Ab initio study of hydrogen diffusion in Be and Be12Ti for fusion applications
Source abstract
Abstract
Abstract Beryllium and Be12Ti are considered as neutron multiplier materials in various tritium breeding blanket designs for future fusion reactors. Tritium and helium are formed due to neutron-induced nuclear transmutation and accumulated in beryllium-based materials. As a β-radioactive isotope, tritium represents additional safety concern with respect to sudden release during operation or hindering consequent recycling. Therefore, detailed study of its accumulation and release is indispensable. In particular, it is important to reveal which process controls tritium release: binding of tritium with traps or diffusion out of material bulk. Ab initio calculations of solution energies at all non-equivalent hydrogen interstitial sites confirm easier dissolution of tritium in Be12Ti in comparison with pure beryllium. The 17 considered diffusion barriers between adjacent hydrogen interstitial sites are calculated using a dimer method instead of a computationally more expensive nudged elastic band approach. Three possible diffusion paths in Be12Ti were revealed: two of them along the c-axis and another one along the a- and b-axes. Considering calculated hydrogen diffusion barriers in Be12Ti, one can conclude that at low hydrogen concentrations and low temperatures, diffusion occurs preferentially along the c-axis. The rate limiting diffusion barriers in Be12Ti are found to be in the range of 0.4–0.5 eV, which are comparable to 0.42 eV in pure beryllium suggesting that tritium diffusion in both materials proceeds at comparable rates. Therefore, binding of tritium atoms with vacancies and other lattice imperfections are expected to play a crucial role in tritium retention.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Muon and positron interactions and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Current status of beryllium materials for fusion blanket applications10.13182/FST13-776 ↗
2. Evolution of beryllium microstructure under high-dose neutron irradiation10.1016/S0022-3115(02)01184-4 ↗
3. Hydrogen bubbles in metals10.1016/0022-3115(93)90244-S ↗
4. Helium gas bubble lattices in face-centerd-cubic metals10.1038/276595a0 ↗
5. Gas-bubble superlattice formation in bcc metals10.1016/0022-3115(94)00674-1 ↗
6. A temperature threshold for gas-bubble superlattice formation in molybdenum10.1016/S0022-3115(97)00298-5 ↗
7. Microstructural and tritium release examination of titanium beryllides10.1016/j.jnucmat.2010.12.142 ↗
8. Tritium and helium release from highly neutron irradiated titanium beryllide10.1016/j.fusengdes.2015.01.038 ↗
9. Hydrogen retention behavior of beryllides as advanced neutron multipliers10.1016/j.nme.2016.03.001 ↗
10. Synthesis and reactivity of single-phase Be17Ti2 intermetallic compounds10.1016/j.fusengdes.2015.10.034 ↗
11. Reactivity and deuterium retention properties of titanium-beryllium intermetallic compounds10.1016/j.intermet.2016.11.005 ↗
12. Reactivity of plasma-sintered beryllium-titanium intermetallic compounds with water vapor
13. Effect of titanium content on mechanical properties and reactivity of titanium beryllide pebbles10.1016/j.fusengdes.2015.06.170 ↗
14. Reactivity with water vapor and hydrogen storage capacity of Be2Ti compound10.1016/j.ijhydene.2016.02.131 ↗
15. Comparative study of fusion relevant properties of Be12V and Be12Ti10.1016/j.fusengdes.2010.12.065 ↗
16. Characteristics of microstructure, swelling and mechanical behaviour of titanium beryllide samples after high-dose neutron irradiation at 740 and 873 K10.1016/j.fusengdes.2013.05.084 ↗
17. Mechanical behavior of Be-Ti pebbles at blanket relevant temperatures10.1016/j.fusengdes.2016.02.003 ↗
18. Fabrication and hydrogen generation reaction with water vapor of prototypic pebbles of binary beryllides as advanced neutron multiplier10.1016/j.fusengdes.2015.04.026 ↗
19. Prevention of hydrogen generation reaction with water vapor by surface modification of beryllides as advanced neutron multipliers10.1016/j.fusengdes.2017.01.033 ↗
20. Beryllide pebble fabrication of Be-Zr compositions as advanced neutron multipliers10.1016/j.fusengdes.2015.10.018 ↗
21. Ab initio study of Be and Be12Ti for fusion applications10.1016/j.intermet.2018.06.009 ↗
22. Retention and diffusion of transmutation H and He atoms in Be12Ti: first-principles calculations10.1039/C8RA06768F ↗
23. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
24. Abinitio molecular-dynamics for liquid-metals10.1103/PhysRevB.47.558 ↗
25. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
26. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
27. Accurate and simple analytic representation of the electron-gas correlation-energy10.1103/PhysRevB.45.13244 ↗
28. Jmol: an open-source Java viewer for chemical structures in 3D. Available at: http://www.jmol.org/.
29. Hannes Jónsson, Greg Mills, K.W. Jacobsen, Nudged elastic band method for finding minimum energy paths of transitions, Classical and Quantum Dynamics in Condensed Phase Simulations, World Scientific Publishing Company, Singapore, 1998, pp. 385-404.10.1142/9789812839664_0016 ↗
30. Reversible work transition-state theory – application to dissociative adsorption of hydrogen10.1016/0039-6028(94)00731-4 ↗
31. Ab initio static and molecular dynamics studies of helium behavior in beryllium10.1016/j.jnucmat.2013.04.041 ↗
32. First-principles study of migration and diffusion mechanisms of helium in α-Be10.1063/1.4944950 ↗
33. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
34. Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points10.1063/1.1323224 ↗
35. A generalized solid-state nudged elastic band method10.1063/1.3684549 ↗
36. A dimer method for finding saddle points on high dimensional potential surfaces using only first derivatives10.1063/1.480097 ↗
37. Superlinearly converging dimer method for transition state search
38. Solid-state dimer method for calculating solid-solid phase transitions10.1063/1.4873437 ↗
39. VTST tools. The dimer method: https://theory.cm.utexas.edu/vtsttools/dimer.html.
40. Pymatgen (Python Materials Genomics) open source analysis code: https://pymatgen.org/.
41. Vacancies, interstitials and gas atoms in beryllium10.1016/j.jnucmat.2008.12.063 ↗