journal article·2000-06Open access

Fracture of multiply-bolted joints under lateral force perpendicular to wood grain

Motoi Yasumura, Laurent Daudeville

Journal of Wood Science· Volume 46· Issue 3

Abstract

The crack initiation and propagation of multiplybolted joints subjected to lateral forces perpendicular to the grain were analyzed. Two types of bolted joint were subjected to lateral loads perpendicular to the grain. One had joints of two bolts aligned with the wood grain (type H), and the other had joints of two or three bolts aligned perpendicular to the grain (type V). The crack initiation and propagation were analyzed by means of the average stress method (ASM) and linear elastic fracture mechanics (LEFM), respectively. The maximum loads calculated by LEFM agreed comparatively well with the experimental results, and it was proved that the LEFM was an appropriate tool to analyze the fracture of multiply-bolted joints subjected to a force perpendicular to the grain. It was also found that the multiply-bolted joints failed with the fracture of the wood before the joints yielded, and that it caused a considerable decrease of the maximum loads. The reduction of strength should be considered in the design of multiply-bolted joints subjected to lateral forces perpendicular to the grain.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Mechanical Behavior of Composites · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. European Committee for Standardization (1993) Eurocode 5: design of timber structures, part 1–1: general rules and rules for buildings: 72–77
2. Architectural Institute of Japan (1995) Standard for structural design of timber structures (in Japanese): 42–45, 50–54
3. Johansen KW (1949) Theory of timber connections. Int Assoc Bridge Struct Eng 9:249–262
4. Yasumura M, Daudeville L (1996) Fracture analysis of bolted joints under lateral force perpendicular to the grain. Mokuzai Gakkaishi 42:225–233
5. Daudeville L, Davenne L, Yasumura M (1996) Experiment and numerical analysis of failure in bolted joints. In: Proceedings of 1996 IWEC, vol 1, pp 153–159
6. Petersson H (1995) Fracture design analysis of wooden beams with holes and notches. In: Proceedings of CIB-W18 meetings, 28-19-3
7. Daudeville L, Yasumura M (1996) Failure analysis of timber bolted joints by fracture mechanics. Mater Struct 29:418–42510.1007/BF02485992 ↗
8. Yasumura M (1993) Japan overview: design concept and prospect of bolted joints and nailed joints. Presented at the International Workshop on Wood Connectors, Forest Products Society, pp 114–121