journal article·2020-01

Discrepancies in the mechanical properties of gold nanowires: The importance of potential type and equilibration method

Liam S. Morrissey, Stephen M. Handrigan, Sam Nakhla

Publisher page

Abstract

Abstract Previous research simulating gold nanowires predicts a wide range of elastic moduli and does not agree on the effect of nanowire cross-sectional size on elastic modulus. However, these studies do not use the same potentials, possibly explaining the inconsistencies and relative errors. Many of the previous studies used potentials that were not parameterized for elastic properties or the unique geometry found in nanowires. However, no study has attempted to explain the source of these simulation discrepancies. Therefore, the purpose of this study was to use molecular dynamics to determine the effect of potential type on elastic modulus and to determine whether this may explain the discrepancies in previous studies. Findings indicated that potential type had a significant effect on the predicted elastic modulus during uniaxial tension. The purpose of development and potential specific parameterization significantly affected the accuracy relative to experimental data. Further, those potentials most accurate in predicting elastic properties from simulations of bulk periodic samples were not necessarily the most accurate for nanowires. Therefore, the sources of error in previously reported studies appear to be caused by using an unsuitable potential type that was not verified for the unique geometry of nanowires. The most accurate potentials were those that considered bulk elastic properties, surface energies, and thermal properties. In addition, the study tested the effect of temperature and demonstrated significant softening of the modulus with increased temperature, as observed in previous studies. Finally, the study also considered two temperature equilibration methods (the NPT barostat and the NVT thermostat) and demonstrated that for small cross-section nanowires (less than 4 nm) the NVT thermostat resulted in large initial stresses that could affect predicted values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Surface and Thin Film Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Mechanical properties of ultrahigh-strength gold nanowires10.1038/nmat1403 ↗
2. Surface tension effect on the mechanical properties of nanomaterials measured by atomic force microscopy10.1103/PhysRevB.69.165410 ↗
3. Crystal structure dependence of the elastic constants of gold nanorods10.1039/b607364f ↗
4. On the elastic modulus of metallic nanowires10.1021/nl801526c ↗
5. Molecular dynamics simulations of stretched gold nanowires: the relative utility of different semiempirical potentials10.1063/1.2717162 ↗
6. The strength of gold nanowires10.1021/nl048456s ↗
7. Molecular dynamics simulation of size and strain rate dependent mechanical response of FCC metallic nanowires10.1088/0957-4484/17/14/018 ↗
8. Molecular dynamics simulation on the tensile behavior of gold nanowires with diameters between 3 and 6 nm
9. Transverse resonant properties of strained gold nanowires10.1063/1.3460127 ↗
10. Atomistic simulation of the structure and elastic properties of gold nanowires10.1016/j.jmps.2004.03.009 ↗
11. Molecular dynamics simulation of the uniaxial tensile test of silicon nanowires using the MEAM potential10.1016/j.mechmat.2019.103140 ↗
12. Computational aspects of many-body potentials10.1557/mrs.2012.96 ↗
13. Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
14. Second nearest-neighbor modified embedded atom method potentials for bcc transition metals10.1103/PhysRevB.64.184102 ↗
15. ReaxFF: a reactive force field for hydrocarbons10.1021/jp004368u ↗
16. Zhan · 2013
17. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
18. S.J. Plimpton, Large-scale atomistic/molecular massively parallel simulator (LAMMPS) website, 2018.
19. Tensile testing of Fe and FeCr nanowires using molecular dynamics simulations10.1063/1.4905314 ↗
20. Considerations for choosing and using force fields and interatomic potentials in materials science and engineering10.1016/j.cossms.2013.10.001 ↗
21. Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys10.1103/PhysRevB.33.7983 ↗
22. Modified embedded-atom potentials for cubic materials and impurities10.1103/PhysRevB.46.2727 ↗
23. Reactive forcefield for simulating gold surfaces and nanoparticles10.1103/PhysRevB.81.235404 ↗
24. Continuum interpretation of virial stress in molecular simulations10.1016/j.ijsolstr.2008.03.016 ↗
25. Mechanics of silicon nanowires: size-dependent elasticity from first principles10.1080/08927020701730435 ↗
26. Molecular dynamics study on temperature and strain rate dependences of mechanical tensile properties of ultrathin nickel nanowires10.1016/S1003-6326(13)62875-7 ↗
27. Molecular dynamics simulation of a solid platinum nanowire under uniaxial tensile strain: temperature and strain-rate effects10.1103/PhysRevB.72.085414 ↗
28. S. Saha, S. Mojumder, M. Mahboob, Z. Islam, Effect of Temperature and Geometric Parameters on Elastic Properties of Tungsten nanowire: A Molecular Dynamics Study. Vol. 1754, 2015.10.1063/1.4958353 ↗
29. Chawla · 1999