High‐vacuum degassing furnace made from aluminum alloy and its thermal characteristics
Source abstract
Abstract
For aluminum alloys the emissivity is about 10 times smaller, and the thermal conductivity is 12 times higher than for stainless steel. A high‐vacuum degassing furnace made from aluminum alloy has advantages such as (i) providing uniform high temperature of the heating plate, (ii) needing no cooling for the vacuum chamber, and (iii) low power requirement. These characteristics were confirmed by a series of tests on a high‐vacuum degassing furnace made from aluminum alloy 6061‐T6, 640 mm wide, 640 mm high, 750 mm long, and 30 mm thick. The results were as follows: (a) At 450 °C, the temperature on the heating plate in the furnace was uniform to 13 °C, compared to a spread of 45 °C at 300 °C in the stainless‐steel furnace. (b) At 450 °C the outer wall of the aluminum vacuum chamber reached only 90 °C without any additional cooling. (c) The heater required only 1.3 kW, compared to 5.5 kW in the stainless‐steel furnace.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Radiative Heat Transfer Studies · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.