journal article·2019-12

Influence of melt convection on the morphological evolution of seaweed structures: Insights from phase-field simulations

V. Pavan Laxmipathy, Fei Wang, Michael Selzer, Britta Nestler, Kumar Ankit

Publisher page

Abstract

Abstract In the present study, the morphological evolution of instabilities in a binary polycrystalline alloy is investigated under the influence of melt convection through phase-field simulations. In the absence of interfacial anisotropy, a grain boundary initiates and amplifies a convex ridge, which sequentially undergoes splitting and generates a random fork like pattern in a supersaturated melt, namely seaweed. Categorized as regimes I and II, degenerate and strongly tilted seaweeds are the two distinguishable structures observed at low and high flow velocities, respectively. In the presence of weak convection fields, the solidification of individual crystallites is driven by the proportional and sideward amplification of the tips across the domain. In regime II, the combined influence of convection and solutal gradients at the grain boundary strikingly generates an oriented pattern. The role of surface energies on the development of perturbations across the two solid grains is studied via comparing the microstructures. For different velocities, we observe that the growth of tip splitting branches along a solidifying interface is restricted with the decrease in the grain boundary energy and the relative grain boundary groove angle. Furthermore, a quantitative image analysis is performed for all the microstructures to study the relation between the local orientation and the liquid phase convection. Symmetric and skewed nature of the distributions demonstrate the preferred local tilt angles for the structures in regimes I and II, respectively. Besides, a power law for the tip splitting frequency f ∝ Re - 0.02 is also established. This relation is consistent with seaweed morphologies, attributed by frequent and inhibited splitting events at various Reynolds numbers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Fluid Dynamics and Thin Films · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. The redistribution of solute atoms during the solidification of metals10.1016/0001-6160(53)90126-6 ↗
2. Glicksman · 2010
3. Stability of a planar interface during solidification of a dilute binary alloy10.1063/1.1713333 ↗
4. In situ and real-time observation of the formation and dynamics of a cellular interface in a Succinonitrile-0.5 wt% Acetone alloy directionally solidified in a cylinder10.1016/S0022-0248(97)00274-1 ↗
5. Morphological evolution of the solid-liquid interface near grain boundaries during directional solidification10.1007/s11433-011-4494-7 ↗
6. Initiation of dendrites by crystal imperfections10.1007/BF02642797 ↗
7. Noël · J. Cryst. Growth · 1998 · 187 · 51610.1016/S0022-0248(97)00882-8 ↗
8. Free growth and instability morphologies in directional melting of alloys10.1103/PhysRevE.65.051604 ↗
9. Growth direction of columnar crystals solidified in flowing melt10.1016/0001-6160(84)90030-0 ↗
10. Theory of thermal grooving10.1063/1.1722742 ↗
11. Morphological stability near a grain boundary groove in a solid-liquid interface during solidification of a binary alloy10.1016/0022-0248(73)90052-3 ↗
12. Measurement and analysis of grain boundary grooving by volume diffusion10.1016/0022-0248(91)90061-9 ↗
13. The development of cells during the solidification of a dilute Pb-Sn alloy10.1016/0022-0248(69)90038-4 ↗
14. Tip splitting without interfacial tension and dendritic growth patterns
15. Formation of a dense branching morphology in interfacial growth10.1103/PhysRevLett.57.1903 ↗
16. Alternating tip splitting in directional solidification10.1103/PhysRevLett.86.4604 ↗
17. Dynamics of low anisotropy morphologies in directional solidification10.1103/PhysRevE.66.051604 ↗
18. Double dendrite growth in solidification10.1103/PhysRevE.72.011601 ↗
19. Fractal and compact growth morphologies in phase transitions with diffusion transport10.1103/PhysRevE.49.2972 ↗
20. Symmetry-broken double fingers and seaweed patterns in thin-film directional solidification of a nonfaceted cubic crystal10.1103/PhysRevE.51.4751 ↗
21. Tip-splitting instability and transition to seaweed growth during alloy solidification in anisotropically preferred growth direction10.1016/j.actamat.2013.11.069 ↗
22. Dendritic growth morphologies in Al-Zn alloys – part II: Phase-field computations10.1007/s11661-013-1911-8 ↗
23. Modeling melt convection in phase-field simulations of solidification10.1006/jcph.1999.6323 ↗
24. Three-dimensional phase-field simulations of the effect of convection on free dendritic growth10.1016/j.jcrysgro.2005.03.063 ↗
25. Phase-field simulations of dendritic crystal growth in a forced flow10.1103/PhysRevE.63.061601 ↗
26. Adaptive phase field simulation of dendritic crystal growth in a forced flow: 2D vs 3D morphologies10.1016/j.ijheatmasstransfer.2008.09.014 ↗
27. Phase field model for three-dimensional dendritic growth with fluid flow10.1103/PhysRevE.64.041602 ↗
28. Dendritic solidification under natural and forced convection in binary alloys: 2D versus 3D simulation10.1088/0965-0393/18/5/055008 ↗
29. Surface rippling during solidification of binary polycrystalline alloy: insights from 3-D phase-field simulations10.1016/j.jcrysgro.2016.05.033 ↗
30. Phase-field study of the pattern formation in Al-Ag-Cu under the influence of the melt concentration10.1016/j.commatsci.2016.04.025 ↗
31. Influence of growth velocity variations on the pattern formation during the directional solidification of ternary eutectic Al-Ag-Cu10.1016/j.actamat.2017.07.007 ↗
32. Theoretical and numerical study of lamellar eutectoid growth influenced by volume diffusion10.1016/j.actamat.2013.03.050 ↗
33. Deviations from cooperative growth mode during eutectoid transformation: Insights from a phase-field approach10.1016/j.actamat.2014.08.015 ↗
34. Phase-field simulations of spiral growth during directional ternary eutectic solidification10.1016/j.actamat.2015.12.052 ↗
35. Composition pathway in Fe-Cu-Ni alloy during coarsening10.1088/0965-0393/21/7/075012 ↗
36. Phase-field analysis of volume-diffusion controlled shape-instabilities in metallic systems-II: Finite 3-dimensional rods10.1016/j.commatsci.2017.12.046 ↗
37. Phase-field simulations of pearlitic divergence in Fe-C-Mn steels10.1016/j.actamat.2018.02.059 ↗
38. Numerical and experimental investigations on the growth of the intermetallic Mg2Si phase in Mg infiltrated Si-foams10.1002/adem.201700063 ↗
39. Grand-potential formulation for multicomponent phase transformations combined with thin-interface asymptotics of the double-obstacle potential10.1103/PhysRevE.85.021602 ↗
40. Phase-field model for solidification of a monotectic alloy with convection10.1016/S0167-2789(00)00035-X ↗
41. Solutal convection induced macrosegregation and the dendrite to composite transition in off-eutectic alloys10.1007/BF02655205 ↗
42. Solidification microstructures: recent developments, future directions10.1016/S1359-6454(99)00287-6 ↗
43. Multicomponent alloy solidification: phase-field modeling and simulations10.1103/PhysRevE.71.041609 ↗
44. A quantitative and thermodynamically consistent phase-field interpolation function for multi-phase systems10.1016/j.actamat.2010.10.038 ↗
45. A method for coupling the phase-field model based on a grand-potential formalism to thermodynamic databases10.1016/j.cossms.2015.03.003 ↗
46. Degenerate seaweed to tilted dendrite transition and their growth dynamics in directional solidification of non-axially oriented crystals: a phase-field study10.1038/srep26625 ↗
47. Seaweed to dendrite transition in directional solidification10.1103/PhysRevLett.91.155502 ↗
48. Calibration of a multi-phase field model with quantitative angle measurement10.1007/s10853-015-9542-7 ↗
49. Fluctuations in solidification10.1103/PhysRevE.48.3441 ↗
50. Phase-field model of dendritic sidebranching with thermal noise10.1103/PhysRevE.60.3614 ↗
51. A convenient method for generating normal variables10.1137/1006063 ↗
52. Selzer · 2014
53. Griebel · 1998
54. Schlichting · 2016
55. Experiments on the flow past a circular cylinder at low Reynolds numbers10.1017/S0022112059000829 ↗
56. Parallel computing for phase-field models10.1177/1094342013490972 ↗
57. Solidification of multicrystalline Silicon simulation of micro-structures10.1016/j.jcrysgro.2013.01.044 ↗
58. Phase field modeling of morphological instability near grain boundary during directional solidification of a binary alloy: The hump formation10.1016/j.jcrysgro.2011.04.008 ↗
59. Dendrite fragmentation in alloy solidification due to sidearm pinch-off10.1103/PhysRevE.92.060401 ↗
60. Kinetic phase diagram and scaling relations for stationary diffusional growth10.1209/0295-5075/17/6/010 ↗
61. Capillary-mediated interface perturbations: deterministic pattern formation10.1016/j.jcrysgro.2016.03.031 ↗
62. Solidification structure of monotectic alloys10.1016/0921-5093(91)90271-N ↗
63. Noël · J. Cryst. Growth · 1997 · 181 · 11710.1016/S0022-0248(97)00274-1 ↗
64. Cellular and dendritic growth. II10.1016/0022-0248(74)90127-4 ↗
65. Cellular interface morphologies in directional solidification. II. The effect of grain boundaries10.1103/PhysRevB.30.3993 ↗
66. Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy10.1007/s10237-011-0325-z ↗
67. Cell patterning with a heptagon acoustic tweezer – application in Neurite guidance10.1039/C4LC00436A ↗
68. Image-based quantification of fiber alignment within electrospun tissue engineering scaffolds is related to mechanical anisotropy
69. Püspöki · 2016
70. Modeling spatio-temporal patterns generated by Bacillus subtilis10.1006/jtbi.1997.0462 ↗