journal article·2021-02

Influence of hydration on the mechanical, structural, thermal, and morphological properties of cement filled epoxy composites

A. Daniel, M. R. Islam, M. G. Sumdani, A. Firouzi

Publisher page

Abstract

Abstract Different loading of Portland cement (PC) (10, 20, 30, and 40 wt%) was used to produce epoxy‐based polymer concrete. The optimum loading was used to prepare another sample using hydration in presence of air circulation. The polymer concretes were characterized in terms of mechanical, thermal, structural and morphological properties. The properties showed increasing trends after cement addition. Results showed that the tensile strength of the polymer concretes were improved by 37.2%, 115.5%, 165.9%, and 40.6% for loading of 10, 20, 30, and 40 wt% cement, respectively. In addition, the flexural strength of the polymer concretes was also enhanced and found maximum (175.3% higher) in 30 wt% concrete compared to neat epoxy. Other mechanical properties of the polymer concrete were also found increasing. Moreover, decomposition temperature was raised nearly 15°C for adding 30 wt% cement which was the maximum among the other polymer concretes. For the case of hydration in presence of air circulation, the prepared composite showed the highest tensile mechanical performance with improved surface topography. From the results, it was concluded that the addition of cement into the epoxy was very effective to produce polymer concretes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Section of Chemical Engineering Technology, Malaysian Institute of Chemical and Bioengineering Technology Universiti Kuala Lumpur Melaka Malaysia

Section of Instrumentation and Control Engineering, Malaysian Institute of Industrial Technology Universiti Kuala Lumpur Pasir Gudang Malaysia

Department of Biomedical Engineering University of Houston Houston TX USA

References (35)

Show source-provided references
1. 10.1002/adv.2192910.1002/adv.21929 ↗
2. 10.1016/j.conbuildmat.2019.11752910.1016/j.conbuildmat.2019.117529 ↗
3. 10.1002/vnl.2168010.1002/vnl.21680 ↗
4. 10.1002/vnl.2171210.1002/vnl.21712 ↗
5. 10.1002/app.2100810.1002/app.21008 ↗
6. 10.1002/app.3902510.1002/app.39025 ↗
7. 10.1002/vnl.2163010.1002/vnl.21630 ↗
8. 10.1002/vnl.2163710.1002/vnl.21637 ↗
9. 10.1002/suco.20170000310.1002/suco.201700003 ↗
10. 10.1002/app.1992.07044091910.1002/app.1992.070440919 ↗
11. 10.1002/vnl.2163310.1002/vnl.21633 ↗
12. 10.1002/vnl.2165010.1002/vnl.21650 ↗
13. Bhikshma V. · Asian J. Civ. Eng. (Build. Hous.) · 2010 · 11 · 563
14. 10.1016/S0950-0618(02)00027-210.1016/S0950-0618(02)00027-2 ↗
15. 10.1080/02533839.2005.967098110.1080/02533839.2005.9670981 ↗
16. Wedatalla A. M. O. · Adv. Civ. Eng. · 201910.1155/2019/1683292 ↗
17. 10.1016/j.conbuildmat.2011.01.01010.1016/j.conbuildmat.2011.01.010 ↗
18. 10.1016/j.rinp.2012.09.00110.1016/j.rinp.2012.09.001 ↗
19. 10.1533/9780857093080.31510.1533/9780857093080.315 ↗
20. 10.1155/2013/94874510.1155/2013/948745 ↗
21. N. F.Ariffin M. W.Hussin A. R. M.Sam S. L.Han M. A.Ismail. Effect on compressive strength of epoxy‐modified mortar with further dry‐curing in9th Asia Pacific Structural Engineering and Construction Conf. & 8th ASEAN Civil Engineering Conf. (APSEC‐ACEC 2015) 3–5 Nov2015.
22. 10.1016/j.compositesa.2014.11.02210.1016/j.compositesa.2014.11.022 ↗
23. 10.4236/ojce.2018.8201610.4236/ojce.2018.82016 ↗
24. 10.4028/www.scientific.net/AMM.253-255.47810.4028/www.scientific.net/AMM.253-255.478 ↗
25. 10.1016/j.conbuildmat.2015.06.05610.1016/j.conbuildmat.2015.06.056 ↗
26. 10.1002/app.4688310.1002/app.46883 ↗
27. 10.1016/1065-7355(94)00031-X10.1016/1065-7355(94)00031-X ↗
28. 10.1016/S0032-3861(00)00392-X10.1016/S0032-3861(00)00392-X ↗
29. 10.1016/j.porgcoat.2014.06.02710.1016/j.porgcoat.2014.06.027 ↗
30. 10.1002/pen.2496610.1002/pen.24966 ↗
31. Jo Y. K. · Polym. Polym. Compos. · 2016 · 24 · 195
32. 10.1007/s00289-015-1450-010.1007/s00289-015-1450-0 ↗
33. 10.1016/j.polymertesting.2018.07.00810.1016/j.polymertesting.2018.07.008 ↗
34. Pramojaney N. · Drying · 1980 · 2 · 93
35. 10.1515/ace-2015-006810.1515/ace-2015-0068 ↗