journal article·2020-08

Fabrication of Damping Material over Broad Temperature Range: Blending Amorphous Styrene‐Butadiene‐Styrene Triblock Copolymer with Semi‐Crystalline Syndiotactic 1,2‐Polybutadiene

Haoxuan Sun, Zepeng Mao, Jun Zhang

Publisher page

Abstract

Broad‐temperature‐range (−85.4 to 96.2 °C) damping material was fabricated by blending amorphous styrene‐butadiene‐styrene triblock copolymer (SBS) with semicrystalline syndiotactic 1,2‐polybutadiene (s‐PB). According to dynamic mechanical thermal analysis (DMTA) analysis, SBS/s‐PB blends exhibited three consecutive damping peaks at −85.4, 2.7, and 96.2 °C. The peaks at −85.4 and 96.2 °C were associated with the glass transition of polybutadiene and polystyrene in SBS, and peak at 2.7 °C belonged to the glass transition of s‐PB. The analysis of rheological behavior and thermal properties showed that the mobility and thermal stability of SBS/s‐PB blends improved with the introduction of semi‐crystalline s‐PB. Moreover, regarding the results of DMTA, Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM) measurements, SBS and s‐PB were compatible in the macroscopic scale while they were immiscible in thermodynamic scale. Wide‐angle X‐ray diffraction (WAXD) results present the crystal structure of blends were unchanged. Besides, with the introduction of s‐PB in blends, 100% tensile modulus increased from 3.2 to 5.8 MPa and tear strength increased from 49.2 to 84.2 kN/m. The Kerner–Uemura–Takayanagi model was employed to compare with experimental data. Thus, broad‐temperature‐range damping material was fabricated by blending SBS with s‐PB and the material combined with good processability, thermal stability, and mechanical properties. J. VINYL ADDIT. TECHNOL., 26:336–347, 2020. © 2019 Society of Plastics Engineers
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering Nanjing Tech University Nanjing 210009 People's Republic of China

Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites Nanjing 210009 People's Republic of China

Funding

Priority Academic Program Development of Jiangsu Higher Education Institutions

References (37)

Show source-provided references
1. 10.1039/C8RA00266E10.1039/C8RA00266E ↗
2. 10.1016/j.matchar.2017.07.03710.1016/j.matchar.2017.07.037 ↗
3. 10.1007/s13726-016-0439-310.1007/s13726-016-0439-3 ↗
4. 10.1016/S1471-3918(01)80184-210.1016/S1471-3918(01)80184-2 ↗
5. 10.1002/vnl.2136110.1002/vnl.21361 ↗
6. Lv X.S. · Appl. Sci‐Basel · 2017 · 7 · 1
7. 10.1016/j.compscitech.2010.03.01410.1016/j.compscitech.2010.03.014 ↗
8. 10.1016/j.polymertesting.2018.05.03710.1016/j.polymertesting.2018.05.037 ↗
9. Yang Y. · J. Appl. Polym. Sci. · 2015 · 132 · 4260510.1002/app.42605 ↗
10. 10.1002/app.4630010.1002/app.46300 ↗
11. 10.1016/j.polymertesting.2018.11.00810.1016/j.polymertesting.2018.11.008 ↗
12. 10.1080/03602559.2016.121169710.1080/03602559.2016.1211697 ↗
13. 10.1016/j.polymdegradstab.2005.01.03710.1016/j.polymdegradstab.2005.01.037 ↗
14. 10.1016/j.polymertesting.2015.02.00210.1016/j.polymertesting.2015.02.002 ↗
15. 10.1021/ma049753m10.1021/ma049753m ↗
16. 10.1002/vnl.2147410.1002/vnl.21474 ↗
17. 10.1016/j.polymertesting.2018.07.01910.1016/j.polymertesting.2018.07.019 ↗
18. 10.1080/19475411.2015.113139910.1080/19475411.2015.1131399 ↗
19. 10.1002/app.2126310.1002/app.21263 ↗
20. 10.1016/S0014-3057(99)00270-010.1016/S0014-3057(99)00270-0 ↗
21. 10.1002/pen.76029090410.1002/pen.760290904 ↗
22. 10.1295/polymj.7.20710.1295/polymj.7.207 ↗
23. 10.1016/j.polymer.2013.12.04810.1016/j.polymer.2013.12.048 ↗
24. 10.1063/1.161575510.1063/1.1615755 ↗
25. 10.1002/pen.76024081010.1002/pen.760240810 ↗
26. 10.1021/ma00121a02710.1021/ma00121a027 ↗
27. 10.1002/(SICI)1099-0518(19971130)35:16<3393::AID-POLA7>3.0.CO;2-T10.1002/(SICI)1099-0518(19971130)35:16<3393::AID-POLA7>3.0.CO;2-T ↗
28. 10.1007/s00289-006-0577-410.1007/s00289-006-0577-4 ↗
29. 10.1016/j.polymer.2013.08.05010.1016/j.polymer.2013.08.050 ↗
30. 10.1016/S0032-3861(02)00151-910.1016/S0032-3861(02)00151-9 ↗
31. 10.1016/j.eurpolymj.2003.11.02110.1016/j.eurpolymj.2003.11.021 ↗
32. 10.1016/S0032-3861(00)00567-X10.1016/S0032-3861(00)00567-X ↗
33. 10.1002/pen.1005110.1002/pen.10051 ↗
34. 10.1021/j150562a00310.1021/j150562a003 ↗
35. 10.1002/pol.1956.12020950310.1002/pol.1956.120209503 ↗
36. 10.1088/0370-1301/69/8/30510.1088/0370-1301/69/8/305 ↗
37. 10.1002/polb.108610.1002/polb.1086 ↗