Modeling the microstructure evolution during quenching & partitioning of a conventional CrMo alloy steel
Source abstract
Abstract
This work presents the simulation approach on the phase transformation and the microstructure evolution of a CrMo steel containing low Si processed with a typical Q&P cycle. The phase transformations at all steps of the Q&P were modelled using kinetics modelling and phase field model in order to predict the austenite grain size, the subsequent fraction and size of microstructural constituents. The initial austenite grain size was predicted considering the solute drag effect due to the presence of Cr obtained from kinetics simulation. The results showed that the austenite grain growth is restricted due to solute drag effect of Cr revealing that the heating stage is important for estimating the austenitic grain size. During quenching, the fraction of initial martensite was predicted. The results were aligned with dilatometry data indicating that the martensite fraction can be predicted via the phase field method. At the partitioning stage, the carbon content in the microstructural constituents determines the fraction of bainitic ferrite and retained austenite at the end of partitioning. In order to predict accurately the carbon content in the microstructure, it is important to simulate the carbon diffusion in the 2nd heating and prior to bainitic transformation. The results showed that the remaining austenite is enriched in carbon. During bainitic transformation, carbon atoms diffuse from bainitic ferrite sheaves towards austenite. By the time C concentration in austenite increases up to para – equilibrium value, austenite is stabilized. Due to fine PAGBs, the enrichment of retained austenite in C can be accelerated; thus smaller partition time can be applied for the stabilization of austenite and to complete the partitioning stage. Phase field results were in agreement with SEM/EBSD results showing that phase transformations can be predicted at all stages of Q&P process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation10.1016/j.cossms.2004.09.003 ↗
2. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
3. Overview of mechanisms involved during the quenching and partitioning process in steels10.1007/s11661-011-0706-z ↗
4. A general equation prescribing the extent of the austenite - martensite transformation in pure iron - carbon alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
5. Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning10.1016/j.scriptamat.2009.03.021 ↗
6. Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel10.1016/j.msea.2014.07.054 ↗
7. Effect of partial and full austenitisation on microstructure and mechanical properties of quenching and partitioning steel10.1016/j.msea.2016.08.094 ↗
8. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling10.1016/j.actamat.2005.08.017 ↗
9. Model for the interaction between interface migration and carbon diffusion during annealing of martensite–austenite microstructures in steels10.1016/j.scriptamat.2008.02.045 ↗
10. Influence of interface migration during annealing of martensite/austenite mixtures10.1080/09500830701194173 ↗
11. Incomplete carbon partitioning during quenching and partitioning of Fe–C–Mn–Si steels: Modeling and experimental validations10.1016/j.actamat.2020.09.045 ↗
12. Revealing carbide precipitation effects and their mechanisms during quenching-partitioning-tempering of a high carbon steel: Experiments and Modeling
13. Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels10.1016/j.mser.2015.03.001 ↗
14. CALPHAD and phase-field modeling: a successful liaison10.1007/s11669-006-9009-2 ↗
15. Phase field modelling of the interfacial condition at the moving interphase during the γ → α transformation in C–Mn steels10.1016/j.commatsci.2005.03.002 ↗
16. Three-dimensional phase field modelling of the austenite-to-ferrite transformation10.1016/j.actamat.2006.04.029 ↗
17. Phase-field simulation of martensite microstructure in low-carbon steel10.1016/j.actamat.2019.06.036 ↗
18. A phase-field model for incoherent martensitic transformations including plastic accommodation processes in the austenite10.1016/j.jmps.2011.07.001 ↗
19. Multiphase-field simulation of cementite precipitation during isothermal lower bainitic transformation
20. Phase field simulation of the carbon redistribution during the quenching and partitioning process in a low carbon steel10.1016/j.actamat.2012.01.055 ↗
21. Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low - alloy steels10.1016/j.commatsci.2015.10.048 ↗
22. Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition10.1016/j.commatsci.2018.12.023 ↗
23. On the role of chemical heterogeneity in phase transformations and mechanical behavior of flash annealed quenching & partitioning steels10.1016/j.actamat.2020.10.007 ↗
24. Analysis of interface migration and isothermal martensite formation for quenching and partitioning process in a low-carbon steel by phase field modeling10.1088/1361-651X/ab3608 ↗
25. A phase-field model for bainitic transformation10.1016/j.commatsci.2013.04.044 ↗
26. Simulation of lower bainitic transformation with the phase-field method considering carbide formation10.1016/j.commatsci.2015.08.043 ↗
27. Summary of the present diffusionist views on bainite10.2320/matertrans1989.32.737 ↗
28. Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application
29. J. Eiken, A Phase-field Model for Technical Alloy Solidification, Gießerei-Institut: Forschung, Entwicklung, Ergebnisse, Aachen, 2010.
30. Austenite grain growth simulation considering the solute-drag effect and pinning effect10.1080/14686996.2016.1244473 ↗
31. Elastoplastic phase-field simulation of self- and plastic accommodations in Cubic → tetragonal martensitic transformation10.1016/j.msea.2008.02.035 ↗
32. A phase-field model for the formation of martensite and bainite10.4028/www.scientific.net/AMR.922.31 ↗
33. Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding10.1016/j.commatsci.2012.09.009 ↗
34. Bainite Formation in Medium-Carbon Low-Silicon Spring Steels Accounting for Chemical Segregation10.1007/s11661-016-3418-6 ↗
35. Multi phase field model for solid state transformation with elastic strain10.1016/j.physd.2006.04.001 ↗
36. V. Giurgiutiu, “Chapter 2 - Fundamentals of Aerospace Composite Materials,” in Structural Health Monitoring of Aerospace Composites, Academic Press, 2016, pp. 25-65.10.1016/B978-0-12-409605-9.00002-7 ↗
37. Phase-Field Study of Microstructure and Plasticity in Polycrystalline MnNi Shape Memory Alloys10.1007/s11661-018-4937-0 ↗
38. A model for the prediction of lattice parameters of iron–carbon austenite and martensite10.1016/j.jallcom.2005.10.075 ↗
39. A phase field model for martensitic transformation coupled with the heat equation
40. Bainite in Steels
41. Features of Bainite Transformation
42. A Check of the I.P.S. Theory with the Aid of an Accurate Determination of Habit Planes and Orientation Relantionships in Bainitic Steels10.1016/0001-6160(80)90141-8 ↗
43. Phase field modeling of the simultaneous formation of bainite and ferrite in TRIP steels10.1016/j.actamat.2017.11.047 ↗
44. A revised expression for the diffusivity of carbon in binary Fe-C austenite10.1016/0036-9748(86)90384-4 ↗
45. Computer simulations of the austenite/ferrite diffusional transformations in low alloyed steels10.1016/0001-6160(82)90082-7 ↗
46. DICTRA, a Tool for Simulation of Diffusional Transformations in Alloys10.1361/105497100770340057 ↗
47. Effect of Ultra-Fast Heat Treatment on the Subsequent Formation of Mixed Martensitic/Bainitic microstructure with Carbides in a CrMo Medium Carbon Steel
48. “https://micress.rwth-aachen.de/,” [Online].
49. Z. Jiang, J. Zhao and H. Xie, “Chapter 6 - Simulation Models in Microforming,” in Microforming Technology: Theory, Simulation, Practice, Academic Press, 2017, pp. 111-130.10.1016/B978-0-12-811212-0.00006-6 ↗
50. Greenwood · 1997
51. Atomic Mechanism of the Bainite Transformation10.3139/105.110338 ↗
52. Deformation and Fracture in Martensitic Carbon Steels Tempered at Low Temperatures10.1007/s11661-001-0344-y ↗
53. Nucleation and critical nucleus of martensite phase transformation
54. Carbon content of bainite ferrite in 40CrMnSiMoV steel10.1016/j.matchemphys.2009.08.014 ↗
55. Nucleation Mechanism of Pearlite, Bainite and Martensite10.12677/MS.2013.32014 ↗
56. Influence of interface mobility on the evolution of austenite–martensite grain assemblies during annealing10.1016/j.actamat.2009.06.024 ↗
57. Calculation of the Interfacial Energies between α and γ iron10.1007/s11661-006-0066-2 ↗
58. Kinetics and Morphology of Isothermal Transformations at Intermediate Temperature in 15CrMnMoV steel10.2320/matertrans.MRA2008194 ↗
59. Cubic elasticity and stress distribution at the free surface of polycrystals10.1016/j.actamat.2006.09.035 ↗
60. Experimental and atomistic study of the elastic properties of α′ Fe–C martensite10.1016/j.actamat.2012.05.038 ↗
61. Mechanical Properties of Low - Temperature Bainite10.4028/www.scientific.net/MSF.500-501.495 ↗
62. Conversional model of transformation strain to phase fraction in low alloy steels10.1016/j.actamat.2006.09.008 ↗
63. Study of Carbide Dissolution and Austenite Formation during Ultra - Fast Heating in Medium Carbon Chromium Molybdenum Steel
64. Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel10.1016/j.msea.2016.09.087 ↗
65. Interaction of martensite and bainite transformations and its dependence on quenching temperature in intecritical quenching and partitioning steels