Simulation of induction hardening: Simulative sensitivity analysis with respect to material parameters and the surface layer state
Source abstract
Abstract
Abstract Inductive surface hardening is a widely used steel heat treatment process improving wear and contact resistance and inducing compressive residual stresses close to the surface. To achieve the optimal state the interaction of many process parameters and their influence on the final part properties have to be worked out. This can be accomplished by experimental or simulative investigations. Here a simulative consideration of the process allows an investigation of a big parameter field and has the advantage of predictions compared to experiments. One disadvantage of a simulative consideration is that all relevant material properties of the regarded steel have to be determined with huge experimental effort. This work will provide models and estimations to calculate the necessary phase dependent material properties for a wide range of low-alloyed steels. The acquisition is based on a literature study. Furthermore the influence of each material parameter on the surface state after a typical induction hardening process, regarding residual stresses and the hardening depth, is analysed. The sensitivity analysis is performed using a multiphysical finite element (FE) model of a ring shaped sample out of AISI4140, including over 120 simulations. With the presented results an improved understanding of the interactions during the induction hardening process is achieved and important material parameters, which have a significant influence on the resulting surface layer state, are elaborated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloys Composites Properties · Induction Heating and Inverter Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Experimental investigation and finite-element modeling of the short-time inductive quench-and-temper process
2. M. Schwenk, Kaufmann B., J. Hoffmeister, V. Schulze, Residual stress prediction for dual frequency induction hardening considering transformation plasticity during austenitization, in: Quenching control and distortion: Proceedings of the 6th International Quenching and Control of Distortion Conference including the 4th International Distortion Engineering Conference, pp. 45–56.
3. Computer simulation of induction hardening10.1016/j.jmatprotec.2004.09.017 ↗
4. D. Hoemberg, T. Petzold, E. Rocca, nalysis and simulations of multifrequency induction hardening.
5. Simulation of multi-frequency-induction-hardening including phase transitions and mechanical effects10.1016/j.finel.2016.07.012 ↗
6. Entwicklung und Validierung eines numerischen Simulationsmodells zur Beschreibung der induktiven Ein- und Zweifrequenzrandschichthärtung am Beispiel von vergütetem 42CrMo4
7. A sensitivity analysis of the heat treatmentof steel
8. Sensitivity analysis of the thermomechanical response of welded joints10.1016/S0020-7683(03)00223-3 ↗
9. Sensitivity of material properties on distortion and residual stresses during metal quenching processes10.1016/j.jmatprotec.2009.09.001 ↗
10. Richter · 1983
11. Effects of alloying element on supercooled a_3 transformation of iron
12. Martensite formation in partially and fully austenitic plain carbon steels10.1007/s11661-009-9796-2 ↗
13. U. Ahrens, Beanspruchungsabhängiges Umwandlungsverhalten und Umwandlungsplastizität niedrig legierter Stähle mit unterschiedlich hohen Kohlenstoffgehalten. Dissertation, Universität Paderborn, Paderborn, 2003.
14. Methoden und Strategein zur Simulation der Wärmebehandlung komplexer Bauteile aus 20MnCr5
15. Ermittlung der materialdaten zur simulation des durchhärtens von komponenten aus 100cr6: Teil 1
16. Müstak · 2014
17. M. Hunkel, D.S. Schicchi (Eds.), Modeling of Bainitic Transformations Under High Stresses, (Bremen), 2017.
18. Description of short time phase transformation during the heating of steels based on high-rate experimental data
19. Austenitization kinetics of pearlite and ferrite aggregates in a low carbon steel containing 0.15 wt pct c10.1007/BF02648541 ↗
20. Modelling of kinetics of austenite formation in steels with different initial microstructures10.2355/isijinternational.41.1093 ↗
21. J.G. Back, Modelling and Characterisation of the Martensite Formation in Low Alloyed Carbon Steels. Dissertation, Lulea University of Technology, Lulea, 2017.
22. Bainite and martensite start temperature calculated with exponential carbon dependence10.1179/1743284711Y.0000000097 ↗
23. An implicit algorithm to verify creep and trip behavior of steel using uniaxial experiments10.1002/zamm.201100083 ↗
24. Iron and its dilute substitutional solid solutions
25. Effect of alloying additions on the lattice parameter of austenite
26. Mathematical modelling of transformation plasticity in steels i: Case of ideal-plastic phases10.1016/0749-6419(89)90001-6 ↗
27. The deformation of metals under small stresses during phase transformations
28. Experimentally validated residual stresses and distortion prediction for dual frequency induction hardening10.3233/JAE-141752 ↗
29. Evaluation of transformation latent heat in c-mn steels10.2355/isijinternational.39.281 ↗