journal article·2016-08Open access

Effect of heat treatment on colour changes of black alder and beech veneers

Emilia-Adela Salca, Hikaru Kobori, Tetsuya Inagaki, Yoichi Kojima, Shigehiko Suzuki

Journal of Wood Science· Volume 62· Issue 4

Abstract

In the present study, colour changes in black alder (Alnus glutinosa L. Gaertn.) and beech (Fagus sylvatica L.) wood veneers subjected to heat treatment at 190 °C for different time spans were investigated. The potential of CIELab system and near infrared (NIR) spectroscopy were used to evaluate the colour changes. The changes in colour appeared mostly by the reduction in lightness which is related to the degradation of hemicelluloses during heat treatment in both wood species. It was found that black alder discoloured much more than beech veneers under same treatment conditions. NIR spectra revealed that the dark colour that wood veneers get under heat exposure is due to the chemical decomposition of lignin and hemicelluloses. Heat treatment could, therefore, enhance the use of such veneers for value added products in furniture manufacturing as an alternative to expensive tropical species.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Wood and Agarwood Research · Cultural Heritage Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Kocaefe D, Shi JL, Yang DQ, Bouazara M (2008) Mechanical properties, dimensional stability, and mold resistance of heat-treated jack pine and aspen. For Prod J 58(6):88–93
2. Zivkovic V, Prsa I, Turkulin H, Sinkovic T, Jirou-Rajkovic V (2008) Dimensional stability of heat treated wood floorings. Drvna Industrija 59(2):69–73
3. Bak M, Nemeth R (2012) Changes in swelling properties and moisture uptake rate of oil-heat-treated poplar (Populus × Euramericana CV. Pannonia) wood. Bioresources 7(4):5128–5137
4. Yildiz S, Yildiz UC, Tomak ED (2011) The effects of natural weathering on the properties of heat-treated alder wood. Bioresources 6(3):2504–252110.15376/biores.6.3.2504-2521 ↗
5. Guo F, Huang R, Lu J, Chen Z, Cao Y (2014) Evaluating the effect of heat treating temperature and duration on selected wood properties using comprehensive cluster analysis. J Wood Sci 60:255–26210.1007/s10086-014-1403-5 ↗
6. Unsal O, Ayrilmis N (2005) Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood. J Wood Sci 51:405–40910.1007/s10086-004-0655-x ↗
7. Salca EA, Hiziroglu S (2014) Evaluation of hardness and surface quality of different wood species as function of heat treatment. Mater Des 62:416–42310.1016/j.matdes.2014.05.029 ↗
8. Tuong VM, Li J (2010) Effect of heat treatment on the change in colour and dimensional stability of acacia hybrid wood. Bioresources 5(2):1257–126710.15376/biores.5.2.1257-1267 ↗
9. Nemeth R, Ott A, Takats P, Bak M (2013) The effect of moisture content and drying temperature on the color of two poplars and Robinia wood. Bioresources 8(2):2074–208310.15376/biores.8.2.2074-2083 ↗
10. Kubojima Y, Okano T, Ohta M (2000) Bending strength and toughness of heat-treated wood. J Wood Sci 46:8–1510.1007/BF00779547 ↗
11. Korkut S, Hiziroglu S (2009) Effect of heat treatment on mechanical properties of hazelnut wood (Curylus colurna L.). Mater Des 30(5):1853–185810.1016/j.matdes.2008.07.009 ↗
12. Esteves MB, Pereira HM (2009) Wood modification by heat treatment. A review. Bioresources 4(1):370–40410.15376/biores.4.1.Esteves ↗
13. Bobleter O, Binder H (1980) Dynamic hydrothermal degradation of wood. Holzforschung 34:48–5110.1515/hfsg.1980.34.2.48 ↗
14. Hu C, Jiang G, Xiao M, Zhou J, Yi X (2012) Effects of heat treatment on water-soluble extractives and color changes of merbau heartwood. J Wood Sci 58:465–46910.1007/s10086-012-1265-7 ↗
15. Thompson DW, Kozak RA, Evans PD (2005) Thermal modification of color in red alder veneer. 1. Effects of temperature, heating time and wood type. Wood Fiber Sci 37(4):653–661
16. Sandoval-Torres S, Jomaa W, Marc F, Puiggali JR (2010) Causes of color changes in wood during drying. For Stud China 12(4):167–17510.1007/s11632-010-0404-8 ↗
17. Bekhta P, Niemz P (2003) Effect of high temperature on the change in colour, dimensional stability and mechanical properties of spruce wood. Holzforschung 57:539–54610.1515/HF.2003.080 ↗
18. Gonzalez-Pena MM, Hale MDC (2009) Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: colour evolution and colour changes. Holzforschung 63:385–39310.1515/HF.2009.078 ↗
19. Matsuo M, Umemura K, Kawai S (2014) Kinetic analysis of color changes in keyaki (Zelkova serrata) and sugi (Cryptomeria japonica) wood during heat treatment. J Wood Sci 60:12–2010.1007/s10086-013-1369-8 ↗
20. Sundqvist B, Karlsson O, Westermark U (2006) Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Sci Technol 40:549–56110.1007/s00226-006-0071-z ↗
21. Matsuo M, Umemura K, Kawai S (2012) Kinetic analysis of colour changes in cellulose during heat treatment. J Wood Sci 58(2):113–11910.1007/s10086-011-1235-5 ↗
22. Denes L, Lang E (2013) Photodegradation of heat treated hardwood veneers. J Photochem Photobiol B 118:9–1510.1016/j.jphotobiol.2012.09.017 ↗
23. Bekhta P, Proszyk S, Krystofiak T (2014) Colour in short-term thermo-mechanically densified veneer of various wood species. Eur J Wood Wood Prod 72(6):785–79710.1007/s00107-014-0837-1 ↗
24. Murata K, Watanabe Y, Nakano T (2013) Effect of thermal treatment of veneer on formaldehyde emission of poplar plywood. Materials 6:410–42010.3390/ma6020410 ↗
25. Esteves B, Pereira H (2008) Quality assessment of heat treated wood by NIR spectroscopy. Holz Roh Werkst 66(5):323–33210.1007/s00107-008-0262-4 ↗
26. Gonzalez-Pena MM, Hale MDC (2009) Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 2: property prediction from colour changes. Holzforschung 63:394–40110.1515/HF.2009.077 ↗
27. Sandak A, Sandak J, Zborowska M, Pradzynski W (2010) Near infrared spectroscopy as a tool for archaeological wood characterization. J Archaeol Sci 37:2093–210110.1016/j.jas.2010.02.005 ↗
28. Schwanninger M, Rodrigues JC, Fackler K (2011) A review of band assignments in near infrared spectra of wood and wood components. J Near Infrared Spectrosc 19:287–30810.1255/jnirs.955 ↗
29. Todorovic N, Popovic Z, Milic G, Popadic R (2012) Estimation of heat-treated beech wood properties by colour change. Bioresources 7(1):799–81510.15376/biores.7.1.799-815 ↗
30. Tsuchikawa S, Kobori H (2015) A review of recent application of near infrared spectroscopy to wood science and technology. J Wood Sci 61:213–22010.1007/s10086-015-1467-x ↗
31. ISO 7724-2 (1984) Paints and varnishes. Colorimetry. Part 2: colour measurement. International Organization for Standardization, Geneva, p 6
32. McLaren K (1976) The development of the CIE 1976 (L*a*b*) uniform colour-space and colour-difference formula. J Soc Dyers Colour 92:338–34110.1111/j.1478-4408.1976.tb03301.x ↗
33. Gierlinger N, Jacques D, Grabner M, Wimmer R, Schwanninger M, Rozenberg P, Paques LE (2004) Colour of larch heartwood and relationships to extractives and brown-rot decay resistance. Trees 18(1):102–10810.1007/s00468-003-0290-y ↗
34. Yazaki Y, Collins PJ, Mccombe B (1994) Variations in hot water extractives content and density of commercial wood veneers from blackbutt (Eucalyptus pilularis). Holzforschung 48:107–11110.1515/hfsg.1994.48.s1.107 ↗
35. Schwanninger M, Hinterstoisser B, Gierlinger N, Wimmer R, Hanger J (2004) Application of Fourier Transform near infrared spectroscopy (FT-NIR) to thermally modified wood. Holz Roh Werkst 62:483–48510.1007/s00107-004-0520-z ↗
36. Hill C (2006) Wood modification-chemical, thermal and other processes. Wiley Series in renewable resources. Wiley, Chichester10.1002/0470021748 ↗