The Kinetics of De-agglomeration of Magnesium Stearate Dry-Coated Salbutamol Sulphate Powders
Source abstract
Abstract
The objective was to investigate the effect of dry coating of salbutamol sulphate (SS) with magnesium stearate (MgSt) on the kinetics of powder de-agglomeration. The relative de-agglomeration of the MgSt coated SS powders was higher than uncoated SS at all air flow rates; the SS coated with 2 % MgSt showed the highest extent of de-agglomeration (> 5 % MgSt coated SS > 1 % MgSt coated SS). Rate of de-agglomeration was described by a cumulative de-agglomerated versus time profile. Profiles fitted a mono-exponential model and the de-agglomeration rate constant (kd) was estimated. No significant differences existed between any of the uncoated and coated powders. The significance of this study relates to the improved aerosolization and de-agglomeration performance of the MgSt coated SS powders with optimum performance of 2 % MgSt coated SS. More significant is the finding that no change existed in de-agglomeration rate constants between the coated and uncoated powders, with the potential implications that their aerosol plume concentration and deposition patterns were similar.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Inhalation and Respiratory Drug Delivery · Aerosol Filtration and Electrostatic Precipitation · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Drug Delivery, Disposition and Dynamics, Monash Institute of Pharmaceutical Sciences, Monash University, Australia
New Zealand’s National School of Pharmacy, University of Otago, New Zealand
References (30)
Show source-provided references
1. Begat P., Morton D.A.V., Shur J., Kippax P., Staniforth J.N., Price R., The role of force control agents in high-dose dry powder inhaler formulations, Journal of Pharmaceutical Sciences, 98 (2009) 2770–2783.10.1002/jps.21629 ↗
2. Behara S.R.B., Kippax P., Larson I., Morton D.A.V., Stewart P., Kinetics of emitted mass-A study with three dry powder inhaler devices, Chemical Engineering Science, 66 (2011a) 5284–5292.10.1016/j.ces.2011.07.029 ↗
3. Behara S.R.B., Larson I., Kippax P., Morton D.A.V., Stewart P., An approach to characterising the cohesive behaviour of powders using a flow titration aerosolisation based methodology, Chemical Engineering Science, 66 (2011b) 1640–1648.10.1016/j.ces.2010.12.044 ↗
4. Behara S.R.B., Larson I., Kippax P., Morton D.A.V., Stewart P., The kinetics of cohesive powder de-agglomeration from three inhaler devices, International Journal of Pharmaceutics 421 (2011c) 72–81.10.1016/j.ijpharm.2011.09.024 ↗
5. Chew N.Y.K., Chan H.K., Use of solid corrugated particles to enhance powder aerosol performance, Pharmaceutical Research, 18 (2001) 1570–1577.10.1023/A:1013082531394 ↗
6. Chew N.Y.K., Chan H.K., Bagster D.F., Mukhraiya J., Characterization of pharmaceutical powder inhalers: estimation of energy input for powder dispersion and effect of capsule device configuration, Journal of Aerosol Science, 33 (2002) 999–1008.10.1016/S0021-8502(02)00059-9 ↗
7. Coates M.S., Chan H.K., Fletcher D.F., Raper J.A., Influence of air flow on the performance of a dry powder inhaler using computational and experimental analyses, Pharmaceutical Research, 22 (2005) 1445–1453.10.1007/s11095-005-6155-x ↗
8. Das S., Behara S., Bulitta J., Morton D., Larson I., Stewart P., Powder Strength Distributions for understanding De-agglomeration of lactose powders, Pharmaceutical Research, 29 (2012) 2926–2935.10.1007/s11095-012-0799-0 ↗
9. Das S.C., Larson I., Morton D.A.V., Stewart P.J., Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography, Langmuir, 27 (2011a) 521–523.10.1021/la104135z ↗
10. Das S.C., Zhou Q., Morton D.A.V., Larson I., Stewart P.J., Use of surface energy distributions by inverse gas chromatography to understand mechanofusion processing and functionality of lactose coated with magnesium stearate, European Journal of Pharmaceutical Sciences, 43 (2011b) 325–333.10.1016/j.ejps.2011.05.012 ↗
11. De Boer A.H., Hagedoorn P., Gjaltema D., Lambregts D., Irngartinger M., Frijlink H.W., The rate of drug particle detachment from carrier crystals in an air classifier-based inhaler. Pharmaceutical Research, 21 (2004) 2158–2166.10.1007/s11095-004-7668-4 ↗
12. Devilliers M.M., Description of the kinetics of the deagglomeration of drug particle agglomerates during powder mixing, International Journal of Pharmaceutics, 151 (1997) 1–6.10.1016/S0378-5173(97)04893-X ↗
13. Ding P., Pacek A.W., De-agglomeration of silica nanoparticles in the presence of surfactants, Journal of Dispersion Science and Technology, 29 (2008) 593–599.10.1080/01932690701729302 ↗
14. Draper N., Smith H., Applied regression analysis, John wiley and Sons, New York, 1981.
15. Gonda I., Aerosols for delivery of therapeutic and diagnostic agents to the respiratory tract, Crit Rev Ther Drug Carrier Syst, 6 (1990) 273–313.
16. Islam N., Stewart P., Larson I., Hartley P., Lactose surface modification by decantation: Are drug-fine lactose ratios the key to better dispersion of salmeterol xinafoate from lactose-interactive mixtures? Pharmaceutical Research, 21 (2004) 492–499.10.1023/B:PHAM.0000019304.91412.18 ↗
17. Kendall K., Stainton C., Adhesion and aggregation of fine particles, Powder Technology, 121 (2001) 223–229.10.1016/S0032-5910(01)00386-2 ↗
18. Louey M.D., Stewart P.J., Particle interactions involved in aerosol dispersion of ternary interactive mixtures, Pharmaceutical Research, 19 (2002) 1524–1531.10.1023/A:1020464801786 ↗
19. Marquardt D., An algorithm for least-squares estimation of nonlinear parameters, J So Ind Appl Math, 11 (1963) 431–441.10.1137/0111030 ↗
20. Martinez M.N., Amidon G.L., A mechanistic approach to understanding the factors affecting drug absorption: A review of fundamentals, J Clin Pharmacol, 42 (2002) 620–643.10.1177/00970002042006005 ↗
21. Pfeffer R., Dave R.N., Wei D.G., Ramlakhan M., Synthesis of engineered particulates with tailored properties using dry particle coating, Powder Technology, 117 (2001) 40–67.10.1016/S0032-5910(01)00314-X ↗
22. Qui Y., Adjei A.L., Gupta P.K., Absorption and bioavailability of inhaled peptides and proteins, in: Adjei A.L., Gupta P.K. (Eds.), Inhalation delivery of Therapeutic Peptides and Proteins, Mercel Dekker, Inc., New York, 1997.
23. Srichana T., Martin G.P., Marriott C., On the relationship between drug and carrier deposition from dry powder inhalers in vitro, International Journal of Pharmaceutics, 167 (1998) 13–23.10.1016/S0378-5173(98)00037-4 ↗
24. Vanoss C.J., Good R.J., Chaudhury M.K., Additive and nonadditive surface tension components and the interpretation of contact angles, Langmuir, 4 (1988) 884–891.10.1021/la00082a018 ↗
25. Visser J., Vanderwaals and Other Cohesive Forces Affecting Powder Fluidization, Powder Technology, 58 (1989) 1–10.10.1016/0032-5910(89)80001-4 ↗
26. Xu Z., Mansour H.M., Hickey A.J., Particle Interactions in Dry Powder Inhaler Unit Processes: A Review, Journal of Adhesion Science and Technology, 25 (2011) 451–482.10.1163/016942410X525669 ↗
27. Zeng X.M., Martin G.P., Tee S.K., Marriott C., The role of fine particle lactose on the dispersion and deaggregation of salbutamol sulphate in an air stream in vitro, International Journal of Pharmaceutics, 176 (1998) 99–110.10.1016/S0378-5173(98)00300-7 ↗
28. Zhou Q., Qu L., Gengenbach T., Denman J.A., Larson I., Stewart P.J., Morton D.A.V., Investigation of the extent of surface coating via mechanofusion with varying additive levels and the influences on bulk powder flow properties, International Journal of Pharmaceutics, 413 (2011) 36–43.10.1016/j.ijpharm.2011.04.014 ↗
29. Zhou Q.T., Armstrong B., Larson I., Stewart P.J., Morton D.A.V., Understanding the influence of powder flowability, fluidization and de-agglomeration characteristics on the aerosolization of pharmaceutical model powders, European Journal of Pharmaceutical Sciences, 40 (2010a) 412–421.10.1016/j.ejps.2010.04.012 ↗
30. Zhou Q.T., Qu L., Larson I., Stewart P.J., Morton D.A.V., Improving aerosolization of drug powders by reducing powder intrinsic cohesion via a mechanical dry coating approach, International Journal of Pharmaceutics, 394 (2010b) 50–59.10.1016/j.ijpharm.2010.04.032 ↗