Development of Composite Materials by 3D Printing Method From Filaments Based on Polylactide and Modified Oat Husk
Source abstract
Abstract
ABSTRACT The rapid development of additive technologies facilitates rapid response to manufacturing needs, leading to dynamic new safe and sustainable materials. Eco‐friendly, rapidly renewable resources, with reinforcing properties, have attracted particular attention for study. Due to the high SiO 2 content of plant wastes, the possibility of their chemical modification and their application as filler, the final composite material with filler can be characterized by high physical and mechanical properties. In this work, the possibility of printing a product on a 3D device by Fused Deposition Modeling (FDM) method from a filament consisting of a composite material based on a biodegradable thermoplastic polymer (polylactide) and a filler (modified oat husk) was studied. The surface properties of the filler before and after modification, as well as the change of functional groups and percentage of chemical content, were studied. The filament was produced using the technological method of extrusion. Filaments (filament) were tensile tested, and from the samples with the best performance, laboratory samples were printed on a 3D printer for further bending and strength tests. The result of the work is the printing on a 3D device of filament products consisting of a highly filled PLA‐based composite material and a chemically modified filler with high physical and mechanical properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Belgorod State Technological University Named After V. G. Shukhov Belgorod Russia
References (36)
Show source-provided references
1. 10.1016/j.mspro.2014.07.14610.1016/j.mspro.2014.07.146 ↗
2. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
3. 10.3390/solids303003410.3390/solids3030034 ↗
4. 10.3390/polym1107109410.3390/polym11071094 ↗
5. 10.1007/s40964‐021‐00232‐z10.1007/s40964‐021‐00232‐z ↗
6. 10.3390/polym1318310110.3390/polym13183101 ↗
7. 10.1016/j.apmt.2021.10107810.1016/j.apmt.2021.101078 ↗
8. 10.1007/s10570‐018‐1888‐y10.1007/s10570‐018‐1888‐y ↗
9. 10.1016/j.matpr.2020.02.45710.1016/j.matpr.2020.02.457 ↗
10. 10.1016/j.polymer.2014.07.05410.1016/j.polymer.2014.07.054 ↗
11. 10.1016/j.apmt.2018.03.00910.1016/j.apmt.2018.03.009 ↗
12. 10.1002/vnl.2188710.1002/vnl.21887 ↗
13. 10.1016/j.compositesb.2019.01.02510.1016/j.compositesb.2019.01.025 ↗
14. 10.1016/j.promfg.2019.06.08910.1016/j.promfg.2019.06.089 ↗
15. 10.3390/polym1309149910.3390/polym13091499 ↗
16. 10.1002/vnl.2209710.1002/vnl.22097 ↗
17. 10.1016/j.addma.2017.03.00510.1016/j.addma.2017.03.005 ↗
18. 10.1177/0731684421107060910.1177/07316844211070609 ↗
19. 10.1177/0731684425131497910.1177/07316844251314979 ↗
20. 10.1134/S199079312003023910.1134/S1990793120030239 ↗
21. 10.1134/S199542122370029610.1134/S1995421223700296 ↗
22. 10.1016/j.addr.2016.06.01210.1016/j.addr.2016.06.012 ↗
23. 10.3390/polym1413264610.3390/polym14132646 ↗
24. 10.1088/1402‐4896/ad723d10.1088/1402‐4896/ad723d ↗
25. 10.1016/j.indcrop.2021.11368510.1016/j.indcrop.2021.113685 ↗
26. 10.3390/chemengineering702003810.3390/chemengineering7020038 ↗
27. 10.3390/polym1403039210.3390/polym14030392 ↗
28. 10.1515/jmbm‐2020‐001510.1515/jmbm‐2020‐0015 ↗
29. 10.1177/073168441881889310.1177/0731684418818893 ↗
30. 10.1080/15440478.2020.173959310.1080/15440478.2020.1739593 ↗
31. 10.1002/vnl.2213810.1002/vnl.22138 ↗
32. 10.3390/ma1424763810.3390/ma14247638 ↗
33. 10.3390/polym1322403810.3390/polym13224038 ↗
34. 10.1088/1757‐899X/1107/1/01205710.1088/1757‐899X/1107/1/012057 ↗
35. 10.1016/j.ijbiomac.2020.01.29110.1016/j.ijbiomac.2020.01.291 ↗
36. 10.3390/polym1308128010.3390/polym13081280 ↗