journal article·2021-02

The effect of secondary nanofiller on mechanical properties and formulation optimization of HDPE /nanoclay/ nanoCaCO 3 hybrid nanocomposites using response surface methodology

Seyedemad Alavitabari, Mahboube Mohamadi, Azizeh Javadi, Hamid Garmabi

Publisher page

Abstract

Abstract Mechanical properties were evaluated in high‐density polyethylene (HDPE) containing plate‐like nanoclay (NC) and particulate nano calcium carbonate (nCaCO 3 ). A two‐step melt mixing method was utilized to prepare nanocomposites withNC/nCaCO 3 hybrid content varying from 7 to 15 wt%. Optimization of the morphological, rheological and mechanical characteristics was carried out via Response Surface Methodology by considering nanofiller loadings and compatibilizer (PE‐g‐MA) content as independent variables. The findings revealed that a nanocomposite composed of 9 wt% PE‐g‐MA, 3.5 wt%NC, and 10 wt%nCaCO 3 was optimal. This composition exhibited 50% enhancement in Young's modulus and 8% improvement in yield strength over neat HDPE. Despite the reduced impact strength in all of the prepared nanocomposites, the incorporation ofnCaCO 3 prevented a sudden decrease in the toughness caused by the nanoclay. Further, the fracture behavior observed by scanning electron microscopy (SEM) images suggested that nCaCO 3 activated new toughening mechanisms.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Polymer Engineering and Color Technology Amirkabir University of Technology Tehran Iran

Polymer Engineering Department, Faculty of Engineering Urmia University Urmia Iran

References (40)

Show source-provided references
1. 10.1002/1521-4095(200102)13:3<163::AID-ADMA163>3.0.CO;2-U10.1002/1521-4095(200102)13:3<163::AID-ADMA163>3.0.CO;2-U ↗
2. 10.1007/s10973-018-7140-z10.1007/s10973-018-7140-z ↗
3. 10.3390/polym1110155710.3390/polym11101557 ↗
4. 10.1002/vnl.2169610.1002/vnl.21696 ↗
5. 10.1016/j.progpolymsci.2017.04.00210.1016/j.progpolymsci.2017.04.002 ↗
6. 10.1016/j.compscitech.2019.04.00910.1016/j.compscitech.2019.04.009 ↗
7. 10.1002/adma.20190434810.1002/adma.201904348 ↗
8. 10.1016/j.jhazmat.2019.12130910.1016/j.jhazmat.2019.121309 ↗
9. 10.1007/s10765-019-2559-410.1007/s10765-019-2559-4 ↗
10. 10.1080/0022234050052229910.1080/00222340500522299 ↗
11. 10.1002/pen.2079210.1002/pen.20792 ↗
12. 10.1177/002199831562137110.1177/0021998315621371 ↗
13. 10.1021/ma000565f10.1021/ma000565f ↗
14. 10.1039/b902073j10.1039/b902073j ↗
15. 10.1016/j.engfracmech.2006.12.02310.1016/j.engfracmech.2006.12.023 ↗
16. 10.1177/002199831774647710.1177/0021998317746477 ↗
17. 10.1002/pen.1004010.1002/pen.10040 ↗
18. 10.1016/j.polymer.2004.11.11110.1016/j.polymer.2004.11.111 ↗
19. 10.1016/S0032-3861(98)00444-310.1016/S0032-3861(98)00444-3 ↗
20. 10.1016/j.msea.2006.12.06910.1016/j.msea.2006.12.069 ↗
21. 10.12693/APhysPolA.134.29710.12693/APhysPolA.134.297 ↗
22. 10.1016/S0032-3861(02)00769-310.1016/S0032-3861(02)00769-3 ↗
23. 10.1016/S0142-9418(03)00076-X10.1016/S0142-9418(03)00076-X ↗
24. 10.1016/j.msea.2006.11.05910.1016/j.msea.2006.11.059 ↗
25. 10.1002/vnl10.1002/vnl ↗
26. 10.1002/app10.1002/app ↗
27. 10.1002/vnl10.1002/vnl ↗
28. 10.1002/vnl.2174210.1002/vnl.21742 ↗
29. 10.1007/s12588-012-9038-010.1007/s12588-012-9038-0 ↗
30. 10.1016/j.compositesb.2019.10729710.1016/j.compositesb.2019.107297 ↗
31. 10.1002/adv.2190610.1002/adv.21906 ↗
32. 10.1016/j.polymertesting.2017.11.00610.1016/j.polymertesting.2017.11.006 ↗
33. 10.1016/j.carbpol.2018.04.08310.1016/j.carbpol.2018.04.083 ↗
34. 10.1007/s00289-014-1219-x10.1007/s00289-014-1219-x ↗
35. 10.1002/app.1361210.1002/app.13612 ↗
36. S.Alavitabari M.Mohamadi H.Garmabi A.Javadi Hybrid layered silicate/calcium carbonate reinforced high‐density polyethylene nanocomposites: systematic morphological evaluation through rheological properties and Response Surface Method Fibers and Polymers Accepted.
37. 10.1002/app10.1002/app ↗
38. 10.1007/s00289-012-0799-610.1007/s00289-012-0799-6 ↗
39. 10.1007/s12221-015-0129-310.1007/s12221-015-0129-3 ↗
40. 10.1016/j.polymer.2006.01.06310.1016/j.polymer.2006.01.063 ↗