journal article·2024-06-01Open access

Assessing the Dispersion Stability of Antimicrobial Fillers in Photosensitive Resin for Vat Polymerization 3D Printing

Alice Shannon, Aidan O'Sullivan, Kevin J. O'Sullivan, Seamus Clifford, Leonard O'Sullivan

Abstract

Polymers are widely used in healthcare due to their biocompatibility and mechanical properties; however, the use of polymers in medical products can promote biofilm formation, which can be a source of hospital-acquired infections. Due to this, there is a rising demand for inherently antimicrobial polymers for devices in contact with patients. 3D printing as a manufacturing technology has increased exponentially in recent years. Surgical guides, orthotics, and prosthetics, among other medical devices, created by vat polymerization have been used in hospitals to treat patients. Biocompatible resins are available for these applications, but there is a lack of antimicrobial resins, which would further improve the technology for clinical use. The focus of this study was to assess settling of candidate antimicrobial metal and metal oxide fillers in vat polymerization resin to determine which fillers were compatible with the resin. Dispersion stability was assessed by measuring settling over the maximum print duration of the medium priced desktop 3D printers to evaluate printability of 17 potentially antimicrobial resins. Eight materials displayed settling behavior during the test period: molybdenum oxide, zirconium oxide nanopowder, scandium oxide, zirconium oxide, titanium oxide, tungsten oxide, lanthanum oxide, and magnesium oxide. No settling was observed for manganese oxide, magnesium oxide nanopowder, titanium oxide nanopowder, copper oxide, silver oxide, zinc oxide nanopowder, zinc oxide, silver nanopowder, and gold nanopowder during the test period. This method could be applied to assess settling of other fillers introduced into 3D printing resins before actual printing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Anatomy and Medical Technology · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Rapid Innovation Unit, Confirm Centre for Smart Manufacturing, Health Research Institute, University of Limerick, Limerick, Ireland.

National Childrens Research Centre, Dublin, Ireland.

School of Engineering, Faculty of Science and Engineering, University of Limerick, Limerick, Ireland.

References (30)

Show source-provided references
1. Czuba L. Application of plastics in medical devices and equipment. In: Handbook of Polymer Applications in Medicine and Medical Devices. Elsevier: USA; 2014; pp. 9–19.10.1016/B978-0-323-22805-3.00002-5 ↗
2. 10.1016/j.matchemphys.2007.09.00210.1016/j.matchemphys.2007.09.002 ↗
3. 10.3390/bioengineering902005110.3390/bioengineering9020051 ↗
4. 10.2174/138161282466618021913065910.2174/1381612824666180219130659 ↗
5. 10.1177/095441191245182610.1177/0954411912451826 ↗
6. 10.1089/3dp.2020.032410.1089/3dp.2020.0324 ↗
7. Mubarak S, , Dhamodharan D B. Kale M, et al. A novel approach to enhance mechanical and thermal properties of SLA 3D printed structure by incorporation of metal–metal oxide nanoparticles. Nanomaterials, 2020; 10(2):217.
8. 10.1016/j.addma.2021.10247310.1016/j.addma.2021.102473 ↗
9. 10.3390/ijms2304229610.3390/ijms23042296 ↗
10. Guttridge C, , Shannon A, , O'Sullivan A, et al. Biocompatible 3D printing resins for medical applications: A review of marketed intended uses, biocompatibility certification, and post-processing guidance. Ann 3D Print Med, 2021; 100044.
11. 10.3390/nano907104910.3390/nano9071049 ↗
12. Horst DJ, , Tebcherani SM, , Kubaski ET, et al. Bioactive potential of 3D-printed oleo-gum-resin disks: B. papyrifera, C. myrrha, and S. benzoin Loading Nanooxides—TiO2, P25, Cu2O, and MoO3. Bioinorg Chem Applicat, 2017; 2017:6398167.
13. 10.3390/ma1112244410.3390/ma11122444 ↗
14. 10.1007/s10853-018-2801-710.1007/s10853-018-2801-7 ↗
15. 10.1016/j.jeurceramsoc.2021.08.02910.1016/j.jeurceramsoc.2021.08.029 ↗
16. 10.1016/j.msec.2019.11005410.1016/j.msec.2019.110054 ↗
17. 10.1016/j.addma.2021.10259010.1016/j.addma.2021.102590 ↗
18. 10.1108/RPJ-03-2017-004110.1108/RPJ-03-2017-0041 ↗
19. 10.1016/j.powtec.2018.07.02310.1016/j.powtec.2018.07.023 ↗
20. 10.1016/j.matdes.2019.10796010.1016/j.matdes.2019.107960 ↗
21. 10.1007/s11814-010-0139-110.1007/s11814-010-0139-1 ↗
22. 10.2166/wst.2018.31510.2166/wst.2018.315 ↗
23. 10.1016/j.compositesa.2022.10692910.1016/j.compositesa.2022.106929 ↗
24. 10.2341/18-229-L10.2341/18-229-L ↗
25. Systems D. LC-3DMixer Productsheet. 2022. support.3dsystems.com [Last accessed: July 21 2022].
26. 10.1089/3dp.2019.016010.1089/3dp.2019.0160 ↗
27. 10.1177/0954411922108481910.1177/09544119221084819 ↗
28. 10.3390/polym1002021210.3390/polym10020212 ↗
29. 10.1016/j.jmbbm.2015.08.01810.1016/j.jmbbm.2015.08.018 ↗
30. Hunter RJ. Foundations of Colloid Science. Oxford University Press: New York USA; 2001.