journal article·2015-10Open access

Optimizing sawing of boards for furniture production using CT log scanning

Magnus Fredriksson

Journal of Wood Science· Volume 61· Issue 5

Abstract

The inherent variability of wood material together with sub-optimization in production processes means that a lot of potential value is lost. Computed tomography scanning together with simulation models of the production processes could remedy this, and ensure optimization of the entire production process. Therefore, the purpose of this study was to investigate if such methods can be used to optimize the sawing position of logs in a production process including further processing, in this case crosscutting to make a furniture product with strict quality requirements on dead knots. This was done on 47 Scots pine (Pinus sylvestris L.) logs. The results show a potential yield increase of more than 11 % points in the crosscutting operation and more than 4 % points when viewing the process as a whole, compared to sawing the logs horns down and centered.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Forest Biomass Utilization and Management · Forest ecology and management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Perstorper M, Pellicane PJ, Kliger IR, Johansson G (1995) Quality of timber products from Norway spruce. Wood Sci Technol 29(3):157–17010.1007/BF00204581 ↗
2. Usenius A, Song T, Heikkilä A (2007) Optimization of activities throughout the wood supply chain. In: Blanchet P (ed) Proceedings of the International Scientific Conference on Hardwood Processing, Quebec City, Canada, 24–26 Sept 2007
3. Beenhakker HL (1964) Optimization versus suboptimization. Int J Prod Res 3(4):317–32510.1080/00207546408943064 ↗
4. Pulkki R (2001) Role of supply chain management in the wise use of wood resources. South Afr For J 191(1):89–95
5. Swedish Forest Industries Federation (2012) Skogsindustrin—en faktasamling. 2012 års branschstatistik (in Swedish). (English title: The forest industry-a collection of facts. Industry statistics of 2012)
6. Lindgren O (1991) Medical CAT-scanning: X-ray absorption coefficients, CT-numbers and their relation to wood density. Wood Sci Technol 25(5):341–34910.1007/BF00226173 ↗
7. Zhu DP, Conners RW, Schmoldt DL, Araman PA (1996) A prototype vision system for analyzing CT imagery of hardwood logs. IEEE Trans Syst Man Cybern Part B Cybern 26(4):522–53210.1109/3477.517028 ↗
8. Bhandarkar SM, Faust TD, Tang M (1999) Catalog: a system for detection and rendering of internal log defects using computer tomography. Mach Vision Appl 11(4):171–19010.1007/s001380050100 ↗
9. Moberg L (2000) Models of internal knot diameter for Pinus sylvestris. Scand J Forest Res 15(2):177–18710.1080/028275800750014984 ↗
10. Alkan S, Zhang Y, Lam F (2007) Moisture distribution changes and wetwood behavior in subalpine fir wood during drying using high X-ray energy industrial CT scanner. Dry Technol 25(3):483–48810.1080/07373930601184023 ↗
11. Brüchert F, Baumgartner R, Sauter UH (2008) Ring width detection for industrial purposes-use of CT and discrete scanning technology on fresh roundwood. In: Gard WF, van de Kuilen JWG (eds) Proceedings of the COST E53 conference, Delft, Netherlands, 29–30 Oct 2008
12. Hou ZQ, Wei Q, Zhang SY (2009) Predicting density of green logs using the computed tomography technique. For Prod J 59(5):53–57
13. Longuetaud F, Mothe F, Kerautret B, Krähenbühl A, Hory L, Leban JM, Debled-Rennesson I (2012) Automatic knot detection and measurements from X-ray CT images of wood: a review and validation of an improved algorithm on softwood samples. Comput Electron Agric 85:77–8910.1016/j.compag.2012.03.013 ↗
14. Wei Q, Leblon B, La Rocque A (2011) On the use of X-ray computed tomography for determining wood properties: a review. Can J Forest Res 41(11):2120–214010.1139/x11-111 ↗
15. Giudiceandrea F, Ursella E, Vicario E (2011) A high speed CT scanner for the sawmill industry. In: Divos F (ed) Proceedings of the 17th International Non Destructive Testing and Evaluation of Wood Symposium, University of West Hungary, Sopron, Hungary, 14–16 Sept 2011
16. Magnusson Seger M, Danielsson PE (2003) Scanning of logs with linear cone-beam tomography. Comput Electron Agric 41(1):45–6210.1016/S0168-1699(03)00041-3 ↗
17. An Y, Schajer G (2014) Feature-specific CT measurements for log scanning: theory and application. Exp Mech 54(5):753–76210.1007/s11340-014-9853-7 ↗
18. Rinnhofer A, Petutschnigg A, Andreu JP (2003) Internal log scanning for optimizing breakdown. Comput Electron Agric 41(1):7–2110.1016/S0168-1699(03)00039-5 ↗
19. Lundahl CG, Grönlund A (2010) Increased yield in sawmills by applying alternate rotation and lateral positioning. For Prod J 60(4):331–338
20. Berglund A, Broman O, Grönlund A, Fredriksson M (2013) Improved log rotation using information from a computed tomography scanner. Comput Electron Agric 90:152–15810.1016/j.compag.2012.09.012 ↗
21. Broman O, Fredriksson M (2015) Effect of raw material on yield in a furniture production process. In: Proceedings of the 22nd International Wood Machining Seminar, Quebec City, Canada, 14–17 June 2015
22. Fredriksson M, Berglund A, Broman O (2015) Validating a crosscutting simulation program based on computed tomography scanning of logs. Holz Roh Werkst 73(2):143–15010.1007/s00107-014-0869-6 ↗
23. Grönlund A, Björklund L, Grundberg S, Berggren G (1995) Manual för furustambank (in Swedish). (English title: manual for pine stem bank.) Technical Report 1995:19. Luleå University of Technology, Luleå, Sweden
24. Nordmark U (2005) Value recovery and production control in the forestry wood chain using simulation technique. Dissertation, Luleå University of Technology, Sweden
25. Chiorescu S, Grönlund A (1999) Validation of a CT-based simulator against a sawmill yield. For Prod J 50(6):69–76
26. Moberg L, Nordmark U (2006) Predicting lumber volume and grade recovery for Scots pine stems using tree models and sawmill conversion simulation. For Prod J 56(4):68–74
27. Fredriksson M (2014) Log sawing position optimization using computed tomography scanning. Wood Mater Sci Eng 9(2):110–11910.1080/17480272.2014.904430 ↗
28. Mäkinen H (1999) Growth, suppression, death, and self-pruning of branches of Scots pine in southern and central Finland. Can J For Res 29(5):585–59410.1139/x99-026 ↗
29. Vestøl GI, Høibø OA (2000) Internal distribution of sound and dead knots in Picea abies (L.) Karst. Holz Roh Werkst 58(1–2):107–114
30. Moberg L (2006) Predicting knot properties of Picea abies and Pinus sylvestris from generic tree descriptors. Scand J For Res 21(S7):49–6210.1080/14004080500487011 ↗
31. Vuorilehto J, Tulokas T (2007) On log rotation precision. For Prod J 57(1/2):91–96
32. Johansson E, Johansson D, Skog J, Fredriksson M (2013) Automated knot detection for high speed computed tomography on Pinus sylvestris L. and Picea abies (L.) Karst. using ellipse fitting in concentric surfaces. Comput Electron Agric 96:238–24510.1016/j.compag.2013.06.003 ↗