M-12. Standard test method for measuring the damage resistance of a fiber-reinforcedpolymer matrix composite to a drop-weight impact event. Standard, ASTM International, West Conshohocken (PA, USA); 2012.
30. The effects of thermally induced residual stress on the fatigue behaviour of fibre metal laminates
31. Post impact analysis of damaged variable-stiffness curved composite plates10.1016/j.compstruct.2017.01.018 ↗
32. Investigation of curing effects on distortion of fibre metal laminates10.1016/j.compstruct.2014.12.019 ↗
33. Abaqus theory guide 2016. Tech. Rep., Dassault Systèmes; 2015.
34. Riegert G, Keilig T, Aoki R, Drechsler K, Busse G. Schädigungscharakterisierung an NCF-Laminaten mittels Lockin-Thermographie und Bestimmung der CAI-Restfestigkeiten. In: Tagungsband des 19. Stuttgarter Kunststoff-Kolloquiums. Stuttgart, Germany; 2005.
35. 2007
36. Damage evolution in GLARE fibre-metal laminate under repeated low-velocity impact tests10.2478/s13531-012-0019-z ↗