On the yielding and densification of nanoporous Au nanopillars in molecular dynamics simulations
Source abstract
Abstract
Abstract We report on the plastic deformation characteristics of nanoporous gold nanopillars under compression in molecular dynamics simulations. The stress-strain curves demonstrate an initial non-linear regime up to compressive true strains of about 5%, followed by a stress plateau and a strong hardening stage. The plateau stress is increasing with the ligament size. In addition, a power-law is fitted to the stress variation during the plateau and hardening stages. In order to relate the mechanical response to the dislocation activity, an in-house post-processing technique was developed to skeletonize the structure and to identify the yielded ligaments. We found that the elastic-plastic transition starts at a strain substantially lower than that of the plateau. The load-bearing capacity is further retained by the unyielded ligaments within the three-dimensionally connected network, allowing further increase in the stress and at the onset of the plateau stress 40% of the ligaments have already yielded plastically. Calculation of the genus of the subnetwork of unyielded ligaments shows that it drops to zero at the onset of the plateau stage. Additionally, the rate of dislocation nucleation is maximum at the onset of the plateau, allowing to continue the plastic flow without increasing the stress. The stress starts increasing again as the ligaments coalesce and the nanoporous structure densifies. Based on the analysis of the genus of the whole structure during compression, we propose a correlation between the hardening and the topology of the structure, suggesting that hardening is dominated by the coalescence of ligaments. During coalescence, grain boundaries were formed between coalesced ligaments, some are either removed or retained. As a result, at very large compressive strains the single crystal nanoporous nanopillar turns into a polycrystalline specimen with some disconnected pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoporous metals and alloys · Anodic Oxide Films and Nanostructures · Nanocluster Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Surface-chemistry-driven actuation in nanoporous gold10.1038/nmat2335 ↗
2. Non-aqueous nanoporous gold based supercapacitors with high specific energy10.1016/j.scriptamat.2016.01.016 ↗
3. Nanoporous-gold-based composites: toward tensile ductility10.1038/am.2015.58 ↗
4. Biofunctionalized nanoporous gold for electrochemical biosensors10.1016/j.electacta.2011.12.132 ↗
5. Approaching the theoretical strength in nanoporous Au10.1063/1.2240109 ↗
6. Deformation mechanisms in gold nanowires and nanoporous gold10.1080/14786435.2010.481271 ↗
7. Additive manufacturing of 3D nano-architected metals10.1038/s41467-018-03071-9 ↗
8. Mechanical properties of bulk single crystalline nanoporous gold investigated by millimetre-scale tension and compression testing10.1080/14786435.2013.868944 ↗
9. Nanoporous Au foams: variation of effective Young’s modulus with ligament size10.1016/j.scriptamat.2017.09.038 ↗
10. Topology-dependent scaling laws for the stiffness and strength of nanoporous gold10.1016/j.actamat.2016.08.012 ↗
11. Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures10.1016/j.actamat.2016.08.071 ↗
12. Size-dependent elastic modulus of nanoporous Au nanopillars10.1016/j.actamat.2019.12.018 ↗
13. Deformation mechanisms in nanoporous metals: effect of ligament shape and disorder10.1016/j.commatsci.2016.10.035 ↗
14. Nanoporous Au: a high yield strength material10.1063/1.1832742 ↗
15. Size effects on the mechanical behavior of nanoporous Au10.1021/nl061978i ↗
16. Scaling equation for yield strength of nanoporous open-cell foams10.1016/j.actamat.2006.09.038 ↗
17. High temperature flow behavior of ultra-strong nanoporous au assessed by spherical nanoindentation10.3390/nano8060366 ↗
18. Nanoporous gold—testing macro-scale samples to probe small-scale mechanical behavior10.1080/21663831.2015.1094679 ↗
19. Mechanical behaviour of metallic foams10.1146/annurev.matsci.30.1.191 ↗
20. Atomistic simulations of the yielding of gold nanowires10.1016/j.actamat.2005.10.008 ↗
21. Mechanical response of freestanding Au nanopillars under compression10.1063/1.2778761 ↗
22. Atomistic simulation of the deformation of gold nanopillars10.1016/j.actamat.2006.10.058 ↗
23. In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal10.1038/nmat2370 ↗
24. Mechanical properties of nanoporous gold subjected to tensile stresses in real-time, sub-microscopic scale10.1007/s10853-019-03762-8 ↗
25. Time-resolved atomic-scale observations of deformation and fracture of nanoporous gold under tension10.1016/j.actamat.2018.11.022 ↗
26. 3D stochastic bicontinuous microstructures: Generation, topology and elasticity10.1016/j.actamat.2018.01.005 ↗
27. Interpreting anomalous low-strength and low-stiffness of nanoporous gold: Quantification of network connectivity10.1016/j.actamat.2016.07.033 ↗
28. Scaling equation for the elastic modulus of nanoporous gold with “fixed” network connectivity10.1063/1.4984108 ↗
29. Connections between topology and macroscopic mechanical properties of three-dimensional open-pore materials10.3389/fmats.2018.00069 ↗
30. Topology evolution during coarsening of nanoscale metal network structures10.1103/PhysRevMaterials.3.076001 ↗
31. Scaling laws of nanoporous gold under uniaxial compression: Effects of structural disorder on the solid fraction, elastic Poisson’s ratio, Young’s modulus and yield strength10.1016/j.jmps.2016.02.018 ↗
32. Hardening under compression in Au foams10.1016/j.actamat.2016.02.030 ↗
33. Anomalous compliance and early yielding of nanoporous gold10.1016/j.actamat.2015.04.021 ↗
34. Nanoindentation tests of heavy-ion-irradiated Au foams – molecular dynamics simulation10.1063/1.5027191 ↗
35. Indentation response of nanoporous gold from atomistic simulations10.1557/jmr.2018.72 ↗
36. Mechanical properties of Au foams under nanoindentation10.1016/j.commatsci.2018.02.019 ↗
37. Mechanical response of Au foams of varying porosity from atomistic simulations10.1007/s11837-018-3050-6 ↗
38. Deformation mechanisms and scaling relations in the mechanical response of nano-porous Au10.1016/j.actamat.2018.12.006 ↗
39. A review of experimentally informed micromechanical modeling of nanoporous metals: from structural descriptors to predictive structure-property relationships10.3390/ma13153307 ↗
40. Nanoporous gold: 3D structural analyses of representative volumes and their implications on scaling relations of mechanical behaviour10.1080/14786435.2016.1222087 ↗
41. Mechanical response of nanoporous gold10.1016/j.actamat.2013.02.013 ↗
42. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
43. Fast Parallel Algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
44. G. Gregory, R.P. Salvy, S. Ian.K, On fitting a gold embedded atom method potential using the force matching method, J. Chem. Phys. 204719 (2005) 1–8, https://doi.org/10.1063/1.2124667.10.1063/1.2124667 ↗
45. Nanoindentation size effect in single-crystal nanoparticles and thin films: a comparative experimental and simulation study10.1016/j.actamat.2010.12.027 ↗
46. Length-dependent mechanical properties of gold nanowires10.1063/1.4768284 ↗
47. MATLAB version 9.4.0.813654 (R2018a), Natick, Massachusetts, United States, 2018. https://in.mathworks.com/help/images/ref/bwconncomp.html.
48. A. Manzanera, T. M.Bernard, F. Preteux, B. Longuet, Medial faces from a concise 3D thinning algorithm, Proc. Seventh IEEE Int. Conf. Comput. Vis. 1 (1999) 337–343, https://doi.org/10.1109/ICCV.1999.791239.10.1109/ICCV.1999.791239 ↗
49. A FIB-nanotomography method for accurate 3D reconstruction of open nanoporous structures10.1016/j.ultramic.2016.01.004 ↗
50. Plastic deformation in nanoscale gold single crystals and open-celled nanoporous gold10.1088/0965-0393/15/1/S15 ↗
51. Plastic Poisson’s ratio of nanoporous metals: a macroscopic signature of tension-compression asymmetry at the nanoscale10.1021/acs.nanolett.7b02950 ↗
52. Deforming nanoporous metal: role of lattice coherency10.1016/j.actamat.2009.02.017 ↗
53. Elastic and plastic Poisson’s ratios of nanoporous gold10.1016/j.scriptamat.2015.08.002 ↗
54. Mechanical response of nanoporous metals: a story of size, surface stress, and severed struts10.1557/mrs.2017.302 ↗
55. Mechanism of coarsening and bubble formation in high-genus nanoporous metals10.1103/PhysRevLett.106.225504 ↗
56. Scaling laws of nanoporous metals under uniaxial compression10.1016/j.actamat.2013.12.003 ↗
57. Size effect in compression of single-crystal gold microparticles10.1016/j.actamat.2011.04.057 ↗
58. Dislocation-nucleation-controlled deformation of Ni3Al nanocubes in molecular dynamics simulations10.1088/0965-0393/23/8/085004 ↗
59. Nucleation-controlled plasticity of metallic nanowires and nanoparticles10.1002/adma.201706710 ↗
60. Orientation-dependent mechanical properties of Au nanowires under uniaxial loading10.1016/j.commatsci.2010.02.015 ↗
61. Uniaxial compression testing of bulk nanoporous gold10.1080/14786435.2017.1292060 ↗
62. Coarsening by network restructuring in model nanoporous gold10.1016/j.actamat.2011.08.037 ↗