Groove adhesion test for electrodeposited chromium
Source abstract
Abstract
A quantitative test has been devised to evaluate the adhesion of electrodeposited chromium on steel substrates. The test involves the cutting of parallel grooves across a plated surface using a small metal shaper equipped with a carbide tool. The grooves are cut at a depth just below the interface and shearing stresses are generated which can produce failure of the coating. In general, varying amounts of residual chromium are left on the surface of the lands depending on the relative cohesive and adhesive bond strengths of the electrodeposited chromium. Energy dispersive x‐ray analysis is used to map the distribution of residual chromium and obtain an intensity count. The ratio of count intensity normalized against a reference of 100% chromium coverage provides a quantitative measurement of adhesion. The groove adhesion test was found to be equally applicable for the evaluation of both hard chromium and soft chromium deposits.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.