journal article·2020-04

A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures

Steffen Tinkloh, Tao Wu, Thomas Tröster, Thomas Niendorf

Publisher page

Abstract

Abstract Automotive lightweight design is a considerable measure to meet the worldwide need for reducing CO2 emissions. However, the lightweight potential of common materials like high strength steels or aluminium is limited. Hybrid materials allow to combine metals and CFRP in a manner to offset the drawbacks of every single material and reach an optimum of mechanical properties (Wang et al., 2016). Nonetheless, an essential shortcoming of hybrids are thermally induced residual stresses after cooling down from moulding temperature, driven by varying coefficients of thermal expansion and chemical shrinkage of the FRP. For a reliable prediction of the residual stress evolution in hybrid-structures during curing and after cooling down, a numerical homogenization technique of representative unit cells is proposed to calculate effective cure-dependent properties. Starting from a heterogeneous microstructure, a thermo-chemical-mechanical constitutive model for the curing process of the epoxy resin is presented and applied to two representative volume elements (RVE). The transition between the micro- and macro-scale is done by using a numerical homogenization framework. The effective cure-dependent properties predicted by the homogenization are used to simulate the curing-process and analyses the residual stresses of a metal-CFRP plate. The results are compared with experimental data obtained by the incremental hole drilling measurement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Wang Z, Lauter C, Sanitther B, Camberg A. Manufacturing and investigation of steel-cfrp hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology 2;2016:229.10.1504/IJAUTOC.2016.084322 ↗
2. Wang Z, Riemer M, Koch S-F, Barfuss D, Grtzner R, Augenthaler F, Schwennen J. Intrinsic hybrid composites for lightweight structures: tooling technologies.
3. On the development of an intrinsic hybrid composite
4. Intrinsic hybrid composites for lightweight structures: new process chain approaches10.4028/www.scientific.net/AMR.1140.239 ↗
5. Residual stresses in thermoplastic compositesa study of the literaturepart i: Formation of residual stresses10.1016/j.compositesa.2005.12.025 ↗
6. Thermoset characterization for moldability analysis10.1002/pen.760140312 ↗
7. Residual stresses in polymer matrix composite laminates10.1177/002199837601000401 ↗
8. Cure-dependent thermomechanical modelling of the stress relaxation behaviour of composite materials during manufacturing10.1177/0021998316656924 ↗
9. Three-dimensional chemo-thermomechanically coupled simulation of curing adhesives including viscoplasticity and chemical shrinkage10.1007/s00466-011-0663-9 ↗
10. A three-scale framework for fibre-reinforced-polymer curing part ii: mesoscopic modeling and macroscopic effective properties10.1016/j.ijsolstr.2016.09.005 ↗
11. Process modeling of composite materials: residual stress development during cure. Part i. Model formulation10.1177/002199839202601604 ↗
12. Process-induced stress and deformation in thick-section thermoset composite laminates10.1177/002199839202600502 ↗
13. Johnston AA. An integrated model of the development of process-induced deformation in autoclave processing of composite structures [Ph.D. thesis]; 1997. URL:https://open.library.ubc.ca/collections/ubctheses/831/items/1.0088805.
14. Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites10.1016/j.compositesa.2009.09.025 ↗
15. Autoclave cure simulation of composite structures applying implicit and explicit fe techniques10.1007/s10999-012-9205-7 ↗
16. Generation of heat and stress during the cure of polymers used in fiber composites10.1016/j.ijengsci.2011.12.004 ↗
17. The role of curing stresses in subsequent response, damage and failure of textile polymer composites10.1016/j.jmps.2012.12.005 ↗
18. Modelling and computation of curing and damage of thermosets10.1016/j.commatsci.2011.09.013 ↗
19. A small-strain model to simulate the curing of thermosets10.1007/s00466-008-0344-5 ↗
20. Viscoelastic properties of an epoxy resin during cure10.1177/a037323 ↗
21. Effect of the curing process on the transverse tensile strength of fiber-reinforced polymer matrix lamina using micromechanics computations10.1186/s40192-015-0035-y ↗
22. A three-scale framework for fibre-reinforced-polymer curing part i: microscopic modeling and mesoscopic effective properties10.1016/j.ijsolstr.2016.09.003 ↗
23. Lauter C. Entwicklung und herstellung von hybridbauteilen aus metallen und faserverbundkunststoffen fr den leichtbau im automobil [Ph.D. thesis]. Univerität Paderborn; 2014.
24. Prediction of cure induced warpage of micro-electronic products10.1016/j.microrel.2010.02.028 ↗
25. Residual stresses in microelectronics induced by thermoset packaging materials during cure10.1016/j.microrel.2004.05.001 ↗
26. Calculation of stresses in crosslinking polymers10.1177/002199839603000102 ↗
27. Wenzel M. Spannungsbildung und relaxationsverhalten bei der aushärtung von epoxidharzen [Ph.D. thesis]. Technische Universität: Darmstadt; 2005. URL:http://tuprints.ulb.tu-darmstadt.de/558/.
28. On the simulation of panel distortions due to hot curing adhesives10.1016/j.ijsolstr.2014.03.016 ↗
29. t Hof V. Mechanical characterization and modeling of curing thermosets [Ph.D. thesis]; 2005.
30. In-situ measurement of chemical shrinkage of my750 epoxy resin by a novel gravimetric method10.1016/S0266-3538(03)00199-4 ↗
31. A fem coupling model for properties prediction during the curing of an epoxy matrix10.1016/j.commatsci.2008.11.007 ↗
32. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
33. Theory of mechanical properties of fibre-strengthened materials: I. Elastic behaviour10.1016/0022-5096(64)90019-5 ↗
34. Theory of mechanical properties of fibre-strengthened materials: Ii. Inelastic behaviour10.1016/0022-5096(64)90020-1 ↗
35. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
36. Theory of mechanical properties of fibre-strengthened materialsiii. Self-consistent model10.1016/0022-5096(65)90008-6 ↗
37. A simple computational homogenization method for structures made of linear heterogeneous viscoelastic materials10.1016/j.cma.2011.06.012 ↗
38. Numerical prediction of temperature-dependent anisotropic viscoelastic properties of fiber reinforced composite10.1177/0731684417727064 ↗
39. Stress analysis of viscoelastic composite materials10.1177/002199836700100302 ↗
40. Micromechanical formulas for the relaxation tensor of linear viscoelastic composites with transversely isotropic fibers10.1016/0020-7683(94)00233-M ↗
41. Haasemann G, Ulbricht V. Numerical evaluation of the viscoelastic and viscoplastic behavior of composites; 2010.
42. Microlevel manufacturing process simulation of carbon fiber/epoxy composites to analyze the effect of chemical and thermal induced residual stresses10.1177/0021998311430157 ↗