journal article·2017-06Open access

Embedded atom method interatomic potentials fitted upon density functional theory calculations for the simulation of binary Pt Ni nanoparticles

Emmanouil Symianakis, Anthony Kucernak

Abstract

Abstract Embedded Atom Method (EAM) potentials have been fitted for the atomistic simulation of small, ∼2–5 nm, binary, Pt Ni, nanoparticles completely from Density Functional Theory (DFT) total energy calculations. The overall quality of the DFT calculations and the final potential is obtained through the independent calculation of an array of properties of the pure metals and the stable alloys, which are normally used for the fitting of interatomic potentials. The ability of the fitted potentials to simulate nanostructures is evaluated by the reproduction of binary nanoslabs with thickness ∼1 nm, and nanoparticles in the extreme case of the smallest icosahedrons possible, with diameter ∼0.6 nm. The used approach requires high quality of convergence but otherwise low cost DFT as it is based on static total energy calculations. It also provides objective criteria for the evaluation of the fitted potentials during fitting and has been implemented with the open source code GULP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Chemical Physics Studies · Machine Learning in Materials Science · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Finite deformations of an elastic solid10.2307/2371405 ↗
2. Universal binding-energy curves for metals and bimetallic interfaces10.1103/PhysRevLett.47.675 ↗
3. Temperature effects on the universal equation of state of solids10.1103/PhysRevB.35.1945 ↗
4. Universal features of the equation of state of metals10.1103/PhysRevB.29.2963 ↗
5. Embedded-atom method – derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
6. Semiempirical, quantum-mechanical calculation of hydrogen embrittlement in metals10.1103/PhysRevLett.50.1285 ↗
7. Embedded-atom-method functions for the FCC metals CU, AG, AU, NI, PD, PT, and their alloys10.1103/PhysRevB.33.7983 ↗
8. Monte Carlo simulations of segregation in Pt-Ni catalyst nanoparticles10.1063/1.1828033 ↗
9. Analytic embedded atom method potentials for face-centered cubic metals10.1557/JMR.1998.0271 ↗
10. Alloy models with the embedded-atom method10.1103/PhysRevB.39.12554 ↗
11. Analytic embedded atom method model for BCC metals10.1557/JMR.1989.1195 ↗
12. Y, M., Handbook of materials modeling, in: S. Yip (Ed.), Springer, The Netherlands, 2005, pp. 459–78.
13. On fitting a gold embedded atom method potential using the force matching method10.1063/1.2124667 ↗
14. Application of the embedded-atom method to covalent materials – a semiempirical potential for silicon10.1103/PhysRevLett.59.2666 ↗
15. Semiempirical modified embedded-atom potentials for silicon and germanium10.1103/PhysRevB.40.6085 ↗
16. Modified embedded-atom potentials for cubic materials and impurities10.1103/PhysRevB.46.2727 ↗
17. Modified embedded-atom potentials for HCP metals10.1088/0965-0393/2/1/011 ↗
18. Semiempirical atomic potentials for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, Al, and Pb based on first and second nearest-neighbor modified embedded atom method10.1103/PhysRevB.68.144112 ↗
19. M.T.M. Koper, Fuel cell catalysis: a surface science approach. Fuel cell catalysis: a surface science approach 2008, xiii + 697 pp.-xiii + 697 pp.10.1002/9780470463772 ↗
20. Phonon dispersion curves for transition metals within the embedded-atom and embedded-defect methods10.1103/PhysRevB.55.5570 ↗
21. Structural, vibrational, and thermodynamic properties of ordered and disordered Ni1-xPtx alloys from first-principles calculations10.1103/PhysRevB.83.144204 ↗
22. Harmonic and anharmonic properties of Fe and Ni: thermal expansion, exchange-correlation errors, and magnetism10.1103/PhysRevB.82.134418 ↗
23. Modeling bulk and surface Pt using the “Gaussian and plane wave” density functional theory formalism: validation and comparison to k-point plane wave calculations10.1063/1.3037227 ↗
24. Lattice dynamics and thermal equation of state of platinum10.1103/PhysRevB.78.024304 ↗
25. Periodic density functional theory study of Pt(111): surface features of slabs of different thicknesses10.1088/0953-8984/11/39/304 ↗
26. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
27. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
28. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
29. Generalized gradient approximation made simple (vol 77, pg 3865, 1996)10.1103/PhysRevLett.78.1396 ↗
30. Comment on “Generalized gradient approximation made simple” – reply10.1103/PhysRevLett.80.891 ↗
31. Comment on “Generalized gradient approximation made simple”10.1103/PhysRevLett.80.890 ↗
32. Ab-initio molecular-dynamics for liquid-metals10.1016/0022-3093(95)00355-X ↗
33. Ab-initio molecular-dynamics simulation of the liquid-metal amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
34. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
35. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
36. Accelrys Software Inc., Discovery Studio Modeling Environment, Release 3.5.
37. VESTA: a three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
38. Special points for brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
39. Comment on special points for brillouin-zone integrations10.1103/PhysRevB.18.5897 ↗
40. Special points for brillouin-zone integrations – reply10.1103/PhysRevB.16.1748 ↗
41. The pressure dependence of the elastic constants of cubic crystals in the NaCl and spinel structures from a lattice model10.1111/j.1365-246X.1970.tb06047.x ↗
42. M.J. Mehl, B.M. Klein, D.A. Papaconstantopoulos, First-principles calculation of elastic properties. In: Intermetallic Compounds: vol. 1, Principles, John Willey & sons, 1994, pp. 195–210.
43. Empirical potential derivation for ionic materials
44. GULP: a computer program for the symmetry-adapted simulation of solids10.1039/a606455h ↗
45. The general utility lattice program (GULP)10.1080/0892702031000104887 ↗
46. Density-functional theory modeling of bulk magnetism with spin-dependent pseudopotentials10.1103/PhysRevB.64.235105 ↗
47. First principle energies of binary and ternary phases of the Fe-Nb-Ni-Cr system10.1016/j.calphad.2011.09.004 ↗
48. Pt/Cr and Pt/Ni catalysts for oxygen reduction reaction: to alloy or not to alloy?10.1166/jnn.2011.3899 ↗
49. CO2 reduction on transition metal (Fe Co, Ni, and Cu) surfaces. In comparison with homogeneous catalysis10.1021/jp210480c ↗
50. Formic acid dehydrogenation on Ni(111) and comparison with Pd(111) and Pt(111)10.1021/jp209998r ↗
51. Thermal equation of state for Pt10.1103/PhysRevB.72.184102 ↗
52. Kittel · 1986
53. PtxNi alloy nanoparticles as cathode catalyst for PEM fuel cells with enhanced catalytic activity10.1016/j.jallcom.2009.08.077 ↗
54. Influence of the transition-metal and of order on the composition profile of pt80m20(111) (m=ni, co fe) alloy surfaces – leed study of pt80co20(111)10.1016/0039-6028(92)90689-4 ↗
55. Theoretical study of electrochemical processes on Pt-Ni alloys10.1021/jp111930w ↗
56. Anomalous temperature dependance of shear modulus C44 for platinum10.1016/0031-9163(65)90659-1 ↗
57. Thermodynamic properties of solid nickel-platinum alloys10.1016/0001-6160(70)90156-2 ↗
58. Investigation of thermal-equilibrium vacancies in metals by positron-annihilation10.1002/pssa.2211020104 ↗
59. Neutron study of magnetic-moment distribution in Ni-Pt alloys10.1103/PhysRevB.21.5494 ↗
60. Monte Carlo simulation of surface segregation phenomena in extended and nanoparticle surfaces of Pt-Pd alloys10.1088/0953-8984/23/47/475301 ↗
61. The influence of nonstoichiometry on LaMnO3 perovskite for catalytic NO oxidation10.1016/j.apcatb.2013.01.027 ↗