Can Grafted Natural Rubber Compatibilizers Enhance Interfacial Compatibility and Performance of Dynamically Cured NR / EVA Thermoplastic Vulcanizates
Source abstract
Abstract
ABSTRACT This study explores the effects of grafted natural rubber (NR)‐based compatibilizers, namely, NR grafted with maleic anhydride (NR‐g‐MA), itaconic anhydride (NR‐g‐IA), and citraconic anhydride (NR‐g‐CA), on the performance of dynamically cured NR/ethylene‐vinyl acetate (EVA) blends. These graft copolymers were initially synthesized via a solution‐state free‐radical polymerization. Subsequently, each compatibilizer was incorporated at a fixed loading of 7 wt% into 40/60 NR/EVA blends. Among the three, NR‐g‐IA exhibited the most pronounced enhancement in properties, attributed to its high polarity and symmetric structure, which promoted strong interfacial interactions. That is, the blend compatibilized with NR‐g‐IA exhibited the highest tensile strength (11.0 MPa), elongation at break (692%), and Shore A hardness (73), along with the lowest oil swelling degree (33.08%). Additionally, scanning electron microscopy (SEM) analysis revealed that the NR ‐g‐ IA blend achieved the finest phase dispersion, with the smallest rubber domain size, while thermogravimetric analysis (TGA) indicated the highest degradation temperature. Furthermore, dynamic mechanical analysis showed a noticeable shift in T g and an increase in storage modulus, confirming enhanced network rigidity. Overall, the NR‐g‐IA system outperformed the other compatibilizers, establishing the following compatibilization efficiency hierarchy: NR‐g‐IA>NR‐g‐MA>NR‐g‐CA>uncompatibilized blend. The NR‐g‐IA compatibilized thermoplastic vulcanizates (TPVs) show potential for use in automotive parts, cable insulation, and flexible, weather‐resistant products.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Science and Technology Prince of Songkla University Pattani Thailand
Faculty of Science and Industrial Technology Prince of Songkla University Surat Thani Thailand
Funding
Prince of Songkla University
References (49)
Show source-provided references
1. 10.1016/j.progpolymsci.2017.11.00310.1016/j.progpolymsci.2017.11.003 ↗
2. 10.1021/acsomega.1c0606210.1021/acsomega.1c06062 ↗
3. 10.1002/app.5294210.1002/app.52942 ↗
4. 10.1016/j.polymertesting.2011.08.01310.1016/j.polymertesting.2011.08.013 ↗
5. 10.3139/217.381710.3139/217.3817 ↗
6. 10.1039/C6RA24891H10.1039/C6RA24891H ↗
7. 10.1177/089270571876155710.1177/0892705718761557 ↗
8. 10.3144/expresspolymlett.2008.7210.3144/expresspolymlett.2008.72 ↗
9. 10.1002/pi.580310.1002/pi.5803 ↗
10. 10.1002/pen.2366510.1002/pen.23665 ↗
11. 10.1177/1477760624123906710.1177/14777606241239067 ↗
12. 10.1002/app.3786110.1002/app.37861 ↗
13. 10.1002/app.3555810.1002/app.35558 ↗
14. Development on Mechanical Properties of PMMA by Blending It With Natural Rubber or Silicone Rubber and Reinforced by Nanoparticle
15. 10.1002/app.3975010.1002/app.39750 ↗
16. 10.1016/j.proeng.2013.12.20410.1016/j.proeng.2013.12.204 ↗
17. 10.1177/09673911100180030310.1177/096739111001800303 ↗
18. 10.1016/j.polymertesting.2006.03.01110.1016/j.polymertesting.2006.03.011 ↗
19. 10.1016/S0079‐6700(97)00052‐X10.1016/S0079‐6700(97)00052‐X ↗
20. 10.1016/j.polymertesting.2005.09.00710.1016/j.polymertesting.2005.09.007 ↗
21. 10.3390/polym1413274010.3390/polym14132740 ↗
22. 10.1021/acsmacrolett.5b0076310.1021/acsmacrolett.5b00763 ↗
23. 10.3390/polym1311167710.3390/polym13111677 ↗
24. 10.1007/s10924‐022‐02582‐310.1007/s10924‐022‐02582‐3 ↗
25. 10.1002/app.2080810.1002/app.20808 ↗
26. 10.1002/masy.20220007710.1002/masy.202200077 ↗
27. 10.1002/adv.2024310.1002/adv.20243 ↗
28. 10.1016/0032‐3861(96)00016‐X10.1016/0032‐3861(96)00016‐X ↗
29. 10.1016/j.matdes.2020.10913410.1016/j.matdes.2020.109134 ↗
30. 10.1016/j.eurpolymj.2018.08.00710.1016/j.eurpolymj.2018.08.007 ↗
31. 10.1007/s10965‐019‐1878‐210.1007/s10965‐019‐1878‐2 ↗
32. 10.1177/0892705724124469710.1177/08927057241244697 ↗
33. 10.1016/j.polymertesting.2005.11.00610.1016/j.polymertesting.2005.11.006 ↗
34. 10.1016/j.polymdegradstab.2006.04.01010.1016/j.polymdegradstab.2006.04.010 ↗
35. 10.1016/0141‐3910(95)00238‐310.1016/0141‐3910(95)00238‐3 ↗
36. 10.1002/pat.143010.1002/pat.1430 ↗
37. 10.1515/epoly.2012.12.1.4710.1515/epoly.2012.12.1.47 ↗
38. 10.1002/vnl.2153310.1002/vnl.21533 ↗
39. 10.1002/masy.20190013610.1002/masy.201900136 ↗
40. 10.1177/009524431141344110.1177/0095244311413441 ↗
41. 10.21203/rs.3.rs‐5748638/v110.21203/rs.3.rs‐5748638/v1 ↗
42. 10.1088/1757‐899X/548/1/01201410.1088/1757‐899X/548/1/012014 ↗
43. 10.4028/www.scientific.net/AMM.754‐755.9410.4028/www.scientific.net/AMM.754‐755.94 ↗
44. 10.15376/biores.9.3.5488-550010.15376/biores.9.3.5488-5500 ↗
45. 10.1007/s10118‐013‐1310‐z10.1007/s10118‐013‐1310‐z ↗
46. 10.1177/0731684421105174910.1177/07316844211051749 ↗
47. 10.1515/ipp‐2024‐011010.1515/ipp‐2024‐0110 ↗
48. 10.1016/j.mtcomm.2024.10942010.1016/j.mtcomm.2024.109420 ↗
49. 10.1016/j.polymertesting.2008.03.00410.1016/j.polymertesting.2008.03.004 ↗