Dynamically vulcanized polypropylene/ethylene‐propylene diene monomer/organoclay nanocomposites: Effect of mixing sequence on structural, rheological, and mechanical properties
Source abstract
Abstract
Dynamically vulcanized thermoplastic elastomer (TPE) nanocomposites based on polypropylene (PP), ethylene‐propylene diene monomer (EPDM) and cloisite 15A were prepared via direct melt mixing in a co‐rotating twin‐screw extruder. The mixing process was carried out with optimized processing parameters (barrel temperature = 180°C; screw speed = 150 rpm; and feeding rate = 0.2 kg/hr). The formulation used to prepare the nanocomposites was fixed to 75/20/5 (PP/EPDM/Cloisite © 15A), expressed in mass fraction. Effect of mixing sequence on the properties of vulcanized and unvulcanized (TPE) nanocomposites prepared under similar conditions was investigated using X‐ray diffraction (XRD) and a tensile testing machine. Results showed that the sequence of mixing does affect the properties of final TPE nanocomposites. Accordingly, nanocomposite samples prepared through mixing the preblended PP/clay masterbatch with EPDM phase, show better clay dispersion within the polymer matrix. J. VINYL ADDIT. TECHNOL., 22:320–325, 2016. © 2014 Society of Plastics Engineers
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer composites and self-healing · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Iran Polymer and Petrochemical Institute P.O. Box 14965/115 Tehran Iran
Polymer Science and Technology Division Research Institute of Petroleum Industry P.O. Box 14115‐143 Tehran Iran
References (23)
Show source-provided references
1. Ivan G. · Iran. J. Polym. Sci. Technol. · 1991 · 2 · 3
2. Sinha Ray S. · Polym. Sci. · 2003 · 28 · 1539
3. 10.1177/073168440809685010.1177/0731684408096850 ↗
4. 10.1002/pen.2155310.1002/pen.21553 ↗
5. 10.3144/expresspolymlett.2009.8510.3144/expresspolymlett.2009.85 ↗
6. 10.1177/009524430910053110.1177/0095244309100531 ↗
7. 10.3139/217.101710.3139/217.1017 ↗
8. Cui Z. · Polym. Sci. · 2010 · 28 · 563
9. 10.1016/j.matchemphys.2008.08.06910.1016/j.matchemphys.2008.08.069 ↗
10. 10.1002/pc.2049510.1002/pc.20495 ↗
11. 10.5254/RCT.13.8799610.5254/RCT.13.87996 ↗
12. Eslami‐Farsani R. · Adv. Compos. Mater. · 2014 · 11 · 63
13. Khosrokhavar R. · Iran. Polym. J. · 2011 · 20 · 41
14. 10.3139/217.244510.3139/217.2445 ↗
15. 10.1002/polb.1035510.1002/polb.10355 ↗
16. 10.1016/S0032-3861(02)00013-710.1016/S0032-3861(02)00013-7 ↗
17. 10.1016/S0032-3861(01)00473-610.1016/S0032-3861(01)00473-6 ↗
18. 10.1016/j.polymer.2005.02.01810.1016/j.polymer.2005.02.018 ↗
19. 10.1002/pen.2067310.1002/pen.20673 ↗
20. Dolgovskij M.K. · SPE‐ANTEC Tech. · 2003
21. 10.1002/pen.2045810.1002/pen.20458 ↗
22. 10.1016/j.polymer.2004.12.04410.1016/j.polymer.2004.12.044 ↗
23. 10.1002/polb.2016010.1002/polb.20160 ↗