journal article·2023-04-01Open access

Interfacial Weakness Criterion by Indentation in 3D Printed Concrete

Maria Taleb, David Bulteel, Damien Betrancourt, Francine Roudet, Sébastien Rémond, Didier Chicot

Abstract

Three-dimensional (3D) printable concrete requires cementitious material that must have suitable but self-contradictory properties to be printable such as fluidity to facilitate pumping along with stiffness and strength to ensure buildability, both having a great influence on the cohesion of the interfacial zone. A pool of characterization tests was developed over the last decades for layered 3D printed structures to quantify and qualify the interfacial region. Although destructive tests are typically selected to capture actual interfacial bonding strength, nondestructive testings were also used. Indentation tests were preferred in this study to locally determine the mechanical properties of the center part of two consecutive layers, the edge of the layer and the interfacial zone. As results, it was found that the previously deposited layer is harder than the upper one. The hardness of the edges of the printed filament can decrease ∼50% over few hundred microns compared to the core of the material. Moreover, this decrease in hardness is also observed at the interface. From the hardness-distance profile measured perpendicularly to the plan of the interface, we propose an interfacial weakness criterion, which has been successfully applied in various conditions of 3D printed concrete elaboration.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · Modular Robots and Swarm Intelligence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Univ. Lille, Institut Mines-Télécom, Univ. Artois, Junia, ULR 4515-LGCgE–Laboratoire de Génie Civil et géoEnvironnement, F-59000 Lille, France.

IMT Lille Douai, Institut Mines-Télécom, Center for Materials and Processes, F-59000 Lille, France.

Univ Orléans, Univ Tours, INSA CVL, LaMé, EA 7494, Orléans, France.

References (38)

Show source-provided references
1. 10.21809/rilemtechlett.2016.1610.21809/rilemtechlett.2016.16 ↗
2. Nematollahi B, , Xia M, , Sanjayan J. Current progress of 3D concrete printing technologies. 34rd International Symposium on Automation and Robotics in Construction (ISARC). Taipei, Taiwan: Proceedings of the 34rd ISARC,, 2017; pp. 260–267. https://doi.org/10.22260/isarc2017/0035
3. 10.1016/j.cemconres.2018.06.00110.1016/j.cemconres.2018.06.001 ↗
4. 10.1007/978-3-319-99519-9_2210.1007/978-3-319-99519-9_22 ↗
5. 10.1016/B978-0-12-815481-6.00006-310.1016/B978-0-12-815481-6.00006-3 ↗
6. 10.1617/s11527-012-9828-z10.1617/s11527-012-9828-z ↗
7. Nerella VN, , Hempel S, , Mechtcherine V. Micro-and macroscopic investigations on the interface between layers of 3D-printed cementitious elements. Chennai, India: 3rd International Conference on Advances in Construction Materials and Systems, 2017.
8. 10.1108/RPJ-09-2016-015410.1108/RPJ-09-2016-0154 ↗
9. 10.1016/j.autcon.2017.08.01910.1016/j.autcon.2017.08.019 ↗
10. 10.1080/17452759.2018.150042010.1080/17452759.2018.1500420 ↗
11. 10.1016/j.cemconres.2019.02.01710.1016/j.cemconres.2019.02.017 ↗
12. 10.1007/BF0247325910.1007/BF02473259 ↗
13. Nerella VN, , Markin V, , Hempel S, et al. Characterizing bond between concrete layers resulting of extrusion-based digital construction. ETH Zürich, Switzerland: 1st International Conference on Concrete and Digital Fabrication (Digital Concrete), 2018.
14. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
15. Marchment T, , Xia M, , Dodd E, et al. Effect of delay time on the mechanical properties of extrusion-based 3D printed concrete. 34rd International Symposium on Automation and Robotics in Construction (ISARC). Taipei, Taiwan: Proceedings of the 34rd ISARC,, 2017; pp. 240–245. https://doi.org/10.22260/ISARC2017/0032
16. 10.1016/j.matlet.2017.07.12310.1016/j.matlet.2017.07.123 ↗
17. 10.1016/j.conbuildmat.2018.03.23210.1016/j.conbuildmat.2018.03.232 ↗
18. 10.1016/j.conbuildmat.2020.11945710.1016/j.conbuildmat.2020.119457 ↗
19. 10.1016/j.conbuildmat.2019.01.23510.1016/j.conbuildmat.2019.01.235 ↗
20. 10.1016/j.cemconres.2019.10578710.1016/j.cemconres.2019.105787 ↗
21. Kruger J, , van Zijl G. A compendious review on lack-of-fusion in digital concrete fabrication. Addit Manuf, 2020; 37:101654.
22. 10.1016/j.cemconres.2021.10638610.1016/j.cemconres.2021.106386 ↗
23. 10.1109/ULTSYM.2001.99183410.1109/ULTSYM.2001.991834 ↗
24. 10.1016/j.conbuildmat.2019.11798210.1016/j.conbuildmat.2019.117982 ↗
25. 10.1016/j.conbuildmat.2017.09.10910.1016/j.conbuildmat.2017.09.109 ↗
26. 10.1016/j.conbuildmat.2021.12322010.1016/j.conbuildmat.2021.123220 ↗
27. NF EN 196-3. Methods of Testing Cement: Part 3. Determination of Setting Time and Soundness. AFNOR Paris France. 2017.
28. 10.1016/j.conbuildmat.2018.12.00210.1016/j.conbuildmat.2018.12.002 ↗
29. Sonebi M. Utilization of micro-indentation technique to determine the micromechanical properties of ITZ in cementitious materials. ACI Session on “Nanotechnology of Concrete: Recent Development and Future Perspectives.” Denver USA: Symposium Paper 2008; vol. 254 pp. 57–68.
30. 10.1016/j.conbuildmat.2017.02.03510.1016/j.conbuildmat.2017.02.035 ↗
31. Grairia S, , Chrait Y, , Montagne A, et al. Interfacial indentation test for the study of reinforcement bar/concrete matrix adhesion in high performance self compacting concretes. J Mater Environ Sci, 2018; 9:189–200.
32. ISO 6507-1. International Standard Metallic materials-Vickers hardness test—Part 1: Test method. The International Organization for Standardization 2018.
33. Sargent PM. Use of the Indentation Size Effect on Microhardness for Materials Characterization. Microindentation Techniques in Materials Science and Engineering, 1986; pp. 160–174. https://doi.org/10.1520/STP32956S
34. 10.1016/S0022-5096(97)00086-010.1016/S0022-5096(97)00086-0 ↗
35. Meyer E. Investigations of hardness testing and hardness. Phys Z, 1908; 9:8.
36. 10.1007/BF0035290810.1007/BF00352908 ↗
37. 10.1080/0950083890820635610.1080/09500838908206356 ↗
38. 10.1002/9781119610755.ch410.1002/9781119610755.ch4 ↗