Interfacial interactions and properties of lead oxysalts passivated MAPbI3 perovskites from first-principles calculations
Source abstract
Abstract
Abstract The stability issue of organohalide lead perovskites in humid conditions is a key challenge to their commercial application in the photovoltaic field. In this study, density functional theory (DFT) and non-equilibrium Green’s function (NEGF) calculations were employed to clarify the interfacial interactions and properties between the perovskite and its lead oxysalt passivation layers. It was found that internally-generated electric fields form at the interfaces and the photoexcited electrons transfer from the perovskite to the lead oxysalts side. The strong orbital hybridization at the interface accounted for electron-hole excitations, interface reconstruction, electron redistribution, and stability enhancement. Most importantly, the lead oxysalt-capped MAPbI3 was found to be capable to withstand the reaction with atomic oxygen through passivating the under-coordinated anions. Theoretical studies reveal that the introduction of lead oxysalts can effectively protect MAPbI3 from erosion. These findings illustrate the passivation mechanism of lead oxysalts to stabilize the efficiency of perovskite photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Organometallic halide perovskites: Sharp optical absorption edge and its elation to photovoltaic performance10.1021/jz500279b ↗
2. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
3. Understanding of the formation of shallow level defects from the intrinsic defects of lead tri-halide perovskites10.1039/C6CP02886A ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
5. National Renewable Energy Laboratory (NREL), Best research-cell efficiency chart, https://www.nrel.gov/pv/cell-efficiency.html. (accessed February 2020).
6. Recent efficient strategies for improving the moisture stability of perovskite solar cells10.1039/C7TA01325F ↗
7. The importance of moisture in hybrid lead halide perovskite thin film fabrication10.1021/acsnano.5b03626 ↗
8. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering10.1002/adma.201701073 ↗
9. Mechanisms for light induced degradation in MAPbI3 perovskite thin films and solar cells10.1063/1.4967840 ↗
10. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films10.1039/C6EE02941H ↗
11. Humidity-induced grain boundaries in MAPbI3 perovskite films10.1021/acs.jpcc.6b00335 ↗
12. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
13. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
14. Enhanced photoluminescence and solar cell performance via lewis base passivation of organic-inorganic lead halide perovskites10.1021/nn5036476 ↗
15. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
16. Thermal stability-enhanced and high-efficiency planar perovskite solar cells with interface passivation10.1021/acsami.7b10994 ↗
17. Enhanced performance and stability of perovskite solar cells using NH4I interfacial modifier10.1021/acsami.7b12721 ↗
18. Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts10.1126/science.aax3294 ↗
19. Efficient and stable perovskite solar cells thanks to dual functions of oleyl amine-coated PbSO4(PbO)4 quantum dots: defect passivation and moisture/oxygen blocking10.1016/j.nanoen.2019.104313 ↗
20. Lead acetate assisted interface engineering for highly efficient and stable perovskite solar cells10.1021/acsami.9b19691 ↗
21. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
22. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
23. Computational materials engineering: Recent applications of VASP in the MedeA® software environment10.4191/kcers.2016.53.3.263 ↗
24. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
25. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
26. “Special points for Brillouin-zone integrations”-a reply10.1103/PhysRevB.16.1748 ↗
27. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
28. Hybrid functionals based on a screened coulomb potential10.1063/1.1564060 ↗
29. QuantumATK: an integrated platform of electronic and atomic-scale modelling tools
30. The SIESTA method forab initioorder-Nmaterials simulation
31. The PseudoDojo: training and grading A 85 element optimized norm-conserving pseudopotential table10.1016/j.cpc.2018.01.012 ↗
32. Efficient first-principles calculation of phonon-assisted photocurrent in large-scale solar-cell devices10.1103/PhysRevApplied.10.014026 ↗
33. Effect of phase transition on optical properties and photovoltaic performance in cesium lead bromine perovskite: a theoretical study10.1021/acs.jpcc.9b05629 ↗
34. First-principles study on the lattice plane and termination dependence of the electronic properties of the NiO/CH3NH3PbI3 interfaces10.1039/C8TC01974F ↗
35. Structural evolution in methylammonium lead iodide CH3NH3PbI310.1021/acs.jpca.5b09884 ↗
36. Crystal structures, optical properties, and effective mass tensors of CH3NH3PbX3 (X = I and Br) phases predicted from HSE0610.1021/jz500480m ↗
37. One-pot synthesis of PbSO4-sheathed PbS butterfly-like microstructures with high luminescence property10.1016/j.jallcom.2009.12.132 ↗
38. A high-pressure study of PbCO3 by XRD and Raman spectroscopy10.1088/1674-1137/37/3/038001 ↗
39. Bulk crystal growth of hybrid perovskite material CH3NH3PbI310.1039/C4CE02106A ↗
40. Pressure-induced phase transformations of PbCO3 by X-ray diffraction and Raman spectroscopy10.1080/08957959.2015.1118475 ↗
41. Surface properties of CH3NH3PbI3 for perovskite solar cells10.1021/acs.accounts.5b00452 ↗
42. Probing interfacial electronic properties of graphene/CH3NH3PbI3 heterojunctions: A theoretical study10.1016/j.apsusc.2017.12.260 ↗
43. Electronic properties of the graphdiyne/CH3NH3PbI3 interface: a first-principles study10.1002/pssr.201900544 ↗
44. Negative differential resistance and stable conductance switching behaviors of salicylideneaniline molecular devices sandwiched between armchair graphene nanoribbon electrodes Chen10.1016/j.orgel.2015.08.028 ↗
45. Surface relaxations, surface energies and electronic structures of BaSnO3 (001) surfaces: ab initio calculations10.1007/s11664-017-5348-5 ↗
46. Band structures, effective masses and exciton binding energies of perovskite polymorphs of CH3NH3PbI310.1016/j.solener.2019.08.055 ↗
47. Ab initio study of PbCr(1–x)SxO4 solid solution: an inside look at Van Gogh Yellow degradation10.1039/C5SC04362J ↗
48. A fast and robust algorithm for Bader decomposition of charge density10.1016/j.commatsci.2005.04.010 ↗
49. ELF: the electron localization function10.1002/anie.199718081 ↗
50. Experimental and theoretical optical properties of methylammonium lead halide perovskites10.1039/C5NR05435D ↗
51. Optical properties of photovoltaic organic-inorganic lead halide perovskites10.1021/acs.jpclett.5b01865 ↗
52. Relativistic GW calculations on CH3NH3PbI3 and CH3NH3SnI3 perovskites for solar cell applications10.1038/srep04467 ↗
53. Effect of crystal structure on the electronic transport properties of the organometallic perovskite CH3NH3PbI310.1016/j.solmat.2015.09.006 ↗
54. Conductance viewed as transmission10.1103/RevModPhys.71.S306 ↗