Space-time asymptotic expansion method for transient thermal conduction in the periodic composite with temperature-dependent thermal properties
Source abstract
Abstract
Abstract Space-time asymptotic expansion method (AEM) is a rigorous method for solving the multiscale transient thermal conduction problem in periodic composites. However, the AEM is still difficult to model the thermal behavior in composites when temperature-dependent material properties are taken into account. Besides, its complex and costly implementation also restricts the usage of AEM. A space–time AEM for multiscale transient thermal analysis is comprehensively studied in this study to address these issues properly. After the constitutive equation of temperature-dependent characteristic temperature tensor and effective thermal properties in the transient thermal conduction is deduced from the solid theoretical base, a new implementation approach comprised of both homogenization and localization is developed. It can directly model the characteristic temperature tensor within a representative volume element model under simple periodic boundary conditions and linear temperature loads, differing from conventional AEM, which requires complex location-related heat flux loads. Moreover, a new characteristic heat flux tensor is proposed to replace the characteristic temperature tensor in the localization of heat flux. All these contributions simplify the localization in the new implementation. The thermal behavior of A fiber-reinforced composite during the forming process is investigated using the space–time AEM and multiscale finite element method. The comparison results between space–time AEM and multiscale finite element method indicate that the space–time AEM is accurate and efficient as the differences of local temperature and heat flux are 0.0051 °C and 7.2 × 10-5 W/mm2, and the total nodes in space–time AEM is only about half of the multiscale finite element method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Material Mechanics · Advanced Mathematical Modeling in Engineering · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Transient heat conduction within periodic heterogeneous media: a space-time homogenization approach10.1016/j.ijthermalsci.2015.01.026 ↗
2. Experimental and numerical analyses on the thermal conductive behaviors of carbon fiber/epoxy plain woven composites10.1016/j.ijheatmasstransfer.2016.06.035 ↗
3. Comparison of four multiscale methods for elliptic problems
4. Variational asymptotic homogenization of temperature-dependent heterogeneous materials under finite temperature changes10.1016/j.ijsolstr.2012.05.006 ↗
5. Multi-site micromechanics of composite materials with temperature-dependent constituents under small strain and finite thermal perturbation assumptions10.1016/j.compstruct.2014.07.014 ↗
6. Abaqus 6.14 Analysis User’s Manual, Dassault Systèmes Simulia Corp. (2014).
7. Practical implementation of asymptotic expansion homogenisation in thermoelasticity using a commercial simulation software10.1016/j.compstruct.2016.01.036 ↗
8. Modeling of thermophysical properties in heterogeneous periodic media according to a multi-scale approach: Effective conductivity tensor and edge effects10.1016/j.ijheatmasstransfer.2013.03.036 ↗
9. Numerical evaluation of the thermomechanical effective properties of a functionally graded material using the homogenization method10.1016/j.ijsolstr.2008.02.012 ↗
10. A micro/macro homogenization approach for viscoelastic creep analysis with dissipative correctors for heterogeneous woven-fabric layered media10.1016/S0266-3538(00)00018-X ↗
11. A finite element thermo-viscoelastic creep approach for heterogeneous structures with dissipative correctors10.1016/S0168-874X(00)00037-8 ↗
12. Homogenization of transient heat transfer problems for some composite materials10.1016/S0020-7225(02)00144-1 ↗
13. Toward realization of computational homogenization in practice10.1002/nme.2074 ↗
14. A novel implementation algorithm of asymptotic homogenization for predicting the effective coefficient of thermal expansion of periodic composite materials10.1007/s10409-016-0618-7 ↗
15. A novel implementation of asymptotic homogenization for viscoelastic composites with periodic microstructures10.1016/j.compstruct.2018.09.056 ↗
16. Extended multiscale FE approach for steady-state heat conduction analysis of 3D braided composites10.1016/j.compscitech.2017.08.030 ↗
17. Homogenization of temperature-dependent thermal conductivity in composite materials10.2514/2.6590 ↗
18. Micromechanics models for viscoelastic plain-weave composite tape springs10.2514/1.J055041 ↗
19. Q. Wu, T. Ogasawara, N. Yoshikawa, H. Zhai, Stress evolution of amorphous thermoplastic plate during forming process, Materials (Basel). 11 (2018) 464(1–18).10.3390/ma11040464 ↗
20. A review of homogenization and topology optimization I—homogenization theory for media with periodic structure10.1016/S0045-7949(98)00131-X ↗
21. A review of homogenization and topology optimization II—analytical and numerical solution of homogenization equations10.1016/S0045-7949(98)00132-1 ↗
22. Q. Wu, H. Zhai, N. Yoshikawa, T. Ogasawara, Localization simulation of a representative volume element with prescribed displacement boundary for investigating the thermal residual stresses of composite forming, Compos. Struct. 235 (2020) 111723(1–10).10.1016/j.compstruct.2019.111723 ↗
23. Q. Wu, T. Ogasawara, N. Yoshikawa, H. Zhai, Modeling the viscoelasticity of polyetherimide, J. Appl. Polym. Sci. 135 (2018) 46102(1–7).10.1002/app.46102 ↗