journal article·2020-10Open access

Phase-field calculations of sink strength in Al, Ni, and Fe: A detailed study of elastic effects

Gabriel Franck Bouobda Moladje, Ludovic Thuinet, Christophe Domain, Charlotte S. Becquart, Alexandre Legris

Abstract

Abstract The sink strength and bias of edge dislocations, low-angle symmetric tilt grain boundaries (STGBs), and spherical cavities are calculated for Al, Ni and Fe using a phase-field approach in this work. The interactions between point defects (PDs) and sinks are incorporated in the present model. These interactions include an elastic contribution to the total free energy of the system, and the phenomenon of elastodiffusion which is often ignored and consists in the modification of the PD migration energy due the strain field generated by the sink. Specific spatial schemes and new algorithms have been developed and applied to perform the calculations due to the PD diffusion which becomes anisotropic and spatial dependent when elastodiffusion is taken into account. The results obtained show that the solution of Rauh and Simon systematically underestimates the sink strength of edge dislocations, especially for dumbells in Ni and Fe. STGBs with low misorientation angle and high density are biased sinks when elasticity (with and without elastodiffusion) is taken into account. It is also shown that taking into account the PD anisotropy at saddle point when the elastodiffusion is considered leads to a significant bias (>10%) of the cavity, which thus highlights the importance of the PD anisotropy at saddle point on the sink strength and bias calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. A TEM study of neutron-irradiated iron10.1016/0022-3115(82)90490-1 ↗
2. Microstructure modelling of ferritic alloys under high flux 1 MeV electron irradiations10.1016/S0022-3115(02)00776-6 ↗
3. Computer simulations of interstitial loop growth kinetics in irradiated bcc Fe10.1016/j.jnucmat.2012.05.004 ↗
4. G.S. Was, Fundamentals of Radiation Materials, Springer.
5. A critical test of the classical rate theory for void swelling10.1016/j.jnucmat.2004.01.026 ↗
6. The rate theory of swelling due to void growth in irradiated metals10.1016/0022-3115(72)90091-8 ↗
7. Steady-state irradiation creep10.1080/14786437408226592 ↗
8. On the estimation of sink-absorption terms in reaction-rate-theory analysis of radiation damage10.1016/0022-3115(78)90026-0 ↗
9. On the diffusion process of point defects in the stress field of edge dislocations10.1002/pssa.2210460213 ↗
10. Object kinetic Monte Carlo study of sink strengths10.1016/j.jnucmat.2006.10.002 ↗
11. Sink strength calculations of dislocations and loops using OKMC10.1016/j.jnucmat.2013.08.052 ↗
12. Effect of saddle point anisotropy of point defects on their absorption by dislocations and cavities10.1016/j.actamat.2017.07.013 ↗
13. Elastic modeling of point-defects and their interaction10.1016/j.commatsci.2018.01.053 ↗
14. Quantitative phase field model for dislocation sink strength calculations10.1016/j.commatsci.2014.02.011 ↗
15. Influence of shape anisotropy of self-interstitials on dislocation sink efficiencies in Zr: Multiscale modeling10.1103/PhysRevB.90.014104 ↗
16. Numerical evaluation of dislocation loop sink strengths: A phase-field approach10.1016/j.nimb.2015.01.006 ↗
17. 3D phase-field modelling of dislocation loop sink strengths10.1016/j.jnucmat.2016.10.041 ↗
18. Anisotropic diffusion in stress fields10.1103/PhysRevB.17.2524 ↗
19. Point-defect diffusion in a strained crystal10.1103/PhysRevB.25.7428 ↗
20. Point-defect anisotropic diffusion in strained hcp metals10.1103/PhysRevB.35.6064 ↗
21. Shape effect in the drift diffusion of point defects into straight dislocations10.1103/PhysRevB.30.3084 ↗
22. Non-random walk diffusion enhances the sink strength of semicoherent interfaces10.1038/ncomms10424 ↗
23. Effect of grain boundary stresses on sink strength10.1080/21663831.2013.871588 ↗
24. Instability of irradiation induced defects in nanostructured materials10.1016/S0168-583X(96)00863-4 ↗
25. Accumulation and recovery of defects in ion-irradiated nanocrystalline gold10.1016/S0022-3115(01)00629-8 ↗
26. A. Khachaturyan, Theory of Structural Transformations in Solids, Wiley.
27. The synthesis of elastic dislocation fields
28. Stress-induced diffusion of point defects to spherical sinks10.1063/1.321679 ↗
29. Void bias factors due to the anisotropy of the point defect diffusion10.1016/0022-3115(93)90266-2 ↗
30. Dislocation models of crystal grain boundaries10.1103/PhysRev.78.275 ↗
31. Stress concentration around a spherical cavity in a cubic medium10.1243/03093247JSA226 ↗
32. The determination of the elastic field of an ellipsoidal inclusion, and related problems
33. Phase-field modeling of precipitate evolution dynamics in elastically inhomogeneous low-symmetry systems: Application to hydride precipitation in Zr10.1016/j.actamat.2012.05.041 ↗
34. Mesoscale modeling of coherent zirconium hydride precipitation under an applied stress10.1016/j.jnucmat.2013.02.034 ↗
35. Microscopic phase-field modeling of hcp—fcc interfaces10.1016/j.commatsci.2017.02.012 ↗
36. A 3D crystal plasticity model for coherency loss during precipitation10.1088/1361-651X/aacfdb ↗
37. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
38. Point defect behaviour in irradiated materials10.1016/0001-6160(75)90148-0 ↗
39. Kittel · 2004
40. Development of new interatomic potentials appropriate for crystalline and liquid iron10.1080/14786430310001613264 ↗
41. Comparison of empirical interatomic potentials for iron applied to radiation damage studies10.1016/j.jnucmat.2010.05.017 ↗
42. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
43. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
44. Point-defect calculations for an fcc lattice10.1103/PhysRev.145.423 ↗
45. Ab initio calculations of defects in Fe and dilute Fe-Cu alloys10.1103/PhysRevB.65.024103 ↗
46. Kinetic monte-carlo simulation of self-point defect diffusion in dislocation elastic fields in bcc iron and vanadium10.1016/j.jnucmat.2010.12.176 ↗
47. A continuous model including elastodiffusion for sink strength calculation of interfaces10.1016/j.commatsci.2018.07.023 ↗
48. Point defect sink efficiency of low-angle tilt grain boundaries10.1016/j.jmps.2017.01.011 ↗
49. Point defect sink strength of low-angle tilt grain boundaries: A phase field dislocation climb model10.1016/j.ijplas.2019.03.008 ↗
50. Predicting structure and energy of dislocations and grain boundaries10.1016/j.actamat.2014.03.065 ↗
51. Phase field microelasticity model of dislocation climb: Methodology and applications10.1016/j.actamat.2014.07.003 ↗
52. A phase field model for dislocation climb10.1063/1.4860999 ↗
53. Multiscale theory of dislocation climb10.1103/PhysRevLett.115.265501 ↗
54. Investigation of coherency loss by prismatic punching with a nonlinear elastic model10.1016/j.actamat.2014.03.005 ↗
55. Seismic modeling10.1190/1.1500393 ↗
56. Modeling the propagation of elastic waves using a modified finite-difference grid10.1016/S0165-2125(99)00023-2 ↗
57. Atomic-based phase-field method for the modeling of radiation induced segregation in Fe–Cr10.1016/j.commatsci.2016.05.021 ↗