journal article·2015-01-02

Fluid-Like Properties of Chip Flow in High-Speed Metal Cutting Process

Keguo Zhang, Zhanqiang Liu, Yi Wan, Bing Wang, Xing Ai

Machining Science and Technology· Volume 19· Issue 1
Publisher page

Abstract

Strain rate in high-speed metal cutting is high, and properties of chip flow under high strain rate conditions are different under low cutting speed conditions. Shear stress and shear strain rate have a linear relationship; hence, the behavior of chip flow during high-speed metal cutting is more similar to fluid than to solid. Therefore, metal cutting should be analyzed by using fluid analytical method. This article investigated the fluid-like properties of chip flow during high-speed metal cutting and determined velocity, pressure, and strain rate distributions on rake face and shear plane. A speed stagnation point is located some distance from the tool tip on the rake face. The location of this point influences the life of the cutting tool and the quality of the finished surface. The pressure peaks, decreases along the rake face, and then reaches zero at some point away from the tool tip. This point represents the separation of the chip from the tool. The total stress on the shear plane is the sum of tensile stress, pressure stress, and shear stress. The strain rate is related to velocity; its value rapidly increases at the tool tip and the free surface corner and then decreases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shandong University, Jinan, China

,

References (27)

Show source-provided references
1. 10.1016/j.actamat.2011.09.05510.1016/j.actamat.2011.09.055 ↗
2. 10.1016/j.cirp.2013.05.00610.1016/j.cirp.2013.05.006 ↗
3. 10.1016/S0890-6955(01)00129-810.1016/S0890-6955(01)00129-8 ↗
4. 10.1080/1478643700823839710.1080/14786437008238397 ↗
5. 10.1016/0043-1648(87)90221-310.1016/0043-1648(87)90221-3 ↗
6. Ernst, H.; Merchant, M.E. (1941) Chip formation, friction and high quality machined surfaces, Transactions of American Society for Metals, 29: 299–378.
7. 10.1016/j.actamat.2011.03.07610.1016/j.actamat.2011.03.076 ↗
8. Guy, A.G. (1976) Essentials of Materials Science. McGraw-Hill, Inc., New York, 468.
9. 10.1007/s11661-000-1001-610.1007/s11661-000-1001-6 ↗
10. 10.1080/1091034070169686410.1080/10910340701696864 ↗
11. 10.1080/1091034070169691410.1080/10910340701696914 ↗
12. Khludkova, A.N. (1978) Plastic strain energy in ultra fast metal cutting Russian Physics Journal, 21: 1501–1502.
13. 10.1016/S0924-0136(97)00099-X10.1016/S0924-0136(97)00099-X ↗
14. 10.1016/S0007-8506(07)63128-X10.1016/S0007-8506(07)63128-X ↗
15. 10.1115/1.401035710.1115/1.4010357 ↗
16. 10.1016/S0924-0136(99)00465-310.1016/S0924-0136(99)00465-3 ↗
17. 10.1016/j.jmatprotec.2012.11.02110.1016/j.jmatprotec.2012.11.021 ↗
18. Meyers, M.A. (1994) Dynamic Behavior of Materials. John Wiley & Sons, Inc., New York, 335.10.1002/9780470172278 ↗
19. Oxley, P.L.B. (1989) Mechanics of machining: an analytical approach to assessing machinability. Ellis Horwood, Chichester, United Kingdom, 71.
20. Oxley P.L.B.; Welsh M.J.M. (1963) Calculating the shear angle in orthogonal metal cutting from fundamental stress strain strain-rate properties of the work-piece material. In: Proceedings of the Fourth International Conference on Machine Tool Design and Research 73–86.
21. 10.1063/1.166164410.1063/1.1661644 ↗
22. Pawade, R.S.; Joshi, S.S. (2011) Mechanism of chip formation in high-speed turning of Inconel 718. Journal of Materials Science and Technology, 15: 132–152.
23. 10.1103/PhysRevLett.109.10600110.1103/PhysRevLett.109.106001 ↗
24. 10.1016/j.jmatprotec.2013.07.00710.1016/j.jmatprotec.2013.07.007 ↗
25. 10.1016/S0890-6955(02)00046-910.1016/S0890-6955(02)00046-9 ↗
26. 10.1016/j.jmatprotec.2007.05.00710.1016/j.jmatprotec.2007.05.007 ↗
27. Von Turkovich, B.F. (1979) Influence of very high cutting speed on chip formation mechanics. In 7th North American Metalworking Research Conference Proceedings, 13–16 May, 241–247.