journal article·2021-04

Nonlinear lay-up optimization of variable stiffness composite skew and taper cylindrical panels in free vibration

Touraj Farsadi, Mohammad Rahmanian, Hasan Kurtaran

Publisher page

Abstract

Abstract In the present study, the fundamental natural frequencies of curvilinear fiber composite skew and taper cylindrical panels are optimized applying genetic algorithm (GA). Later, the fundamental amplitude-dependent nonlinear frequency behavior of the optimized curved fiber layup configurations is studied and compared with the reference unidirectional fiber layup. The variable stiffness behavior is obtained by altering the fiber angles continuously according to the curvilinear fiber path function in the composite laminates. A nonlinear structural model is utilized based on the virtual work principle. Green’s nonlinear kinematic strain relations are used to account for the geometric nonlinearities and the first-order shear deformation theory (FSDT) is adopted to generalize the formulation for the case of moderately thick cylindrical panels including transverse shear deformations. The goal is to determine how the variable stiffness parameters affect the linear and nonlinear free vibration behavior of the skew and taper cylindrical panels. Consequently, one may find the optimum fiber path with improved structural characteristics for the cylindrical panel. Eight-layered composite skew and taper cylindrical panels at two different boundary condition sets are considered in this research. Generalized Differential Quadrature (GDQ) method of solution is employed to solve the nonlinear governing equations of motion. Numerical results demonstrate the degree of effectiveness for fiber angle paths, boundary conditions, and geometrical non-uniformities on the fundamental frequencies of the cylindrical panel. Eventually, optimum fiber angles of each layer in free vibration analysis are presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Vibration and Dynamic Analysis · Composite Structure Analysis and Optimization · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Design of variable stiffness composite panels for maximum fundamental frequency using lamination parameters10.1016/j.compstruct.2006.08.018 ↗
2. Geometrically nonlinear vibration analysis of thin, rectangular plates using the hierarchical finite element method—I: the fundamental mode of isotropic plates10.1016/S0045-7949(96)00345-8 ↗
3. Nonlinear vibration of metal foam cylindrical shells reinforced with graphene platelets10.1016/j.ast.2018.12.022 ↗
4. Hydroelastic dynamic analysis of axially moving plates in continuous hot-dip galvanizing process10.1016/j.ijmecsci.2016.03.010 ↗
5. Frequency optimization of laminated skew plates10.1016/j.matdes.2008.11.007 ↗
6. Buckling of laminated composite cylindrical skew panels10.1177/0892705715618741 ↗
7. Large amplitude free flexural vibrations of laminated composite skew plates10.1016/j.ijnonlinmec.2004.04.003 ↗
8. Non-linear free periodic vibrations of open cylindrical shallow shells10.1016/j.jsv.2007.11.029 ↗
9. Buckling and free vibration study of variable and constant-stiffness cylindrical shells10.1016/j.compstruct.2018.11.061 ↗
10. Maximizing the fundamental frequency of laminated cylindrical panels using layerwise optimization10.1016/j.ijmecsci.2006.06.008 ↗
11. Lamination parameter interpolation method for design of manufacturable variable-stiffness composite panels10.2514/1.J057902 ↗
12. AW., B., Structural performance of fiber-placed, variable-stiffness composite conical and cylindrical shells. PhD Thesis, Faculty of Aerospace Engineering, Delft University of Technology, Delft: The Netherlands; 2010.
13. Optimization of a composite cylinder under bending by tailoring stiffness properties in circumferential direction10.1016/j.compositesb.2009.10.004 ↗
14. Design of variable-stiffness conical shells for maximum fundamental eigenfrequency10.1016/j.compstruc.2007.04.020 ↗
15. Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-II10.1016/j.compositesb.2012.07.056 ↗
16. Higher-order theories for the free vibrations of doubly-curved laminated panels with curvilinear reinforcing fibers by means of a local version of the GDQ method10.1016/j.compositesb.2015.07.012 ↗
17. Prestressed vibration of stiffened variable-angle tow laminated plates10.2514/1.J057719 ↗
18. Differential quadrature solution for the free vibration analysis of laminated conical shells with variable stiffness10.1016/S0020-7403(01)00010-8 ↗
19. Curved fiber paths optimization of a composite cylindrical shell via Kriging-based approach10.1177/0021998314568168 ↗
20. An integrated framework of exact modeling, isogeometric analysis and optimization for variable-stiffness composite panels10.1016/j.cma.2018.04.046 ↗
21. Optimal stacking sequence of laminated anisotropic cylindrical panel using genetic algorithm10.12989/sem.2007.25.6.637 ↗
22. Optimal lay-up design of variable stiffness laminated composite plates by a layer-wise optimization technique10.1080/0305215X.2017.1307978 ↗
23. Buckling optimization of variable stiffness cylindrical shells through artificial intelligence techniques10.1016/j.compstruct.2019.111513 ↗
24. Global optimization of laminated cylindrical panels based on fundamental natural frequency10.1016/j.compstruct.2012.04.005 ↗
25. Non-linear modes of vibration of thin cylindrical shells in composite laminates with curvilinear fibres10.1016/j.compstruct.2014.11.019 ↗
26. Maximization of fundamental frequency of laminated composite cylindrical shells by ant colony algorithm10.5028/jatm.v5i1.233 ↗
27. Stacking sequence optimization of composite plates for maximum fundamental frequency using particle swarm optimization algorithm10.1007/s11012-011-9482-5 ↗
28. PSO algorithm for fundamental frequency optimization of fiber metal laminated panels10.12989/sem.2013.47.5.713 ↗
29. Fundamental frequency optimization of variable stiffness composite skew plates
30. Nonlinear flutter response of a composite plate applying curvilinear fiber paths10.1007/s00707-019-02564-y ↗
31. In-plane response of laminates with spatially varying fiber orientations-variable stiffness concept10.2514/3.11613 ↗
32. Waldhart C. Analysis of tow-placed, variable-stiffness laminates. Blacksburg; 1996.10.2514/6.1996-1569 ↗
33. Optimal locations of piezoelectric actuators and sensors for supersonic flutter control of composite laminated panels10.1177/1077546313480538 ↗
34. Non-linear vibrations of variable stiffness composite laminated plates10.1016/j.compstruct.2012.03.025 ↗
35. Vibration of thin skew fibre reinforced composite laminates10.1006/jsvi.1996.0745 ↗
36. Benamar · 1990
37. Nayfeh AH, Mook DT. Nonlinear Oscillations. Wiley; 2008.
38. Geometrically nonlinear free vibration analysis of laminated composite plates: A finite element assessment of a higher order non-polynomial shear deformation theory
39. Free vibration analysis of skewed open circular cylindrical shells10.1016/j.jsv.2005.05.010 ↗
40. Vibration of functionally graded CNTs-reinforced skewed cylindrical panels using a transformed differential quadrature method10.1007/s00707-017-1846-z ↗
41. Nonlinear analysis of functionally graded skewed and tapered wing-like plates including porosities: A bifurcation study10.1016/j.tws.2020.107341 ↗