journal article·2022-09Open access

A molecular dynamics simulation study on the role of graphene in enhancing the arc erosion resistance of Cu metal matrix

Ruoyu Xu, Mingyu Zhou, Xin Wang, Shanika Yasantha Matharage, Jiu Dun Yan, Andrew Connolly, Yi Luo, Yi Ding, Zhongdong Wang

Abstract

• MD simulation is used to study impact of graphene on arc erosion resistence of Cu. • Arc erosion of circuit breaker contacts was simplified as ion bombardment. • Graphene can dissipate the energy transferred from incident ions by a shock wave. • Graphene can prevent sputter of recoiled Cu atoms. • Gr-Cu has less sputtered Cu atoms and shallower pits on Cu surface than pure Cu. Molecular dynamics simulation has been applied to study the mechanisms through which graphene protects Cu from arc erosion in Cu-W arcing contacts. The impact of arc erosion has been simplified as positive ion bombardments on a cathode surface. Sulphur ions were used as incident ions while the number of ions, incident energy, and incident area varied during the simulations. Cu covered by a graphene layer had fewer vacancies and sputtered atoms than in the pure Cu system. Results show that the graphene layer can dissipate the energy transferred from incident ions by a shock wave, and also prevent recoiled Cu atoms from penetrating the graphene layer resulting in better arc erosion performances than in the pure Cu system. For both models, the sputtering yield gradually decreases and maintains a very low value as the number of incident ions increases. Similar to the experimental results, the residual erosion crater on the Cu surface covered by graphene was shallower than that without a graphene layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Garzon · 2002
2. Ito · 2019
3. High-power plasma generators10.1080/10519999008225527 ↗
4. Electric arc generators of thermal plasma (review)10.1080/10519999608228824 ↗
5. A 170-kA DC circuit breaker for the quench protection of the central solenoid coil of the ITER tokamak10.1016/S0920-3796(00)00106-X ↗
6. High power short circuit studies on a commercial 420 kV 60 kA puffer circuit breaker10.1109/TPAS.1985.319062 ↗
7. Recent progress in development of tungsten-copper composites: fabrication, modification and applications10.1016/j.ijrmhm.2018.03.014 ↗
8. W–Cu composites with submicron- and nanostructures: progress and challenges10.1038/s41427-019-0179-x ↗
9. Effects of Zr addition on properties and vacuum arc characteristics of Cu-W alloy10.1016/j.vacuum.2014.03.009 ↗
10. From solid solutions to fully phase separated interpenetrating networks in sputter deposited ‘immiscible’ W-Cu thin films10.1016/j.actamat.2015.07.050 ↗
11. The thermo-mechanical behaviour of W-Cu metal matrix composites for fusion heat sink applications: the influence of the Cu content10.1016/j.jnucmat.2017.08.020 ↗
12. G.C. Ma, J.L. Fan, H.R. Gong, Mechanical behavior of Cu-W interface systems upon tensile loading from molecular dynamics simulations, Comput. Mater. Sci. 152(November 2017) (2018) 165–168. doi: 10.1016/j.commatsci.2018.05.030.10.1016/j.commatsci.2018.05.030 ↗
13. Effect of Fe on vacuum breakdown properties of CuW alloys10.1016/j.ijrmhm.2011.04.014 ↗
14. Microstructure effect on reignition and welding properties of copper-tungsten electric contact
15. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
16. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
17. Promises, facts and challenges for graphene in biomedical applications10.1039/C7CS00363C ↗
18. Superior thermal conductivity of single-layer graphene10.1021/nl0731872 ↗
19. Enhanced strength in bulk graphene-copper composites
20. Temperature-dependent mechanical properties of graphene/cu nanocomposites with in-plane negative Poisson’s ratios10.34133/2020/5618021 ↗
21. Enhanced mechanical properties of graphene/copper nanocomposites using a molecular-level mixing process10.1002/adma.201302495 ↗
22. Graphene-boundary strengthening mechanism in Cu/graphene nanocomposites: a molecular dynamics simulation10.1016/j.matdes.2020.108555 ↗
23. Mechanical properties and thermal conductivity of graphene reinforced copper matrix composites10.1016/j.powtec.2016.06.045 ↗
24. Microstructure, electrical conductivity and hardness of multilayer graphene/Copper nanocomposites synthesized by flake powder metallurgy10.1007/s12540-015-5058-6 ↗
25. Aligning graphene in bulk copper: Nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity10.1016/j.carbon.2017.02.089 ↗
26. W-Cu composites reinforced by copper coated graphene prepared using infiltration sintering and spark plasma sintering: a comparative study10.1016/j.ijrmhm.2019.03.026 ↗
27. Effect of interfacial bonding on dislocation strengthening in graphene nanosheet reinforced iron composite: a molecular dynamics study10.1016/j.commatsci.2021.110309 ↗
28. Atomistic simulation of the nanoindentation behavior of graphene/Al multilayered nanocomposites10.1088/1757-899X/531/1/012055 ↗
29. Novel aluminum-graphene and aluminum-graphite metallic composite materials: Synthesis and properties10.1016/j.jallcom.2015.12.084 ↗
30. J.Q. Zhu, Q.S. Yang, X.Q. He, K.K. Fu, Micro-mechanism of interfacial separation and slippage of graphene/aluminum nanolaminated composites, Nanomaterials 8(12) (2018). doi: 10.3390/NANO8121046.10.3390/nano8121046 ↗
31. Investigation on arc erosion behaviors and mechanism of W70Cu30 electrical contact materials adding graphene10.1016/j.jallcom.2016.12.044 ↗
32. Microstructure and properties characterization of tungsten–copper composite materials doped with graphene10.1016/j.jallcom.2016.10.310 ↗
33. Work function and secondary emission studies of various Cu crystal faces10.1063/1.323329 ↗
34. Theoretical maps of work-function anisotropies
35. Doping graphene with metal contacts10.1103/PhysRevLett.101.026803 ↗
36. Melting of graphene clusters10.1103/PhysRevB.87.134103 ↗
37. Investigation on erosion of Cu/W contacts in high-voltage circuit breakers10.1109/TCAPT.2006.880476 ↗
38. Opening electrical contacts: the transition from the molten metal bridge to the electric arc10.1587/transele.E93.C.1380 ↗
39. P. G. Slade, Electrical Contacts: Principles and Applications, second ed. CRC Press, 2014. ISBN: 978-1-4398-8131-6.
40. Theory and modelling of arc cathodes10.1088/0963-0252/11/3A/307 ↗
41. M. H. Kim, K. H. Kim, A. Smajkic, M. Kapetanovic, and M. Muratovic, “Influence of contact erosion on the state of SF6 gas in interrupter chambers of HV SF6 circuit breakers, Proc. 2014 IEEE Int. Power Modul. High Volt. Conf. IPMHVC 2014, pp. 466–469, 2015. doi: 10.1109/IPMHVC.2014.7287312.10.1109/IPMHVC.2014.7287312 ↗
42. The influence of electrode erosion on the air arc in a low-voltage circuit breaker10.1063/1.3176983 ↗
43. Theoretical study of factors influencing arc erosion of cathode10.1109/95.296375 ↗
44. Resistance heating in the arc cathode spot zone10.1063/1.1736153 ↗
45. Radiation emission coefficients for sulfur hexafluoride arc plasmas10.1016/0022-4073(76)90067-4 ↗
46. SF6 Decomposition in Gas-Insulated Equipment10.1109/TEI.1986.348921 ↗
47. Electron structure to SF610.1063/1.450850 ↗
48. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
49. A reactive potential for hydrocarbons with intermolecular interactions10.1063/1.481208 ↗
50. Simulations of collision cascades in Cu-Nb layered composites using an EAM interatomic potential10.1142/S1758825109000216 ↗
51. Role of graphene layers on the radiation resistance of copper–graphene nanocomposite: Inhibiting the expansion of thermal spike10.1016/j.jnucmat.2017.06.023 ↗
52. Structure and dynamics of graphite-supported bimetallic nanoclusters10.1016/j.susc.2003.08.050 ↗
53. The stopping and range of ions in matter10.1007/978-1-4615-8103-1_3 ↗
54. Enhanced self-healing of irradiation defects near a Ni–graphene interface by damaged graphene: Insights from atomistic modeling10.1016/j.jpcs.2020.109909 ↗
55. Study on low-energy sputtering near the threshold energy by molecular dynamics simulations10.1063/1.4738951 ↗
56. Theory of sputtering. I. Sputtering yield of amorphous and polycrystalline targets10.1103/PhysRev.184.383 ↗
57. P.G. Turchanin, M.A. Agraval, Cohesive energy, properties, and formation energy of transition metal alloys, Powder Metall. Met. Ceram. 47 (2008) 26–39. doi: 10.1007/s11106-008-0006-3.10.1007/s11106-008-0006-3 ↗
58. Ion dose dependence of the sputtering yield of Ru(0001) at very low fluences10.1103/PhysRevLett.63.562 ↗
59. Low primary ion fluence dependence of single crystal sputtering: a molecular dynamics study10.1016/0168-583X(91)95881-D ↗
60. Trends in sputtering10.1016/S0079-6816(99)00021-0 ↗
61. Erosion of Cu–W contact material of SF6 circuit breakers when making capacitor bank10.1002/tee.23044 ↗