journal article·2023-10

Introduction to elastically isotropic β-Ti alloys

C. Sobczak, P. Kwasniak, M. Muzyk, P. Strak, F. Prima

Publisher page

Abstract

This paper presents application of an electronic-based approach to the design of elastically isotropic and metastable β -Ti alloys. A systematic ab initio calculations were performed to predict the elastic properties of binary and ternary alloys, considering the 3 d and 4 d transition metals as solute elements. It was found, that at specific average concentration of valence electron e/a = 4.72, the binary and ternary Ti-based 3 d alloys are elastically isotropic. The same properties are achieved at smaller e/a = 4.59 when 4 d metals are used for alloying. As a result, three lightweight elastically isotropic β -Ti solutions were designed: Ti-46Mo, Ti-17Fe-7Cr and Ti-17Fe-13V wt.% with a significantly reduced concentration of alloying elements relative to the only known elastically isotropic Ti-72V wt.% system. Investigation of the generalized stacking fault energy of two { 1 1 0 } 〈 1 1 1 〉 and { 1 1 2 } 〈 1 1 1 〉 slip modes of body-centered cubic (BCC) lattice indicates that isotropy of elastic properties does not yield the same isotropy in terms of plastic deformation. Analysis of the electronic structure of materials with diversified elastic anisotropy reveals also that isotropic systems display transition of the bond character from direct covalent to more delocalized metallic bond. This transition together with electrostatic ion-ion interaction and number of valence electrons control the elastic anisotropy of BCC transition metals and alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Single crystal elastic properties of Tungsten from 24° to 1800℃10.1063/1.1709158 ↗
2. Structural bonding contributions and the elastic response of B.C.C. and F.C.C. crystals10.1016/0956-7151(92)90421-A ↗
3. Young’s modulus surface and Poisson’s ratio curve for cubic metals10.1016/j.jpcs.2007.01.025 ↗
4. Krupp · 2007
5. Grain boundary engineering: fatigue fracture10.1080/14786435.2017.1285072 ↗
6. Collings · 1975
7. Ab initio design of elastically isotropic TiZrNbMoVx high-entropy alloys10.1016/j.jallcom.2014.01.237 ↗
8. Contributions to the theory of beta-phase alloys10.1103/PhysRev.71.846 ↗
9. C. Luke, R. Taggart, D. Polonis, THE METASTABLE CONSTITUTION OF QUENCHED TITANIUM AND ZIRCONIUM-BASE BINARY ALLOYS, Trans. Am. Soc. Met..
10. Superconducting transition temperature, lattice instability, and electron-to-atom ratio in transition-metal binary solid solutions10.1103/PhysRevB.5.4435 ↗
11. A physical basis for solid-solution strengthening and phase stability in alloys of titanium10.1016/0036-9748(73)90092-6 ↗
12. Elasticity and anelasticity of metals10.1021/j150474a017 ↗
13. A quantum mechanical investigation of the cohesive forces of metallic copper
14. The elastic constants and specific heats of the alkali metals
15. Pressure derivatives of the elastic moduli of BCC Ti-V-Cr, Nb-Mo and Ta-W alloys10.1088/0305-4608/9/5/006 ↗
16. Massalski · 1990
17. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
18. Peculiar elastic behavior of Ti-Nb-Ta-Zr single crystals10.1016/j.actamat.2008.02.017 ↗
19. Low Young’s modulus of Ti-Nb-Ta-Zr alloys caused by softening in shear moduli c′ and c44 near lower limit of body-centered cubic phase stability10.1016/j.actamat.2010.09.007 ↗
20. Origin of ultralow Young’s modulus in a metastable β-type Ti-33Nb-4Sn alloy10.1016/j.jmbbm.2015.12.037 ↗
21. Origin of low Young modulus of multicomponent, biomedical Ti alloys - Seeking optimal elastic properties through a first principles investigation10.1016/j.jmbbm.2018.08.040 ↗
22. Ab initio design of elastically isotropic TiZrNbMoVx high-entropy alloys10.1016/j.jallcom.2014.01.237 ↗
23. Elastic properties of AlxCrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory10.1016/j.actamat.2018.05.050 ↗
24. Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy10.1016/j.intermet.2018.08.003 ↗
25. Alloying effect on the elastic properties of refractory high-entropy alloys10.1016/j.matdes.2016.11.079 ↗
26. Kresse · Phys. Rev. B · 1993 · 47 · 55810.1103/PhysRevB.47.558 ↗
27. Kresse · Phys. Rev. B · 1996 · 54 · 1116910.1103/PhysRevB.54.11169 ↗
28. Vienna Ab initio Simulation Package, https://www.vasp.at.
29. Blöchl · Phys. Rev. B · 1994 · 50 · 1795310.1103/PhysRevB.50.17953 ↗
30. Perdew · Phys. Rev. Lett. · 1996 · 77 · 386510.1103/PhysRevLett.77.3865 ↗
31. Monkhorst · Phys. Rev. B · 1976 · 13 · 518810.1103/PhysRevB.13.5188 ↗
32. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
33. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
34. The alloy theoretic automated toolkit: A user guide10.1016/S0364-5916(02)80006-2 ↗
35. Thermodynamic modeling of the Fe-Ti-V system10.1016/j.calphad.2012.06.010 ↗
36. V. Ivanchenko, T. Pryadko, in: G. Effenberg, S. Ilyenko (Eds.), Chromium – Iron – Titanium: Datasheet from Landolt-Börnstein - Group IV Physical Chemistry · Volume 11D3: “Ternary Alloy Systems” in SpringerMaterials, Springer-Verlag Berlin Heidelberg, http://dx.doi.org/10.1007/978-3-540-74199-2_17.10.1007/978-3-540-74199-2_17 ↗
37. Effect of Sn on microstructure and mechanical properties of Ti-Fe-(Sn) ultrafine eutectic composites10.1557/JMR.2010.0116 ↗
38. Heat resistance and elastic properties of Ti-Mo alloys10.1007/BF00651720 ↗
39. Tensile behavior and cold workability of Ti-Mo alloys10.2320/matertrans.45.1571 ↗
40. The effect of TiC and Zr additions on the microstructure and mechanical properties of Ti-30Mo alloy10.3390/met12061025 ↗
41. Effect of molybdenum content on structural, mechanical, and tribological properties of hot isostatically pressed β-type titanium alloys for orthopedic applications10.1007/s11665-019-04348-w ↗
42. Thermodynamics of crystals10.1119/1.1987046 ↗
43. Giustino · 2014
44. Pressure dependence of the elastic moduli in aluminum-rich Al-Li compounds10.1103/PhysRevB.47.2493 ↗
45. Elastic constants of cubic crystals10.1016/j.commatsci.2014.08.027 ↗
46. Ab initio elastic tensor of cubic Ti0.5Al0.5N alloys: Dependence of elastic constants on size and shape of the supercell model and their convergence10.1103/PhysRevB.85.144112 ↗
47. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
48. Meyers · 2009
49. Dislocations and stacking faults10.1088/0034-4885/33/1/307 ↗
50. A peierls criterion for the onset of deformation twinning at a crack tip10.1016/S0022-5096(03)00005-X ↗
51. Influence of C, H, N, and O interstitial atoms on deformation mechanism in titanium–First principles calculations of generalized stacking fault energy10.1016/j.matlet.2012.12.002 ↗
52. Dislocation nucleation from a crack tip: An analysis based on the Peierls concept10.1016/S0022-5096(05)80012-2 ↗
53. Kwaśniak · Phys. Rev. B · 2014 · 8910.1103/PhysRevB.89.144105 ↗
54. First-principles thermoelasticity of BCC iron under pressure10.1103/PhysRevB.74.214111 ↗
55. Frank-read source operation in six body-centered cubic refractory metals10.1016/j.jmps.2020.104017 ↗
56. Stacking fault energy and electronic structure of molybdenum under solid solution softening/hardening10.1007/s11771-021-4584-2 ↗
57. The effects of interstitial impurities on the mechanical properties of vanadium alloys: A first-principles study10.1016/j.jallcom.2017.01.135 ↗
58. Constrained deformation of molybdenum single crystals10.1016/0001-6160(75)90157-1 ↗