Removal of Resin from Mechanical Pulps by Selective Flotation: Mechanisms of Resin Flotation and Yield Loss of Fibers
Source abstract
Abstract
The amount of wood resin in mechanical pulp suspensions could be decreased using a selective flotation process. In selective flotation air‐bubbles are dispersed into low consistency pulp suspensions mechanically by an impeller or by injectors. Resin particles attach to the air‐bubbles and are lifted to the top of the pulp suspension from where they are removed, along with the flotation froth. The very small size of the resin particles (average diameter <1.0 micron) suggests that they are driven toward the air‐bubbles mainly by Brownian diffusion and that attachment of the resin particles to the air‐bubbles takes place through colloidal interactions. The resin flotation followed approximate first‐order kinetics. The mechanism of yield loss of fibers was entrainment, whereby they were hydraulically transported into the froth along with the water.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Minerals Flotation and Separation Techniques · Characterization and Applications of Magnetic Nanoparticles · Pickering emulsions and particle stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Back E. L. · 2000 · 1
2. Cisneros, H. A. and Drummond, J. G. 1995.81st Annual Meeting Technical Section, CPPA. 1995, Montréal, Canada. Release of resin during mechanical pulping. In, pp.B97–B103. Preprints B
3. Back E. L. · 2000 · 151
4. Brandal J. · Pulp Paper Mag. Can. · 1966 · 67 · T431
5. Sundberg A. · Nord. Pulp Pap. Res. J. · 2000 · 15 · 4610.3183/NPPRJ-2000-15-01-p046-053 ↗
6. Kokkonen P. · Nord. Pulp Pap. Res. J. · 2002 · 17 · 38210.3183/NPPRJ-2002-17-04-p382-386 ↗
7. Allen L. H. · 2000 · 307
8. Korpela A. · Int. Papwirtsch. · 2002 · 6 · 86
9. Nguyen A. V. · 2004 · 118
10. Schulze, H. J. 1991.1st Research Forum on Recycling, CPPA. 1991, Toronto, Canada. The fundamentals of flotation deinking in comparison to mineral flotation. In, pp.161–167.
11. Holik H. · 2000 · 7 · 88
12. Amand J. S. · 2001 · 1 · 81
13. Larsson A. · Papperstidn · 1984 · 87 · R158
14. Schmidt D. C. · Prog. Pap. Recycling · 1996 · 2 · 67
15. Ajersch, M. 1997. “Mechanism of pulp loss in flotation deinking”. 283Ottawa, Canada: Dissertation at McMaster University. UMI Dissertation Services
16. Deng Y. · Nord. Pulp Pap. Res. J. · 1998 · 13 · 410.3183/NPPRJ-1998-13-01-p004-009 ↗
17. Kowalewsky I. I. · Zellstoff Papier · 1933 · 13 · 338
18. Ströle U. · Papier · 1956 · 10 · 264
19. Ogait A. · Papier · 1961 · 15 · 10
20. Vähäsalo L. · Pap. Technol · 2003 · 44 · 45
21. Holmbom, B. and Örså, F. 1993.Seventh International Symposium on Wood and Pulping Chemistry, Technical Association of the Paper Industry. 1993, Beijing, China. Methods for analysis of dissolved and colloidal wood components in papermaking process waters and effluents. In, Vol. 2, pp.810–817.
22. Holmbom B. · Wochenbl. Papierfabr · 2003 · 131 · 1305
23. Allen L. H. · TAPPI · 1980 · 63 · 81
24. Nguyen A. V. · 2004 · 118 · 781
25. Trahar W. J. · Int. J. Miner. Process · 1976 · 3 · 10310.1016/0301-7516(76)90029-6 ↗
26. Reay D. · Can. J. Chem. Eng. · 1973 · 51 · 17810.1002/cjce.5450510207 ↗
27. Derjaguin B. V. · 1984 · 13 · 7110.1007/978-1-4615-7972-4_2 ↗
28. Paulson A. · Langmuir · 1996 · 12 · 480810.1021/la960128n ↗
29. Collins G. L. · Chem. Eng. Sci. · 1976 · 31 · 98510.1016/0009-2509(76)87019-4 ↗