journal article·2012-07

MICROSTRUCTURAL ALTERATION AND MICROHARDNESS AT NEAR-SURFACE OF AISI H13 STEEL BY HARD MILLING

S. Zhang, T. C. Ding, J. F. Li

Machining Science and Technology· Volume 16· Issue 3
Publisher page

Abstract

In the present research, the microstructural alteration and microhardness at near-surface of AISI H13 steel by hard milling under different cutting parameters with coated cutting tools have been investigated. Very thin white layer forms or even no obvious microstructural alteration layer appears at the near-surface. It is reasonable that the formation of the very thin white layer is primarily due to mechanical effect (severe plastic deformation) rather than thermal effect (rapid heating and quenching). The ‘hook’ shape of the microhardness profile indicates that the highest microhardness appears on the very top surface; while the smallest microhardness occurs at the depth of 25 µm below the machined surface. Moreover, the microhardness profiles below the machined surfaces well correlate with the microstructural change of the machined near-surface. It is expected that the experimental results will provide a useful guide to control or minimize the white layer formation and, more significantly, to promote the application of hard milling technique in die and mold industry.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Akcan S. · Metallurgical and Materials Transactions A · 2002 · 33 · 124510.1007/s11661-002-0225-z ↗
2. Aramcharoen A. · International Journal of Advanced Manufacturing Technology · 2008 · 36 · 65010.1007/s00170-006-0899-2 ↗
3. Axinte D.A. · Journal of Materials Processing Technology · 2002 · 127 · 32510.1016/S0924-0136(02)00282-0 ↗
4. Barbacki A. · Journal of Materials Processing Technology · 2003 · 133 · 2110.1016/S0924-0136(02)00211-X ↗
5. Bosheh S.S. · International Journal of Machine Tools & Manufacture · 2006 · 46 · 22510.1016/j.ijmachtools.2005.04.009 ↗
6. Chou Y.K. · International Journal of Machine Tools & Manufacture · 1999 · 39 · 186310.1016/S0890-6955(99)00036-X ↗
7. Dolinšek S. · Journal of Materials Processing Technology · 2004 · 157 · 48510.1016/j.jmatprotec.2004.07.144 ↗
8. Elbestawi M.A. · CIRP Annals · 1997 · 46 · 5710.1016/S0007-8506(07)60775-6 ↗
9. Field , M. ; Koster , W.P. ; Kohls , J.B. ; Snider , R.E. ; Maranchik , J. Jr ( 1970 )Machining of high strength steels with emphasis on surface integrity. Technical Report AFMDC 70–1, Air Force Machinability Data Center, Cincinnati, USA.
10. Ghanem F. · Journal of Materials Processing Technology · 2003 · 142 · 16310.1016/S0924-0136(03)00572-7 ↗
11. Griffiths B.J. · Transactions of the ASME, Journal of Tribology · 1985 · 107 · 16510.1115/1.3261015 ↗
12. Griffiths B.J. · Transactions of the ASME, Journal of Tribology · 1987 · 109 · 52510.1115/1.3261495 ↗
13. Guo Y.B. · International Journal of Machine Tools & Manufacture · 2004 · 44 · 13510.1016/j.ijmachtools.2003.10.009 ↗
14. Kim W. · Transactions of the ASME, Journal of Manufacturing Science and Engineering · 2002 · 124 · 65910.1115/1.1473145 ↗
15. Longbottom J.M. · Aircraft Engineering and Aerospace Technology · 2005 · 77 · 12210.1108/00022660510585956 ↗
16. Pang J.Z. · Advanced Materials Research · 2007 · 24 · 4510.4028/www.scientific.net/AMR.24-25.45 ↗
17. Rahman M. · JSME International Journal, Series C · 2006 · 49 · 1110.1299/jsmec.49.11 ↗
18. Ramesh A. · 2002
19. Ramesh A. · Materials Science and Engineering A · 2005 · 390 · 8810.1016/j.msea.2004.08.052 ↗
20. Sauvage X. · Materials Science and Engineering A · 2003 · 362 · 18110.1016/S0921-5093(03)00531-8 ↗
21. Shaw M.C. · CIRP Annals · 1994 · 43 · 27910.1016/S0007-8506(07)62213-6 ↗
22. Töenshoff H.K. · Transactions of NAMRI/SME · 1995 · 23 · 215
23. Warren A.W. · Gear solutions · 2007 · 45