journal article·2021-09Open access

Effect of temperature on the growth of TiN thin films by oblique angle sputter-deposition: A three-dimensional atomistic computational study

Rubenson Mareus, Cédric Mastail, Florin Nita, Anny Michel, Grégory Abadias

Abstract

Abstract Kinetic Monte Carlo (kMC) atomistic computations using MODENA code were employed to simulate the growth of columnar TiN thin films under oblique angle deposition geometry. The influence of substrate temperature (300, 400 and 500 K) on the morphology (column tilt angle, average layer density, compactness, surface roughness) of the layers was studied by varying the inclination angle α of the substrate from 5° to 85° with respect to the centerline of the source. Two types of simulations were considered in this work: the first one assumes a collimated flux (CF) of incident particles and the second one grasps the angular distribution of sputtered Ti particles to closely mimic the magnetron sputtering (MS) conditions. The formation of separated columns with high aspect ratio, and tilted in the direction of the incident particles flux, is observed for α ≥ 35° for the two types of particle flux. The column width and tilt angle, the average layer density and the compactness of the TiN films are found to increase with increasing substrate temperature, due to enhanced surface diffusion. The column tilt angle β increases from 3° to 60° with increasing α for the CF case, while it saturates to approx. 35° when the MS distribution is considered. The relationship between β and α, and their temperature dependence, are discussed and compared to experimental results obtained on sputter-deposited TiN films, as well as with other results and models reported in the literature. The code also reproduces morphological features common to most films produced at glancing angles, such as column broadening with increasing thickness and their anisotropic aggregation (bundling association) in the transverse direction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Optical Coatings and Gratings · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Tailoring growth and local composition by oblique-incidence deposition: a review and new experimental data10.1016/0927-796X(94)90021-3 ↗
2. Glancing angle deposition: fabrication, properties, and applications of micro- and nanostructured thin films10.1116/1.2764082 ↗
3. Perspectives on oblique angle deposition of thin films: From fundamentals to devices10.1016/j.pmatsci.2015.06.003 ↗
4. Anisotropic optical thin films finely sculptured by substrate sweep technology10.1364/OE.16.005372 ↗
5. Abnormal residual stress in nanostructured al thin films grown on Ti/glass substrates10.1016/j.cap.2013.07.022 ↗
6. Physical and micro-nano-structure properties of chromium nitride coating deposited by RF sputtering using dynamic glancing angle deposition10.1016/j.surfcoat.2019.05.023 ↗
7. Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design10.1016/j.matdes.2018.11.028 ↗
8. Engineering epitaxial-nanospiral metal films using dynamic oblique angle deposition10.1021/cg400142g ↗
9. Multi-component nanostructure design by atomic shadowing10.1016/j.tsf.2008.05.049 ↗
10. Temperature threshold for nanorod structuring of metal and oxide films grown by glancing angle deposition10.1116/1.3525882 ↗
11. Highly anisotropic titanium nitride nanowire arrays for low-loss hyperbolic metamaterials fabricated via dynamic oblique deposition10.1088/1361-6528/ab1d17 ↗
12. Branched Ta nanocolumns grown by glancing angle deposition10.1063/1.2204759 ↗
13. Growth of Y-shaped nanorods through physical vapor deposition10.1021/nl0518425 ↗
14. Quantification of porosity and deposition rate of nanoporous films grown by oblique-angle deposition10.1063/1.2981690 ↗
15. Tunable nanostructured columnar growth of SnO2 for efficient detection of CO gas10.1088/1361-6528/aa9bc0 ↗
16. Exploiting the dodecane and ozone sensing capabilities of nanostructured tungsten oxide films10.1016/j.snb.2018.03.190 ↗
17. Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection10.1038/nphoton.2007.26 ↗
18. Bending induced self-organized switchable gratings on polymeric substrates10.1021/am5037687 ↗
19. Highly improved responsivity of self-powered UV–Visible photodetector based on TiO2/Ag/TiO2 multilayer deposited by GLAD technique: Effects of oriented columns and nano-sculptured surface10.1016/j.apsusc.2020.147069 ↗
20. Optical and nanostructural insights of oblique angle deposited layers applied for photonic coatings10.1016/j.apsusc.2020.146312 ↗
21. GLAD Pt–Ni alloy nanorods for oxygen reduction reaction10.1021/cs400759u ↗
22. Sputter-deposited Pt PEM fuel cell electrodes: particles vs layers10.1149/1.3097188 ↗
23. Periodic Pt nanorod arrays with controlled porosity for oxygen reduction reaction10.1166/nnl.2012.1439 ↗
24. Achieving on chip micro-supercapacitors based on CrN deposited by bipolar magnetron sputtering at glancing angle10.1016/j.electacta.2019.134890 ↗
25. Nanostructured porous CrN thin films by oblique angle magnetron sputtering for symmetric supercapacitors10.1016/j.jallcom.2019.07.325 ↗
26. Control of hydrophobic surface and wetting states in ultra-flat ZnO films by GLAD method10.1016/j.apsusc.2017.01.266 ↗
27. Binary Fe-Pd submicron structures fabricated through glancing angle deposition (GLAD) for bioapplications10.1016/j.matdes.2017.06.032 ↗
28. Self-shadowing and surface diffusion effects in obliquely deposited thin films10.1016/S0040-6090(98)01154-7 ↗
29. Oblique evaporation and surface diffusion10.1016/S0040-6090(97)00095-3 ↗
30. Microfractography of thin films
31. Modeling and characterization of columnar growth in evaporated-films10.1016/0040-6090(93)90378-3 ↗
32. A model for column angle evolution during oblique angle deposition10.1063/1.3465296 ↗
33. Nanocolumnar growth of thin films deposited at oblique angles: Beyond the tangent rule
34. Tilting angle of nanocolumnar films fabricated by oblique angle deposition10.1116/1.4710999 ↗
35. Critical angles in DC magnetron glad thin films10.1016/j.vacuum.2016.07.012 ↗
36. Tilt angle control of nanocolumns grown by glancing angle sputtering at variable argon pressures10.1063/1.3506502 ↗
37. Comparative study of sculptured metallic thin films deposited by oblique angle deposition at different temperatures10.3762/bjnano.9.89 ↗
38. Effect of vapour incidence angles on profile and properties of condensed films10.1016/0040-6090(72)90276-3 ↗
39. Columnar structure and texture of iron films evaporated at oblique incidence10.1016/0040-6090(82)90428-X ↗
40. Tilt of the columnar microstructure in off-normally deposited thin films using highly ionized vapor fluxes10.1063/1.4804066 ↗
41. Synthesis of nanostructured Ti thin films by combining glancing angle deposition and magnetron sputtering: a joint experimental and modeling study10.1016/j.tsf.2017.06.006 ↗
42. A two-dimensional Monte Carlo model for thin film growth by oblique evaporation: simulation of two-component systems for the example of CoCr10.1016/0040-6090(92)90489-X ↗
43. Model for columnar microstructure of thin solid films10.1103/PhysRevLett.56.1396 ↗
44. Oblique-incidence anisotropy of the iron films evaporated at low substrate temperatures10.1016/0304-8853(88)90286-7 ↗
45. Three-dimensional kinetic Monte Carlo simulations of cubic transition metal nitride thin film growth10.1103/PhysRevB.93.064107 ↗
46. Nanocolumnar TiN thin film growth by oblique angle sputter-deposition: experiments vs. simulations10.1016/j.matdes.2018.09.023 ↗
47. Chiro-plasmonic refractory metamaterial with titanium nitride (TiN) core-shell nanohelices10.1088/1361-6528/aabb4a ↗
48. Optical properties and plasmonic performance of titanium nitride10.3390/ma8063128 ↗
49. Extinction properties of obliquely deposited TiN nanorod arrays10.3390/coatings8120465 ↗
50. Deposited ultra-thin titanium nitride nanorod array as a plasmonic near-perfect light absorber10.1038/s41598-020-79399-4 ↗
51. Tunable optical materials for multi-resonant plasmonics: from TiN to TiON [Invited]10.1364/OME.382160 ↗
52. Nonmetallic materials for plasmonic hot carrier excitation10.1002/adom.201800603 ↗
53. Biaxially aligned titanium nitride thin films deposited by reactive unbalanced magnetron sputtering10.1016/j.surfcoat.2004.09.012 ↗
54. Texture and stress evolution in HfN films sputter-deposited at oblique angles10.3390/coatings9110712 ↗
55. Oblique angle deposition of nanocolumnar TiZrN films via reactive magnetron co-sputtering technique: The influence of the Zr target powers10.1016/j.cap.2019.05.002 ↗
56. Effect of the period of the substrate oscillation in the dynamic glancing angle deposition technique: a columnar periodic nanostructure formation10.1016/j.surfcoat.2019.125237 ↗
57. Theoretical and experimental characterization of TiO2 thin films deposited at oblique angles10.1088/0022-3727/44/38/385302 ↗
58. The metal flux from a rotating cylindrical magnetron: a Monte Carlo simulation10.1088/0022-3727/41/20/205307 ↗
59. Ziegler · 1985
60. Pathways of atomistic processes on TiN(001) and (111) surfaces during film growth: An ab initio study10.1063/1.1567797 ↗
61. Adsorption and pathways of single atomistic processes on TiN (1 1 1) surfaces: a first principle study10.1016/j.commatsci.2013.04.036 ↗
62. Effect of Al substitution on Ti, Al, and N adatom dynamics on TiN(001), (011), and (111) surfaces10.1016/j.susc.2014.06.010 ↗
63. Nanostructured Ti thin films by magnetron sputtering at oblique angles10.1088/0022-3727/49/4/045303 ↗
64. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
65. AtomEye: an efficient atomistic configuration viewer10.1088/0965-0393/11/2/305 ↗
66. Porosity control in zig-zag vapor-deposited films10.1016/j.tsf.2004.02.034 ↗
67. Columnar microstructure in vapor-deposited thin films10.1016/0040-6090(77)90037-2 ↗
68. Experimental and modeling study of the fabrication of Mg nano-sculpted films by magnetron sputtering combined with glancing angle deposition10.3390/coatings9060361 ↗
69. Influence of thickness and sputtering pressure on electrical resistivity and elastic wave propagation in oriented columnar tungsten thin films10.3390/nano10010081 ↗
70. A theoretical model for the electrical properties of chromium thin films sputter deposited at oblique incidence10.1088/0022-3727/44/21/215301 ↗
71. Kinetic energy-induced growth regimes of nanocolumnar Ti thin films deposited by evaporation and magnetron sputtering10.1088/1361-6528/ab3cb2 ↗
72. Surface kinetics and subplantation phenomena affecting the texture, morphology, stress, and growth evolution of titanium nitride films10.1063/1.1811389 ↗
73. The microstructure of sputter-deposited coatings10.1116/1.573628 ↗
74. Biaxial alignment in sputter deposited thin films10.1016/j.tsf.2006.06.027 ↗
75. Structure zone model for extreme shadowing conditions10.1016/j.tsf.2012.11.007 ↗
76. Recent advances in the development of nano-sculpted films by magnetron sputtering for energy-related applications10.3390/nano10102039 ↗
77. Nanocolumnar association and domain formation in porous thin films grown by evaporation at oblique angles10.1088/0957-4484/27/39/395702 ↗
78. Growth behavior of evaporated porous thin films10.1557/JMR.2002.0421 ↗
79. In situ and real-time nanoscale monitoring of ultra-thin metal film growth using optical and electrical diagnostic tools10.3390/nano10112225 ↗
80. Study of columnar growth, texture development and wettability of reactively sputter-deposited TiN, ZrN and HfN thin films at glancing angle incidence10.1016/j.surfcoat.2020.126130 ↗
81. Correlation of structural and optical properties using virtual materials analysis10.1364/OE.27.022209 ↗