journal article·2020-12Open access

Estimations of the moisture content above the fiber saturation point in sugi wood using the correlation between the specific dynamic Young’s modulus and tangent loss

Toshiyuki Fukui, Yoshiyuki Yanase, Yutaka Sawada, Yoshihisa Fujii

Journal of Wood Science· Volume 66· Issue 1

Abstract

Abstract A novel method for estimating the wood moisture content above the fiber saturation point (FSP) is proposed, and the method performance is confirmed. Previous studies have highlighted that there is a negative linear correlation between the specific dynamic Young’s modulus (log (E/ρ)) and tangent loss (log (tanδ)) of clear small wood specimens. We confirm that this correlation can be obtained for air-dried commercial lumber from Japanese cedar, or sugi (Cryptomeria japonica), via experimental analysis. The best-fit linear regression line of this correlation only changes by the apparent density above the FSP (i.e., only by the moisture content of the specimen) when E and tanδ are kept constant in this high moisture content range. Here, we derive an equation to calculate the moisture content using log (E/ρ) and log (tanδ) based on the regression line of sugi wood at the FSP. A 45-day drying test was conducted on 23 green lumber specimens, with the E/ρ and tanδ values calculated from the natural resonance frequency fr, the logarithmic decrement λ and dimensions at various drying stages. The estimated moisture contents are in good agreement with the measured values, confirming the performance of proposed moisture content method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Wood Treatment and Properties · Textile materials and evaluations · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Aichholzer A, Schuberth C, Mayer H, Arthaber H (2018) Microwave testing of moist and oven-dry wood to evaluate grain angle, density, moisture content and the dielectric constant of spruce from 8 GHz to 12 GHz. Eur J Wood Prod 76:89–10310.1007/s00107-017-1203-x ↗
2. Lundgren N, Hagman O, Johansson J (2006) Predicting moisture content and density distribution of Scots pine by microwave scanning of sawn timber II: evaluation of models generated on a pixel level. J Wood Sci 52:39–4310.1007/s10086-005-0724-9 ↗
3. Leblon B, Haddadi A, Tsuchikawa S, Burger J, Stirling R, Pirouz Z, Grove K, Nader J, Larocque A (2013) A review of near-infrared spectroscopy for monitoring moisture content and density of solid wood. Forestry Chronicle 89:595–60610.5558/tfc2013-111 ↗
4. Tham VTH, Inagaki T, Tsuchikawa S (2018) A novel combined application of capacitive method and near-infrared spectroscopy for predicting the density and moisture content of solid wood. Wood Sci Technol 52:115–12910.1007/s00226-017-0974-x ↗
5. Watanabe K, Saito Y, Avramidis S, Shida S (2008) Non-destructive measurement of moisture distribution in wood during drying using digital X-ray microscopy. Drying Technol 26:590–59510.1080/07373930801944796 ↗
6. Gerhards CC (1975) Stress wave speed and MOE of sweetgum ranging from 150 to 15 percent MC. For Prod J 25:51–57
7. James WL, Boone RS, Galligan WL (1982) Using speed of sound in wood to monitor drying in a kiln. For Prod J 32:27–34
8. Kodama Y (1992) Velocity and damping of ultrasonic waves in wood with various moisture content. J Soc Mater Sci, Jpn 41:144–147 (in Japanese)10.2472/jsms.41.144 ↗
9. Sobue N (1993) Simulation study on stress wave velocity in wood above fiber saturation point. Mokuzai Gakkaishi 39:271–276 (in Japanese)
10. Guan H, Nishino Y, Tanaka C (2002) Sound velocity in the fiber direction of douglas fir wood in the moisture content region above the fiber saturation point. Mokuzai Gakkaishi 48:1–6 (in Japanese)
11. Guan H, Nishino Y, Tanaka C (2002) Estimation of moisture content in sugi wood with sound velocity during the natural drying process. Mokuzai Gakkaishi 48:225–232 (in Japanese)
12. Toyoshima I, Yamasaki M, Sasaki Y (2016) Estimating the moisture content of lumber above the fiber saturation point using stress wave velocity during the natural drying process. For Prod J 66:453–460
13. Guan H, Nishino Y, Tanaka C (2000) Longitudinal natural frequency of wood bar with the free water distribution in the length direction. Mokuzai Gakkaishi 46:275–281 (in Japanese)
14. Guan H, Nishino Y, Tanaka C (2001) Longitudinal natural frequencies of softwood logs in the natural drying process. Mokuzai Gakkaishi 47:405–411 (in Japanese)
15. Aratake S, Arima T, Sakoda T (1994) Estimation of moisture content of lumber and logs using higher natural frequency of longitudinal vibrations. Mokuzai Gakkaishi 49:474–480 (in Japanese)
16. Kamaguchi A, Nakao T, Kodama Y (2000) Non-destructive measurement of heartwood moisture content in sugi (Cryptomeria Japonica D. Don) standing tree by lateral impact vibration method. Mokuzai Gakkaishi 46:13–19 (in Japanese)
17. Kamaguchi A, Nakao T, Nakai T, Tamura A (2001) Measurement of heartwood moisture content of sugi by lateral impact vibration method. Mokuzai Gakkaishi 47:235–241 (in Japanese)
18. Iki T, Tamura A, Iizuka K (2010) The non-destructive evaluation of green moisture content in todomatsu (Abies sachalinensis) using a lateral vibration method. Mokuzai Gakkaishi 56:33–40 (in Japanese)10.2488/jwrs.56.33 ↗
19. Tsutsumi H, Oribe S, Haga H, Fujimoto T (2017) Nondestructive evaluation of wood properties in standing trees using vibration spectra. Mokuzai Gakkaishi 63:291–296 (in Japanese)10.2488/jwrs.63.291 ↗
20. Norimoto M (1982) Structure and properties of wood used for musical instruments I. on the selection of wood used for piano soundboards. Mokuzai Gakkaishi 28:407–413 (in Japanese)
21. Ono T (1983) Effect of grain angle on dynamic mechanical properties of wood. J Soc Mater Sci 32:108–113 (in Japanese)10.2472/jsms.32.108 ↗
22. Ono T, Norimoto M (1983) Study on Young’s modulus and internal friction of wood in relation to the evaluation of wood for musical instruments. Jpn J Appl Phys 22:611–61410.1143/JJAP.22.611 ↗
23. Ono T, Norimoto M (1984) On physical criteria for the selection of wood for soundboards of musical instruments. Rheol Acta 23:652–65610.1007/BF01438805 ↗
24. Ono T, Norimoto M (1985) Anisotropy of dynamic Young’s modulus and internal friction in wood. Jpn J Appl Phys 24:960–96410.1143/JJAP.24.960 ↗
25. Norimoto M, Tanaka F, Ohogama T, Ikimune R (1986) Specific dynamic Young’s modulus and internal friction of wood in the longitudinal direction. Wood Res Technol 22:53–65 (in Japanese)
26. Sasaki T, Norimoto M, Yamada T, Rowell RM (1988) Effect of moisture on the acoustical properties of wood. Mokuzai Gakkaishi 34:794–803 (in Japanese)
27. Yano H, Oonishi K, Mukudai J (1990) Acoustic properties of wood for top plate of guitar. J Soc Mater Sci 39:23–28 (in Japanese)10.2472/jsms.39.1207 ↗
28. Yano H, Matsuoka I, Mukudai J (1992) Acoustic properties of wood for violins. Mokuzai Gakkaishi 38:122–127 (in Japanese)
29. Yano H, Yamada T, Minato K (1986) Changes in acoustical properties of sitka spruce due to reaction with formaldehyde. Mokuzai Gakkaishi 32:984–989 (in Japanese)
30. Akitsu H, Norimoto M, Morooka T (1991) Vibrational properties of chemically modified wood. Mokuzai Gakkaishi 37:590–597 (in Japanese)
31. Yano H, Minato K (1992) Improvement of the acoustic and hygroscopic properties of wood by a chemical treatment and application to the violin parts. J Acoust Soc Am 92:1222–122710.1121/1.403972 ↗
32. Akitsu H, Norimoto M, Morooka T, Rowell RM (1993) Effect of humidity on vibrational properties of chemically modified wood. Wood Fiber Sci 25:250–260
33. Yano H (1994) The changes in the acoustic properties of western red cedar due to methanol extraction. Holzforschung 48:491–49510.1515/hfsg.1994.48.6.491 ↗
34. Sugiyama M, Matsunaga M, Minato K, Norimoto M (1994) Physical and mechanical properties of pernambuco (Guilandina echinata Spreng) used for violin bows. Mokuzai Gakkaishi 40:905–910 (in Japanese)
35. Ahang T, Bai S, Bardet S, Almeras T, Thibaut B, Beuchene J (2011) Radial variations of vibrational properties of three tropical woods. J Wood Sci 57:377–38610.1007/s10086-011-1189-7 ↗
36. Bremaud I, Amusant N, Minato K, Grill J, Thibaut B (2011) Effect of extractives on vibrational properties of African padauk (Pterocarpus soyauxii Thab.). Wood Sci Technol 45:461–47210.1007/s00226-010-0337-3 ↗
37. Kollmann F, Krech H (1960) Dynamic measurement of damping capacity and elastic properties of wood. Holz Roh Werk 18:41–5410.1007/BF02615616 ↗
38. Suzuki S (1980) Relationship between specific gravity and decrement of dynamic Young’s modulus with water. Mokuzai Gakkaishi 26:299–304 (in Japanese)
39. Ono T, Kataoka A (1979) The frequency dependence of the dynamic Young’s modulus and internal friction of wood used for the soundboards of musical instruments II. the dependence of the Young’s modulus and internal friction on frequency, and the mechanical frequency dispersion. Mokuzai Gakkaishi 25:535–542 (in Japanese)
40. Tonosaki M, Okano T, Asao I (1983) Vibrational properties of sitka spruce with longitudinal vibration and flexural vibration. Mokuzai Gakkaishi 29:547–552 (in Japanese)
41. McDonald KA, Bendtsen BA (1986) Measuring localized slope of grain by electrical capacitance. For Prod J 36:75–78
42. Hirakawa Y, Fujisawa Y (1995) The relationships between microfibril angles of the S2 layer and latewood tracheid lengths in elite sugi tree (cryptomeria japonica) clones. Mokuzai Gakkaishi 41:123–131 (in Japanese)
43. Hirakawa Y, Yamashita K, Nakada R, Fujisawa Y (1997) The effects of S2 microfibril angles of latewood tracheids and densities on modulus of elasticity variations of sugi tree (Cryptomeria japonica) logs. Mokuzai Gakkaishi 43:717–724 (in Japanese)