journal article·2024-02-01Open access

Influence of Addition of Ti Particles and Processing Condition on Microstructure and Properties of Selectively Laser-Melted Invar 36 Alloy

Huanhuan Liu, Xingyu Pan, Pengyue Sun, Yanjun Liu, Chunlei Qiu

Abstract

Invar 36 exhibits extremely low thermal expansion coefficients at low temperatures but also low yield strength (YS), which greatly restricts its application as a structural material. In this study, a small fraction of pure titanium powder particles was added into Invar 36 by powder mixing and selective laser melting (SLM) with the aim of further improving tensile strengths of Invar 36. It was found that increased laser power led to increased grain size and to slight decrease in YS in Invar 36. During SLM, amorphous SiO 2 nanoparticles were formed and homogeneously distributed in Invar 36. With the addition of 2 at% Ti powder particles, grains became larger and the crystallographic texture along <001> and <111> increased to some extent. Moreover, the bottom of solidified melt pools was segregated with Ti while the matrix was homogeneously decorated by a great number of nano-sized spherical Ti 2 O 3 particles. These particles were found to have effectively impeded dislocation motion during plastic deformation, leading to significant improvement in 0.2% YS and ultimate tensile strength. The above precipitation led to consumption of a small amount of Ni from the matrix, which caused a minor compromise in thermal expansion properties. Nonetheless, the newly synthesized Invar 36-Ti alloy still exhibits low thermal expansion coefficients at low temperatures and remarkably enhanced tensile strengths.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Beihang University, Beijing, China.

References (45)

Show source-provided references
1. 10.1038/071134a010.1038/071134a0 ↗
2. 10.1038/131658c010.1038/131658c0 ↗
3. 10.1016/j.actamat.2016.10.05410.1016/j.actamat.2016.10.054 ↗
4. Committee AH. Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. Ohio: ASM International 1990.
5. F1684-06. Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications. West Conshohocken PA ASTM International 2021.
6. 10.1016/j.actamat.2015.10.02010.1016/j.actamat.2015.10.020 ↗
7. 10.1016/j.addma.2020.10160310.1016/j.addma.2020.101603 ↗
8. 10.1016/j.jmatprotec.2018.11.00610.1016/j.jmatprotec.2018.11.006 ↗
9. 10.1016/j.msea.2019.13879910.1016/j.msea.2019.138799 ↗
10. 10.1016/j.optlastec.2018.08.01310.1016/j.optlastec.2018.08.013 ↗
11. 10.1016/j.optlastec.2019.10603710.1016/j.optlastec.2019.106037 ↗
12. 10.1016/j.matdes.2018.10.02510.1016/j.matdes.2018.10.025 ↗
13. 10.1016/j.addma.2018.09.03510.1016/j.addma.2018.09.035 ↗
14. 10.1016/j.matchar.2020.11040910.1016/j.matchar.2020.110409 ↗
15. 10.1007/s10853-017-1169-410.1007/s10853-017-1169-4 ↗
16. 10.1007/s13632-013-0101-910.1007/s13632-013-0101-9 ↗
17. 10.1016/j.mtla.2019.10047410.1016/j.mtla.2019.100474 ↗
18. 10.2320/jinstmet.J201305310.2320/jinstmet.J2013053 ↗
19. 10.1016/0956-716X(95)00433-V10.1016/0956-716X(95)00433-V ↗
20. 10.1016/1044-5803(92)90103-O10.1016/1044-5803(92)90103-O ↗
21. 10.1016/0001-6160(75)90139-X10.1016/0001-6160(75)90139-X ↗
22. Qiu CL, , Liu YJ, , Liu HH. Influence of addition of TiAl particles on microstructural and mechanical property development in Invar 36 processed by laser powder bed fusion. Addit Manuf, 2021; 48:102457.
23. Qiu CL, , Liu Q. Multi-scale microstructural development and mechanical properties of a selectively laser melted beta titanium alloy. Addit Manuf, 2019; 30:100893.
24. 10.1063/1.166266110.1063/1.1662661 ↗
25. 10.1016/S0022-3697(71)80339-610.1016/S0022-3697(71)80339-6 ↗
26. 10.1016/j.jallcom.2014.12.23410.1016/j.jallcom.2014.12.234 ↗
27. Committee AH. Properties and Selection: Irons Steels and High Performance Alloy. Ohio: ASM International 1990.
28. 10.1103/PhysRevB.85.11510410.1103/PhysRevB.85.115104 ↗
29. 10.1038/s41598-018-26136-710.1038/s41598-018-26136-7 ↗
30. 10.1016/j.jallcom.2019.03.22110.1016/j.jallcom.2019.03.221 ↗
31. Liu Q, , Wang G, , Qiu CL. On the role of dynamic grain movement in deformation and mechanical anisotropy development in a selectively laser melted stainless steel. Addit Manuf, 2020; 35:101329.
32. 10.1016/j.actamat.2015.06.00410.1016/j.actamat.2015.06.004 ↗
33. 10.1016/j.actamat.2016.02.01410.1016/j.actamat.2016.02.014 ↗
34. 10.1016/j.actamat.2017.02.02510.1016/j.actamat.2017.02.025 ↗
35. 10.1016/j.actamat.2011.12.00910.1016/j.actamat.2011.12.009 ↗
36. 10.1016/j.matdes.2013.05.07010.1016/j.matdes.2013.05.070 ↗
37. 10.1016/0001-6160(63)90213-X10.1016/0001-6160(63)90213-X ↗
38. 10.1016/j.actamat.2013.06.01810.1016/j.actamat.2013.06.018 ↗
39. 10.1016/j.jmst.2020.07.03810.1016/j.jmst.2020.07.038 ↗
40. 10.1016/j.actamat.2015.08.07610.1016/j.actamat.2015.08.076 ↗
41. 10.1016/j.actamat.2012.09.03610.1016/j.actamat.2012.09.036 ↗
42. 10.1016/j.intermet.2014.06.01510.1016/j.intermet.2014.06.015 ↗
43. 10.1143/JPSJ.34.92510.1143/JPSJ.34.925 ↗
44. 10.1143/JPSJ.31.136610.1143/JPSJ.31.1366 ↗
45. 10.1103/PhysRevB.6.425010.1103/PhysRevB.6.4250 ↗