Development of novel ecofriendly sodium alginate‐gelrite gellan gum composite films: Effects of glycerol and sorbitol
Source abstract
Abstract
Abstract The current study investigated the impact of various concentrations of plasticizers, especially glycerol and sorbitol, on the physical and chemical characteristics, as well as the antioxidant capabilities, of films made from sodium alginate and gelrite gellan gum. The elongation at break and thickness of the film samples increased, while water vapor permeability, opacity, and tensile strength of the film samples decreased with the increase in concentration of plasticizers. Film samples became more transparent and glossier in nature with increasing concentrations of plasticizers. Scanning electron microscopy revealed that sorbitol‐loaded films showed a smooth and homogenous structure as compared to glycerol‐loaded film samples. The control film samples showed significantly higher antioxidant activity compared to the other film samples. Contact angle measurements demonstrated that the film samples became more hydrophilic with the addition of plasticizers. This study provides an overview of the role of plasticizers, including glycerol and sorbitol, in the fabrication and application of biopolymeric films for food packaging. Highlights Plasticizers increased EAB and thickness but decreased WVP, opacity, and TS. Films with higher plasticizer levels were more transparent and thinner. Sorbitol‐loaded films were more homogenous than glycerol‐loaded ones. Control films had higher antioxidant activity than plasticizer‐added films. Increase in plasticizer level increased hydrophilicity of films
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanocomposite Films for Food Packaging · Polysaccharides Composition and Applications · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Natural and Medical Sciences Research Center University of Nizwa Birkat Al Mauz Nizwa Oman
School of Health Science University of Petroleum and Energy Studies Dehradun India
Department of Chemistry M.S. Ramaiah Institute of Technology Bengaluru India
School of Pharmacy University of Nizwa Nizwa Oman
Department of Food Engineering, Faculty of Engineering Adana Alparslan Turkes Science and Technology University Adana Turkey
References (55)
Show source-provided references
1. 10.1016/j.focha.2024.10071110.1016/j.focha.2024.100711 ↗
2. 10.3390/polym1412244210.3390/polym14122442 ↗
3. 10.4103/0019-5278.9319810.4103/0019-5278.93198 ↗
4. 10.1016/j.wasman.2018.04.02310.1016/j.wasman.2018.04.023 ↗
5. 10.1016/j.enmm.2021.10060810.1016/j.enmm.2021.100608 ↗
6. 10.3390/foods710017010.3390/foods7100170 ↗
7. 10.1016/j.compositesb.2017.06.02310.1016/j.compositesb.2017.06.023 ↗
8. 10.3390/coatings808029110.3390/coatings8080291 ↗
9. 10.1515/polyeng-2013-014610.1515/polyeng-2013-0146 ↗
10. 10.1016/j.ijpharm.2018.05.04610.1016/j.ijpharm.2018.05.046 ↗
11. 10.1016/j.ijbiomac.2019.11.15510.1016/j.ijbiomac.2019.11.155 ↗
12. 10.1016/j.ijbiomac.2019.06.07910.1016/j.ijbiomac.2019.06.079 ↗
13. 10.1016/j.carbpol.2020.11741010.1016/j.carbpol.2020.117410 ↗
14. 10.1016/j.eurpolymj.2010.12.01110.1016/j.eurpolymj.2010.12.011 ↗
15. 10.1002/adv.2208710.1002/adv.22087 ↗
16. 10.3390/molecules2818663710.3390/molecules28186637 ↗
17. 10.1016/j.ijbiomac.2019.05.15810.1016/j.ijbiomac.2019.05.158 ↗
18. 10.1016/j.polymertesting.2019.10593510.1016/j.polymertesting.2019.105935 ↗
19. 10.1016/j.ijbiomac.2020.08.00110.1016/j.ijbiomac.2020.08.001 ↗
20. 10.1016/j.eurpolymj.2022.11137710.1016/j.eurpolymj.2022.111377 ↗
21. 10.1016/j.ijbiomac.2023.12491410.1016/j.ijbiomac.2023.124914 ↗
22. 10.1007/s13197-020-04361-110.1007/s13197-020-04361-1 ↗
23. Mechanical properties of tapioca starch‐based film incorporated with bulk chitosan and chitosan nanoparticle: a comparative study. Pertanika
24. 10.1038/s41598-021-93094-y10.1038/s41598-021-93094-y ↗
25. 10.1016/j.fpsl.2020.10055610.1016/j.fpsl.2020.100556 ↗
26. 10.1016/j.foodhyd.2018.10.03810.1016/j.foodhyd.2018.10.038 ↗
27. 10.1016/j.fpsl.2023.10109010.1016/j.fpsl.2023.101090 ↗
28. 10.3390/gels903023310.3390/gels9030233 ↗
29. 10.1007/s12161-022-02343-x10.1007/s12161-022-02343-x ↗
30. 10.1111/j.1365-2621.1999.tb09880.x10.1111/j.1365-2621.1999.tb09880.x ↗
31. 10.1016/S0023-6438(95)80008-510.1016/S0023-6438(95)80008-5 ↗
32. 10.1016/S0891-5849(98)00315-310.1016/S0891-5849(98)00315-3 ↗
33. 10.1016/j.foodhyd.2019.10542810.1016/j.foodhyd.2019.105428 ↗
34. 10.1002/star.20150036610.1002/star.201500366 ↗
35. 10.1016/j.nfs.2020.06.00210.1016/j.nfs.2020.06.002 ↗
36. 10.1002/pts.253610.1002/pts.2536 ↗
37. 10.1016/j.foodhyd.2014.05.02810.1016/j.foodhyd.2014.05.028 ↗
38. 10.3390/polym1319335610.3390/polym13193356 ↗
39. 10.1016/j.foodhyd.2015.01.03210.1016/j.foodhyd.2015.01.032 ↗
40. Maruddin F · 2020 · 012043
41. 10.1016/j.fpsl.2021.10068710.1016/j.fpsl.2021.100687 ↗
42. 10.1007/s11947-021-02585-310.1007/s11947-021-02585-3 ↗
43. 10.1016/j.fochx.2022.10030010.1016/j.fochx.2022.100300 ↗
44. 10.1016/j.polymertesting.2018.07.00310.1016/j.polymertesting.2018.07.003 ↗
45. 10.1016/B978-0-12-818134-8.00003-110.1016/B978-0-12-818134-8.00003-1 ↗
46. 10.1002/fsn3.313410.1002/fsn3.3134 ↗
47. 10.1016/j.foodhyd.2017.10.02810.1016/j.foodhyd.2017.10.028 ↗
48. 10.3390/polym1302024210.3390/polym13020242 ↗
49. 10.1039/C8PY00319J10.1039/C8PY00319J ↗
50. 10.1016/j.carbpol.2007.03.01710.1016/j.carbpol.2007.03.017 ↗
51. 10.1016/j.jclepro.2017.12.06410.1016/j.jclepro.2017.12.064 ↗
52. 10.3390/polym1321371910.3390/polym13213719 ↗
53. 10.3390/foods1008179710.3390/foods10081797 ↗
54. 10.1186/s40538-023-00504-610.1186/s40538-023-00504-6 ↗
55. 10.1002/app.3295610.1002/app.32956 ↗