Insight into ideal shear strength of Ni-based dilute alloys using first-principles calculations and correlational analysis
Source abstract
Abstract
The present work examines the effect of alloying elements (denoted X) on the ideal shear strength for 26 dilute Ni-based alloys, Ni$11$X, as determined by first-principles calculations of pure alias shear deformations. The variations in ideal shear strength are quantitatively explored with correlational analysis techniques, showing the importance of atomic properties such as size and electronegativity. The shear moduli of the alloys are affirmed to show a strong linear relationship with their ideal shear strengths, while the shear moduli of the individual alloying elements were not indicative of alloy shear strength. Through combination with available ideal shear strength data on Mg alloys, a potential application of the Ni alloy data is demonstrated in the search for a set of atomic features suitable for machine learning applications to mechanical properties. As another illustration, the predicted Ni ideal shear strengths play a key role in a predictive multiscale framework for deformation behavior of single crystal alloys at large strains, as shown by simulated stress-strain curves.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Zur Theorie der Elastizitätsgrenze und der Festigkeit kristallinischer Körper10.1007/BF01397292 ↗
2. The ideal strength of iron in tension and shear10.1016/S1359-6454(03)00033-8 ↗
3. Ideal shear strain of metals and ceramics10.1103/PhysRevB.70.104104 ↗
4. The ideal strength of tungsten10.1080/01418610108216634 ↗
5. Connecting atomistic and experimental estimates of ideal strength10.1103/PhysRevB.65.134111 ↗
6. Achieving the ideal strength in annealed molybdenum nanopillars10.1016/j.actamat.2010.05.052 ↗
7. Predictive Crystal Plasticity Modeling of Single Crystal Nickel Based on First-Principles Calculations10.1007/s11837-022-05175-6 ↗
8. U. Messerschmidt, Dislocation dynamics during plastic deformation, in: Springer Ser. Mater. Sci., Springer, Heidelberg ; New York, 2010, pp. 1–499.10.1007/978-3-642-03177-9 ↗
9. Size-affected single-slip behavior of pure nickel microcrystals10.1016/j.actamat.2005.05.023 ↗
10. Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples10.1016/j.scriptamat.2006.09.016 ↗
11. Nanoindentation and Nano-compresion Testing of Ni3Al Precipitates
12. Ideal Pure Shear Strength of Aluminum and Copper10.1126/science.1076652 ↗
13. Temperature effect on ideal shear strength of Al and Cu10.1103/PhysRevB.84.224118 ↗
14. PRISMS: An Integrated, Open-Source Framework for Accelerating Predictive Structural Materials Science10.1007/s11837-018-3079-6 ↗
15. DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
16. Computational thermodynamics and its applications10.1016/j.actamat.2020.08.008 ↗
17. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
18. Phase-Field Models for Microstructure Evolution10.1146/annurev.matsci.32.112001.132041 ↗
19. The peierls stress of dislocations: An analytic formula10.1103/PhysRevLett.78.266 ↗
20. Tensile and shear loading of four fcc high-entropy alloys: A first-principles study
21. First-principles investigation of the micromechanical properties of fcc-hcp polymorphic high-entropy alloys10.1038/s41598-018-29588-z ↗
22. Compositional effects on ideal shear strength in Fe-Cr alloys10.1016/j.jallcom.2017.05.167 ↗
23. Generalized stacking fault energy, ideal strength and twinnability of dilute Mg-based alloys: A first-principles study of shear deformation10.1016/j.actamat.2013.12.019 ↗
24. Uncovering the influence of metallic and non-metallic impurities on the ideal shear strength and ductility of Ti: An ab-initio study10.1016/j.jallcom.2019.02.231 ↗
25. Effect of the alloying element on the temperature-dependent ideal shear strength of γ′-Ni 3 Al10.1039/C5RA24108A ↗
26. Transition-metal-element dependence of ideal shear strength and elastic behaviors of γ′-Ni3Al: ab initio study to guide rational alloy design10.1016/j.jallcom.2019.07.284 ↗
27. Recent advances and applications of machine learning in solid-state materials science10.1038/s41524-019-0221-0 ↗
28. A machine learning approach for engineering bulk metallic glass alloys10.1016/j.actamat.2018.08.002 ↗
29. A predictive machine learning approach for microstructure optimization and materials design10.1038/srep11551 ↗
30. J. Ling, E. Antono, S. Bajaj, S. Paradiso, M. Hutchinson, B. Meredig, B.M. Gibbons, Machine Learning for Alloy Composition and Process Optimization, in: Vol. 6 Ceram. Control. Diagnostics, Instrumentation; Educ. Manuf. Mater. Metall., American Society of Mechanical Engineers, 2018. https://doi.org/10.1115/GT2018-75207.10.1115/GT2018-75207 ↗
31. Learning grain boundary segregation energy spectra in polycrystals10.1038/s41467-020-20083-6 ↗
32. Finding Nature’s Missing Ternary Oxide Compounds Using Machine Learning and Density Functional Theory10.1021/cm100795d ↗
33. Correlation analysis of materials properties by machine learning: Illustrated with stacking fault energy from first-principles calculations in dilute fcc-based alloys10.1088/1361-648X/ac0195 ↗
34. Ocean of Data: Integrating First-Principles Calculations and CALPHAD Modeling with Machine Learning10.1007/s11669-018-0654-z ↗
35. Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties10.2514/1.18239 ↗
36. K. Persson, Materials Data on Ni (SG:225) by Materials Project, (2016). https://doi.org/10.17188/1199153.
37. Temperature-dependent ideal strength and stacking fault energy of fcc Ni: a first-principles study of shear deformation10.1088/0953-8984/24/15/155402 ↗
38. Geometry optimization of periodic systems using internal coordinates10.1063/1.1864932 ↗
39. Basal-plane stacking-fault energies of Mg: A first-principles study of Li- and Al-alloying effects10.1016/j.scriptamat.2010.11.034 ↗
40. Shear deformation, ideal strength, and stacking fault formation of fcc metals: A density-functional study of Al and Cu10.1103/PhysRevB.79.224103 ↗
41. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
42. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
43. Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation10.1103/PhysRevB.46.6671 ↗
44. Effects of alloying element and temperature on the stacking fault energies of dilute Ni-base superalloys10.1088/0953-8984/24/50/505403 ↗
45. A comprehensive first-principles study of solute elements in dilute Ni alloys: Diffusion coefficients and their implications to tailor creep rate10.1016/j.actamat.2018.07.020 ↗
46. High-precision sampling for Brillouin-zone integration in metals10.1103/PhysRevB.40.3616 ↗
47. First-principles elastic constants of α- and θ-Al2O310.1063/1.2711762 ↗
48. A Simple Explicit Formula for the Voigt-Reuss-Hill Average of Elastic Polycrystals with Arbitrary Crystal and Texture Symmetries10.1007/s10659-011-9312-y ↗
49. On the Theory of Super-Lattice Structures in Alloys
50. An introduction to variable and feature selection
51. Detecting Novel Associations in Large Data Sets10.1126/science.1205438 ↗
52. Equitability, mutual information, and the maximal information coefficient10.1073/pnas.1309933111 ↗
53. A practical tool for maximal information coefficient analysis10.1093/gigascience/giy032 ↗
54. Theoretical and Empirical Analysis of ReliefF and RReliefF10.1023/A:1025667309714 ↗
55. The Mathworks Inc., MATLAB - MathWorks, Www.Mathworks.Com/Products/Matlab. (2019).
56. Minerva and minepy: A C engine for the MINE suite and its R, Python and MATLAB wrappers10.1093/bioinformatics/bts707 ↗
57. Accurate and simple analytic representation of the electron-gas correlation energy10.1103/PhysRevB.45.13244 ↗
58. Pop-in effect as homogeneous nucleation of dislocations during nanoindentation10.1103/PhysRevB.67.172101 ↗
59. Miedema Calculator: A thermodynamic platform for predicting formation enthalpies of alloys within framework of Miedema’s Theory10.1016/j.cpc.2016.08.013 ↗
60. Calculation of debye temperature for crystalline structures—a case study on Ti, Zr, and Hf10.1016/S1359-6454(01)00002-7 ↗
61. The bonding electron density in aluminum10.1126/science.1198543 ↗
62. A strategy to apply machine learning to small datasets in materials science10.1038/s41524-018-0081-z ↗
63. Generalized stacking fault energy, ideal strength and twinnability of dilute Mg-based alloys: A first-principles study of shear deformation10.1016/j.actamat.2013.12.019 ↗
64. ADAIS: Automatic Derivation of Anisotropic Ideal Strength via high-throughput first-principles computations10.1016/j.cpc.2018.12.012 ↗
65. Y. Wang, M. Liao, B.J. Bocklund, P. Gao, S.-L. Shang, H. Kim, A.M. Beese, L.-Q. Chen, Z.-K. Liu, DFTTK: Density Functional Theory Tool Kit for High-throughput Calculations of Thermodynamic Properties at Finite Temperatures, Calphad 75 (2021) 102355, doi: 10.1016/j.calphad.2021.102355.10.1016/j.calphad.2021.102355 ↗
66. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
67. Abaqus User Manual v2017, DS SIMULIA. (2017).
68. Plastic deformation of nickel single crystals at low temperatures10.1080/14786435808236826 ↗
69. The relationship between the irradiation induced damage and the mechanical properties of single crystal Ni
70. First-principles calculations of generalized-stacking-fault-energy of Co-based alloys10.1016/j.commatsci.2016.04.031 ↗
71. A Statistical Theory of Solid Solution Hardening10.1002/pssb.19700410221 ↗
72. Quantitative prediction of solute strengthening in aluminium alloys10.1038/nmat2813 ↗
73. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
74. Wolfram version 11.3, Wolfram Mathematica: Modern Technical Computing, Wolfram - 11.3. (2019) version 11.3. https://www.wolfram.com/mathematica/.
75. PubChem Database, Periodic Table of Elements - PubChem, (2019). https://pubchem.ncbi.nlm.nih.gov/periodic-table/.
76. Binary, ternary and quaternary compound former/nonformer prediction via Mendeleev number10.1016/S0925-8388(00)01410-9 ↗
77. M. Winter, WebElements, Univ. Sheff. (2011).
78. Ansys/Granta Materials Database, Azom materials public datapages, (2020). http://www.azom.com/; https://www.grantadesign.com/industry/products/data/.
79. Experimental equations of state for calcium, strontium, and barium metals to 20 kbar from 4 to 295 K10.1103/PhysRevB.41.3329 ↗
80. Handbook of the Physicochemical Properties of the Elements, Springer
81. Kittel · 2005
82. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
83. A comprehensive first-principles study of pure elements: Vacancy formation and migration energies and self-diffusion coefficients10.1016/j.actamat.2016.02.031 ↗
84. Systematization of the stable crystal structure of all AB-type binary compounds: A pseudopotential orbital-radii approach10.1103/PhysRevB.22.5839 ↗