Strain-rate dependent crystal plasticity model and aluminum softening/hardening transition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. High-strength titanium alloys for aerospace engineering applications: A review on melting-forging process
2. Strain rate sensitivity of the ultrastrong gradient nanocrystalline 316L stainless steel and its rate-dependent modeling at nanoscale10.1016/j.ijplas.2020.102696 ↗
3. The effects of build orientation and hatch spacing on mechanical properties of medical Ti–6Al–4V alloy manufactured by selective laser melting10.1016/j.msea.2020.140649 ↗
4. Development of the post-form strength prediction model for a high-strength 6xxx aluminium alloy with pre-existing precipitates and residual dislocations10.1016/j.ijplas.2019.03.013 ↗
5. Atomistic studies of shock-induced plasticity and phase transition in iron-based single crystal with edge dislocation10.1016/j.ijplas.2018.11.004 ↗
6. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
7. Response of copper to shock-wave loading at temperatures up to the melting point10.1063/1.4819328 ↗
8. Dislocation arrangement in small crystal volumes determines power-law size dependence of yield strength10.1016/j.jmps.2012.10.002 ↗
9. Sur le durcissement dû à la recombinaison des dislocations10.1016/0001-6160(60)90150-4 ↗
10. Dislocation drag and its influence on elastic precursor decay10.1016/j.ijplas.2021.103030 ↗
11. Analytic model of the remobilization of pinned glide dislocations: Including dislocation drag from phonon wind10.1016/j.ijplas.2020.102750 ↗
12. Analytic model of the remobilization of pinned glide dislocations from quasi-static to high strain rates10.1016/j.ijplas.2015.01.008 ↗
13. A molecular dynamics study on the orientation, size, and dislocation confinement effects on the plastic deformation of Al nanopillars10.1016/j.ijplas.2012.11.002 ↗
14. Analytic model of dislocation density evolution in fcc polycrystals accounting for dislocation generation, storage, and dynamic recovery mechanisms10.1016/j.ijplas.2021.103178 ↗
15. Unusual plasticity and strength of metals at ultra-short load durations10.3367/UFNe.2016.12.038004 ↗
16. Simulation of shock wave propagation in single crystal and polycrystalline aluminum10.1016/j.ijplas.2014.04.012 ↗
17. Crystal plasticity FE modeling of Ti alloys for a range of strain-rates. Part I: A unified constitutive model and flow rule10.1016/j.ijplas.2016.09.002 ↗
18. A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates10.1016/j.ijplas.2010.03.002 ↗
19. A dislocation-based multi-rate single crystal plasticity model10.1016/j.ijplas.2012.12.006 ↗
20. Strain rate dependency of dislocation plasticity
21. The effects of temperature and strain rate in fcc and bcc metals during extreme deformation rates10.1016/j.actamat.2018.03.029 ↗
22. A multiscale strength model for extreme loading conditions10.1063/1.3553718 ↗
23. A unified model for coupling constitutive behavior and micro-defects evolution of aluminum alloys under high-strain-rate deformation10.1016/j.ijplas.2016.07.011 ↗
24. Constitutive modelling of plasticity of fcc metals under extremely high strain rates10.1016/j.ijplas.2011.12.001 ↗
25. Dislocation networks and the microstructural origin of strain hardening10.1103/PhysRevLett.121.085501 ↗
26. A model for the mobile dislocation density10.1016/0001-6160(74)90165-5 ↗
27. A dislocation density-based continuum model of the anisotropic shock response of single crystal α-cyclotrimethylene trinitramine10.1016/j.jmps.2016.09.005 ↗
28. Rahul, A fully anisotropic single crystal model for high strain rate loading conditions with an application to α-RDX10.1016/j.jmps.2013.10.012 ↗
29. A model for finite-deformation nonlinear thermomechanical response of single crystal copper under shock conditions10.1016/j.jmps.2013.05.002 ↗
30. Plane wave simulation of elastic-viscoplastic single crystals10.1016/j.jmps.2014.04.009 ↗
31. Dislocation mean free paths and strain hardening of crystals10.1126/science.1156101 ↗
32. From dislocation junctions to forest hardening10.1103/PhysRevLett.89.255508 ↗
33. Dislocation strengthening in FCC metals and in BCC metals at high temperatures10.1016/j.actamat.2016.12.040 ↗
34. Characterisation of high rate plasticity in the uniaxial deformation of high purity copper at elevated temperatures10.1016/j.ijplas.2017.11.006 ↗
35. Gilman · 1969 · 169
36. Dislocation generation in the two-dimensional Frenkel-Kontorova model at high stresses10.1103/PhysRevLett.57.2702 ↗
37. Elastic-plastic deformation of molybdenum single crystals shocked along [100]10.1063/1.4974475 ↗
38. A dislocation-based constitutive description for modeling the behavior of FCC metals within wide ranges of strain rate and temperature10.1016/j.mechmat.2011.09.008 ↗
39. Dynamic yield and tensile strength of aluminum single crystals at temperatures up to the melting point10.1063/1.1374478 ↗
40. Tensile deformation of aluminum single crystals at low temperatures10.1016/0001-6160(60)90127-9 ↗
41. Strain rate effect of high purity aluminum single crystals: Experiments and simulations10.1016/j.ijplas.2014.10.002 ↗
42. A genetic algorithm tutorial10.1007/BF00175354 ↗
43. Thermodynamics and kinetics of slip
44. Elastic precursor wave decay in shock-compressed aluminum over a wide range of temperature10.1063/1.5008280 ↗
45. Viscous drag on dislocations in aluminum at high strain rates10.1016/0001-6160(68)90054-0 ↗
46. Über den Einfluß thermisch angeregter Schallwellen auf die plastische Deformation10.1007/BF01329831 ↗
47. Modelling of shock waves in fcc and bcc metals using a combined continuum and dislocation kinetic approach10.1016/j.ijplas.2018.02.014 ↗
48. Parameterization of a rate-dependent model of shock-induced plasticity for copper, nickel, and aluminum10.1016/j.ijplas.2011.11.002 ↗
49. A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics10.1016/j.mechmat.2009.05.007 ↗
50. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
51. Predicting fatigue resistance of nano-twinned materials: Part I-Role of cyclic slip irreversibility and Peierls stress10.1016/j.ijfatigue.2014.05.014 ↗
52. Temperature dependence of the elastic constants of aluminum10.1016/0022-3697(79)90037-4 ↗
53. Third-order elastic constants of aluminum10.1103/PhysRev.175.955 ↗
54. The thermal expansion of pure metals: copper, gold, aluminum, nickel, and iron10.1103/PhysRev.60.597 ↗
55. Electroplastic behaviour in an aluminium alloy and dislocation density based modelling10.1016/j.matdes.2017.03.072 ↗
56. A constitutive model for fcc single crystals based on dislocation densities and its application to uniaxial compression of aluminium single crystals10.1016/j.actamat.2004.04.012 ↗
57. Strain rate history effects and dislocation substructure at high strain rates
58. Effect of temperature, strain, and strain rate on the flow stress of aluminum under shock-wave compression10.1063/1.4755792 ↗
59. Initial dislocation density effect on strain hardening in FCC aluminium alloy under laser shock peening10.1080/14786435.2017.1285073 ↗
60. Dislocation evolution and properties enhancement of GH2036 by laser shock processing: Dislocation dynamics simulation and experiment10.1016/j.msea.2015.12.007 ↗