journal article·2022-08

2D lead free Ruddlesden-Popper phase perovskites as efficient photovoltaic materials: A first-principles investigation

Sampad Mandal, Basir Ahamed Khan, Pranab Sarkar

Publisher page

Abstract

Though lead halide perovskites hold impressive optoelectronic properties, because of the bottleneck of lead toxicity, searching for the lead free perovskites is highly demanding for their commercial applications in the optoelectronic devices. Alongside of the lead free perovskites, two dimensional (2D) organic–inorganic hybrid halide perovskites (OIHHPs) are getting great attention as photovoltaic materials due to their air stability over the three dimensional(3D) counterpart and high performance. Herein, we have investigated recently synthesized lead free 2D Ruddlesden-Popper (RP) phase OIHHPs (X-PEA) 2 SnI 4 (PEA=phenylethylammonium and X=H, para-F, meta-F, ortho-F) along with (PEA) 2 Sn 1 − x Ge x I 4 where x = 0.5 and 1. Here studied all perovskites are direct band gap semiconductors with band gap in the solar energy region with high absorption coefficients. We have calculated the charge carrier effective masses along X– Γ –X and Y– Γ –Y and finally we have estimated maximum theoretical photoconversion efficiency (PCE) for all which reaches up to 25.58% making them suitable for their applications in high performance photovolatic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · 2D Materials and Applications · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. 2019
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Formamidinium-containing metal-halide: an alternative material for near-IR absorption perovskite solar cells10.1021/jp411112k ↗
4. Hybrid germanium iodide perovskite semiconductors: active lone pairs, structural distortions, direct and indirect energy gaps, and strong nonlinear optical properties10.1021/jacs.5b01025 ↗
5. Lead-free germanium iodide perovskite materials for photovoltaic applications10.1039/C5TA05741H ↗
6. Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance10.1021/jacs.7b01815 ↗
7. Lead-free organic-inorganic tin halide perovskites for photovoltaic applications10.1039/C4EE01076K ↗
8. Phase evolution in lead-free Cs-doped FASnI3 hybrid perovskites and optical properties10.1021/acs.jpcc.1c02993 ↗
9. Interplay between iodide and tin vacancies in CsSnI3 perovskite solar cells10.1021/acs.jpcc.7b06278 ↗
10. Two-dimensional organic tin halide perovskites with tunable visible emission and their use in light-emitting devices10.1021/acsenergylett.7b00414 ↗
11. Charge-carrier dynamics in 2D hybrid metal-halide perovskites10.1021/acs.nanolett.6b03114 ↗
12. High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells10.1038/nature18306 ↗
13. Organic-inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors10.1126/science.286.5441.945 ↗
14. A new organic interlayer spacer for stable and efficient 2D Ruddlesden-Popper perovskite solar cells10.1021/acs.nanolett.9b01652 ↗
15. A layered hybrid perovskite solar-cell absorber with enhanced moisture stability10.1002/anie.201406466 ↗
16. 2D homologous perovskites as light-absorbing materials for solar cell applications10.1021/jacs.5b03796 ↗
17. Ligand-stabilized reduced-dimensionality perovskites10.1021/jacs.5b11740 ↗
18. Layered perovskites in solar cells: Structure, optoelectronic properties, and device design10.1002/aenm.202003877 ↗
19. Dielectric confinement effect on excitons in PbI4-based layered semiconductors10.1103/PhysRevB.45.6961 ↗
20. Impact of organic spacers on the carrier dynamics in 2D hybrid lead-halide perovskites10.1021/acsenergylett.8b01888 ↗
21. 2D Ruddlesden-Popper perovskites for optoelectronics10.1002/adma.201703487 ↗
22. Two-dimensional hybrid halide perovskites: principles and promises10.1021/jacs.8b10851 ↗
23. Unique characteristics of 2D Ruddlesden-Popper (2DRP) perovskite for future photovoltaic application10.1039/C9TA03217G ↗
24. Two-dimensional lead (II) halide-based hybrid perovskites templated by acene alkylamines: crystal structures, optical properties, and piezoelectricity10.1021/acs.inorgchem.7b01094 ↗
25. Highly distorted chiral two-dimensional tin iodide perovskites for spin polarized charge transport10.1021/jacs.0c03899 ↗
26. Chemical trends of electronic properties of two-dimensional halide perovskites and their potential applications for electronics and optoelectronics10.1021/acs.jpcc.6b10162 ↗
27. Highly stable lead-free perovskite field-effect transistors incorporating linear π-conjugated organic ligands10.1021/jacs.9b06276 ↗
28. Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%10.1126/sciadv.aaw2543 ↗
29. Chemical approaches to addressing the instability and toxicity of lead-halide perovskite absorbers10.1021/acs.inorgchem.6b01336 ↗
30. Arene and functionalized arene based two dimensional organic-inorganic hybrid perovskites for photovoltaic applications10.1002/jcc.26731 ↗
31. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
32. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
33. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
34. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
35. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
36. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
37. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
38. Hybrid functionals based on a screened Coulomb potential10.1063/1.1564060 ↗
39. “Special points for brillouin-zone integrations”—a reply10.1103/PhysRevB.16.1748 ↗
40. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
41. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
42. VASPKIT: A user-friendly interface facilitating high-throughput computing and analysis using VASP code10.1016/j.cpc.2021.108033 ↗
43. VESTA: A three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
44. Molden: a pre-and post-processing program for molecular and electronic structures10.1023/A:1008193805436 ↗
45. Tuning the band gap in hybrid tin iodide perovskite semiconductors using structural templating10.1021/ic050244q ↗
46. Tailoring the electronic band gap and band edge positions in the C2N monolayer by P and As substitution for photocatalytic water splitting10.1021/acs.jpcc.7b07776 ↗
47. Monolayer, bilayer, and heterostructures of green phosphorene for water splitting and photovoltaics10.1021/acs.jpcc.8b08566 ↗
48. GW Band structures and carrier effective masses of CH3NH3PbI3 and hypothetical perovskites of the type APbI3: A=NH4, PH4, ash4, and sbh410.1021/acs.jpcc.5b07891 ↗
49. Photocatalytic properties of g-C6N6/g-C3N4 heterostructure: a theoretical study10.1021/acs.jpcc.6b08699 ↗
50. Electronic structure and photocatalytic water-splitting properties of Ag2ZnSn (s1−xSex)410.1021/acs.jpcc.5b09522 ↗
51. The role of effective mass of carrier in the photocatalytic behavior of silver halide-based Ag@ AgX (X=Cl, Br, I): A theoretical study10.1002/cphc.201200159 ↗
52. Impact of monovalent cation halide additives on the structural and optoelectronic properties of CH3NH3PbI3 perovskite10.1002/aenm.201502472 ↗
53. Dual-source precursor approach for highly efficient inverted planar heterojunction perovskite solar cells10.1002/adma.201604758 ↗
54. Orientation regulation of phenylethylammonium cation based 2D perovskite solar cell with efficiency higher than 11%10.1002/aenm.201702498 ↗
55. Common defects accelerate charge separation and reduce recombination in CNT/Molecule composites: Atomistic quantum dynamics10.1021/jacs.1c02325 ↗
56. Optical properties of molybdenum. I. Experiment and Kramers-Kronig analysis10.1103/PhysRevB.10.1280 ↗
57. Two-dimensional CP3 monolayer and its fluorinated derivative with promising electronic and optical properties: A theoretical study10.1103/PhysRevB.101.195305 ↗
58. Lead free two-dimensional mixed tin and germanium halide perovskites for photovoltaic applications10.1021/acs.jpcc.0c08164 ↗
59. Photovoltaic performance of lead-less hybrid perovskites from theoretical study10.1021/acs.jpcc.9b02705 ↗
60. Estimating the maximum attainable efficiency in dye-sensitized solar cells10.1002/adfm.200901476 ↗
61. Two-dimensional CH3NH3pbi3 with high efficiency and superior carrier mobility: A theoretical study10.1021/acs.jpcc.8b11427 ↗
62. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
63. Semiconducting monolayer materials as a tunable platform for excitonic solar cells10.1021/nn303815z ↗
64. NREL, The AM1.5G spectrum was taken from the NREL Website, https://www.nrel.gov/grid/solar-resource/spectra.html.
65. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗