journal article·2018-11

A multi-scale modeling approach for simulating crack sensing in polymer fibrous composites using electrically conductive carbon nanotube networks. Part I: Micro-scale analysis

Konstantinos Tserpes, Christos Kora

Publisher page

Abstract

Abstract This is the first of a two-paper series describing a multi-scale modeling approach developed to simulate crack sensing in polymer fibrous composites by exploiting the interruption of electrically conductive carbon nanotube (CNT) networks. The approach is based on the finite element (FE) method. FE models at three different scales, namely the micro-scale, the meso-scale and the macro-scale have been developed using the ANSYS PDL environment. In the present paper, the micro-scale analysis is described. In the micro-scale, two representative volume elements (RVEs) have been developed: a RVE of a CNT/polymer for validating the computation of the effective electrical conductivity of the nanocomposite and a RVE of a CNT/composite for evaluating the effect of crack presence on the effective electrical conductivity. In the CNT/composite RVE, carbon fibers and glass fibers have been modeled. The computed effective electrical conductivity of the CNT/polymer shows a very good agreement with experimental results from the literature, something which validates the proposed electrical modeling approach. The model of the CNT/composite shows a large sensitivity on the presence of the crack. The model with the carbon fibers shows a more homogeneous electrical response compared to the model with the glass fibers which is due to the conductive nature of carbon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. Boller, Why SHM? A Motivation, NATO Lecture Series STO-MP-AVT-220 Structural Health Monitoring of Military Vehicles: STO Educational Notes, 2014.
2. Finite element modeling of single-walled carbon nanotubes10.1016/j.compositesb.2004.10.003 ↗
3. Equivalent beams for carbon nanotubes10.1016/j.commatsci.2007.12.010 ↗
4. A progressive fracture model for carbon nanotubes10.1016/j.compositesb.2006.02.024 ↗
5. The effect of Stone-Wales defect on the tensile behavior and fracture of single-walled carbon nanotubes10.1016/j.compstruct.2006.02.020 ↗
6. Thermal transport measurements of individual multiwalled nanotube10.1103/PhysRevLett.87.215502 ↗
7. Electrical conductivity of individual carbon nanotubes10.1038/382054a0 ↗
8. Can carbon nanotubes be used to sense damage in composites?10.3166/acsm.29.6.81-94 ↗
9. Electrical characterization and modeling of carbon nanotube and carbon fiber self-sensing composites for enhanced sensing of microcracks10.1016/j.mtcomm.2015.01.009 ↗
10. Strain sensing in composites using aligned carbon nanotube sheets embedded in the interlaminar region10.1016/j.compositesa.2016.08.003 ↗
11. Modeling of damage sensing in fiber composites using carbon nanotube networks10.1016/j.compscitech.2008.09.025 ↗
12. Electrical resistance-based strain sensing in carbon nanotube/polymer composites under tension: analytical modeling and experiments10.1016/j.compscitech.2012.07.001 ↗
13. Tensile behavior of carbon nanotube/polypropylene composite material10.1179/1743289814Y.0000000108 ↗
14. Influence of non-bonded interphase on crack driving force in carbon nanotube reinforced polymer10.1016/j.commatsci.2011.12.025 ↗
15. Characterizing nanotube–polymer interaction using molecular dynamics simulation10.1016/j.commatsci.2015.10.041 ↗
16. Multi-scale modeling of carbon nanotube reinforced polymers using irregular tessellation technique10.1016/j.mechmat.2014.07.021 ↗
17. Development of a full range multi-scale model to obtain elastic properties of CNT/polymer composites10.1007/s13726-012-0043-0 ↗
18. Prediction of yield strength of MWCNT/PP nanocomposite considering the interphase and agglomeration10.1016/j.compstruct.2017.02.042 ↗
19. Finite element modeling of carbon nanotube agglomerates in polymers10.1016/j.compstruct.2015.07.033 ↗
20. Griffiths · 1990
21. Haus · 1989
22. ANSYS User's manual, Version 11, Swanson Analysis Systems, Pittsburgh, PA, USA, 2008.
23. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites10.1016/j.compositesa.2012.12.008 ↗
24. Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites10.1016/j.polymer.2006.01.029 ↗