journal article·2007-06

Hot pin welding of thin poly(vinyl chloride) sheet

James D. Van de Ven, Arthur G. Erdman

Publisher page

Abstract

Abstract This paper develops a method of welding two thin sheets of poly(vinyl chloride) (PVC) with a heated pin, thus allowing construction of a relationship between the weld temperature and weld strength. Constructing a relationship between weld strength and temperature is necessary for modeling many welding processes, including laser transmission welding. An experimental approach to establishing this relationship is required because of the complex melting behavior of PVC. The designed experimental device uses a single heated pin to weld samples by using varying pressure and temperature for one second dwell time. An electro‐mechanical loadframe pulled the welded samples until joint failure occurred, thereby allowing determination of the weld strength. An experiment varying welding pin temperature and joining pressure found the temperature to be a highly significant determiner of weld strength, while the pressure was found to be not significant. A transient numerical heat transfer model was used to calculate the weld interface temperature for each pin temperature. The relationship established in this paper can be used to predict the weld strength from the temperature output from models of alternative welding methods. J. VINYL ADDIT. TECHNOL., 13:110–115, 2007. © 2007 Society of Plastics Engineers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Photolithography Techniques · Polymer Science and PVC · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. 10.1002/pen.1095410.1002/pen.10954 ↗
2. Potente H. · Kunstst. Plast. Eur. · 2004 · 53
3. H.PotenteandG.Fiegler in ANTEC 2004 Chicago IL 1193 (2004).
4. 10.1117/12.47066210.1117/12.470662 ↗
5. Y.Kennigh H.R.Shercliff andG.C.McGrath in ANTEC 2002 San Francisco CA 1132 (2002).
6. Y.P.Huang A.Yu D.Watt andB.Baylis in ANTEC 2006 Charlotte NC 2310 (2006).
7. Matthews G. · 1996
8. Bachmann F.G. · Proc. SPIE‐Int. Soc. Opt. Eng. · 2002 · 4637 · 505
9. 10.1002/vnl.1024510.1002/vnl.10245 ↗
10. D.GrewellandA.Benatar in ANTEC 2006 Charlotte NC 2205 (2006).
11. D.Grewell in ANTEC 1999 New York 1411 (1999).
12. Potente H. · Welding World · 2001 · 45 · 5
13. 10.1163/156856193X0096110.1163/156856193X00961 ↗
14. Oehlert G.W. · 2000
15. Cengel Y.A. · 1998