journal article·2020-02

A meshless multiscale approach to modeling severe plastic deformation of metals: Application to ECAE of pure copper

Siddhant Kumar, Abbas D. Tutcuoglu, Y. Hollenweger, D.M. Kochmann

Publisher page

Abstract

Abstract Severe plastic deformation (SPD), occurring ubiquitously across metal forming processes, has been utilized to significantly improve bulk material properties such as the strength of metals. The latter is achieved by ultra-fine grain refinement at the polycrystalline mesoscale via the application of large plastic strains on the macroscale. We here present a multiscale framework that aims at efficiently modeling SPD processes while effectively capturing the underlying physics across all relevant scales. At the level of the macroscale boundary value problem, an enhanced maximum-entropy (max-ent) meshless method is employed. Compared to finite elements and other meshless techniques, this method offers a stabilized finite-strain updated-Lagrangian setting for improved robustness with respect to mesh distortion arising from large plastic strains. At each material point on the macroscale, we describe the polycrystalline material response via a Taylor model at the mesoscale, which captures discontinuous dynamic recrystallization through the nucleation and growth/shrinkage of grains. Each grain, in turn, is modeled by a finite-strain crystal plasticity model at the microscale. We focus on equal-channel angular extrusion (ECAE) of polycrystalline pure copper as an application, in which severe strains are generated by extruding the specimen around a 90 ° -corner. Our framework describes not only the evolution of strain and stress distributions during the process but also grain refinement and texture evolution, while offering a computationally feasible treatment of the macroscale mechanical boundary value problem. Though we here focus on ECAE of copper, the numerical setup is sufficiently general for other applications including SPD and thermo-mechanical processes (e.g., rolling, high-pressure torsion, etc.) as well as other materials systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Application of crystal plasticity theory for mechanically processed BSCCO superconductors10.1016/0167-6636(93)90018-M ↗
2. Finite element modeling and mechanical properties of aluminum proceed by equal channel angular pressing process
3. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
4. Local maximum-entropy approximation schemes: a seamless bridge between finite elements and meshfree methods10.1002/nme.1534 ↗
5. Overview no. 42 Texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
6. Micromechanics of crystals and polycrystals
7. A unified stability analysis of meshless particle methods10.1002/1097-0207(20000730)48:9<1359::AID-NME829>3.0.CO;2-U ↗
8. Meshless methods: an overview and recent developments10.1016/S0045-7825(96)01078-X ↗
9. Element-free Galerkin methods10.1002/nme.1620370205 ↗
10. Texture evolution in equal-channel angular extrusion10.1016/j.pmatsci.2009.01.001 ↗
11. Effect of initial grain size on dynamic recrystallization of copper10.1179/030634583790420448 ↗
12. Correction and stabilization of smooth particle hydrodynamics methods with applications in metal forming simulations10.1002/(SICI)1097-0207(20000228)47:6<1189::AID-NME830>3.0.CO;2-I ↗
13. Flow phenomena in heavily stressed metals10.1063/1.1710301 ↗
14. On torsion combined with compression10.1063/1.1714987 ↗
15. The effect of hydrostatic pressure on plastic flow under shearing stress10.1063/1.1707772 ↗
16. Bunge · 1982
17. A variational constitutive model for slip-twinning interactions in HCP metals: application to single-and polycrystalline magnesium10.1016/j.ijplas.2015.03.008 ↗
18. Meshfree methods: progress made after 20 years10.1061/(ASCE)EM.1943-7889.0001176 ↗
19. Designing of ECAP parameters based on strain distribution uniformity10.1016/j.pnsc.2012.08.001 ↗
20. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
21. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
22. Modelling of equal channel angular pressing using a mesh-free method10.1007/s10853-012-6296-3 ↗
23. Imposing essential boundary conditions in mesh-free methods10.1016/j.cma.2003.12.019 ↗
24. Frost · 1982
25. Grain refinement in the equal channel angular pressing process: simulations using the crystal plasticity finite element method10.1088/1361-651X/aad46d ↗
26. Deformation behavior study of multi-pass ECAE process for fabrication of ultrafine or nanostructured bulk materials10.1080/10426910500471557 ↗
27. Prediction of stored energy in polycrystalline materials during cyclic loading10.1016/j.ijsolstr.2007.10.009 ↗
28. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
29. Approaches to modeling of recrystallization10.3390/met1010016 ↗
30. A novel pole figure inversion method: specification of the MTEX algorithm10.1107/S0021889808030112 ↗
31. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
32. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials10.1016/1359-6462(96)00107-8 ↗
33. Information theory and statistical mechanics10.1103/PhysRev.106.620 ↗
34. A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory10.1016/j.cma.2016.05.025 ↗
35. Kocks · 2000
36. Enhanced local maximum-entropy approximation for stable meshfree simulations10.1016/j.cma.2018.10.030 ↗
37. Elastic properties of metals and alloys. ii. copper10.1063/1.3253150 ↗
38. A numerical approach to the testing of the fission hypothesis10.1086/112164 ↗
39. FEM analysis of equal channel angular processes10.1081/AMP-120003532 ↗
40. A crystal plasticity smooth-particle hydrodynamics approach and its application to equal-channel angular pressing simulation10.1088/0965-0393/24/8/085011 ↗
41. A combined crystal plasticity and graph-based vertex model of dynamic recrystallization at large deformations10.1088/0965-0393/23/4/045011 ↗
42. Recrystallization and texture evolution during hot rolling of copper, studied by a multiscale model combining crystal plasticity and vertex models10.1088/0965-0393/24/7/075004 ↗
43. Smoothed particle hydrodynamics10.1088/0034-4885/68/8/R01 ↗
44. The cleavage strength of polycrystals
45. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior10.1016/S1359-6454(97)00233-4 ↗
46. Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
47. SPH analysis of ECAP process by using grain refinement model10.2320/matertrans.MD200814 ↗
48. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
49. A simple standard orientation density function: the hyperspherical de la vallée poussin kernel10.1002/1521-3951(199704)200:2<367::AID-PSSB367>3.0.CO;2-I ↗
50. Materials processing by simple shear10.1016/0921-5093(95)09705-8 ↗
51. Direct observation of shear deformation during equal channel angular pressing of pure aluminum10.1016/S1359-6462(99)00188-8 ↗
52. Microstructure evolution in the equal channel angular extrusion process10.1016/j.cma.2004.01.036 ↗
53. Finite element analysis of material flow in equal channel angular pressing10.1016/S1359-6462(00)00645-X ↗
54. Construction of polygonal interpolants: a maximum entropy approach10.1002/nme.1193 ↗
55. A particle method for history-dependent materials10.1016/0045-7825(94)90112-0 ↗
56. Application of a particle-in-cell method to solid mechanics10.1016/0010-4655(94)00170-7 ↗
57. Repetitive corrugation and straightening of sheet metals10.1080/10426914.2014.973600 ↗
58. Smoothed particle hydrodynamics stability analysis10.1006/jcph.1995.1010 ↗
59. Plastic strain in metals
60. High- vs. low-fidelity models for dynamic recrystallization in copper10.1016/j.mtla.2019.100411 ↗
61. Stochastic modeling of discontinuous dynamic recrystallization at finite strains in HCP metals10.1016/j.jmps.2018.09.032 ↗
62. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
63. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
64. Investigation of texture in ECAP materials using neutron diffraction
65. An experimental study of equal channel angular extrusion10.1016/S1359-6462(97)00132-2 ↗
66. An integrated full-field model of concurrent plastic deformation and microstructure evolution: application to 3D simulation of dynamic recrystallization in polycrystalline copper10.1016/j.ijplas.2015.12.010 ↗
67. Finite element simulation of deformation behavior of pure aluminum during equal channel angular pressing10.1016/j.msea.2005.08.134 ↗